I added an additional command to the configuration tool, that creates a simple skin based on the Seasons skin with all the airQ devices found in weewx.conf and displaying the values and the diagrams for them. Simply call sudo airq_conf --create-skin and find the new skin in /etc/weewx/skins/airQ.
Karen K schrieb am Sonntag, 18. Juli 2021 um 21:21:11 UTC+2: > Configuration tool is uploaded to Github. Please, be careful using it. > Don't forget backup. > > Karen K schrieb am Sonntag, 18. Juli 2021 um 18:48:36 UTC+2: > >> CO is really milligram not microgram according to the airQ documentation >> and the display in the airQ app. >> >> Regarding "prefix": If you have more than one airQ device, you need >> different names of the observation types for each of them. That's the >> prefix for. Imagine there are 3 airQ devices, one outside, one in the >> bedroom and one in the living room. Your could configure the outside device >> without prefix to put "co", "co2", "no2", "noise", "o3", "pm1_0", "pm2_5", >> "pm10_0", and "so2" into the predefined columns of the WeeWX database. For >> the bedroom device you could set "prefix = bedroom". So you get >> "bedroom_co", "bedroom_co2" etc. for that device. And for the living room >> device you could set "prefix = livingroom". So you get "livingroom_co", >> "livingroom_co2", etc. for that. To create the appropriate columns in the >> database I prepare a tool. I it is written, but still not tested. I got the >> second shot of Corona vaccination yesterday, and I am still down. >> >> Thank you for the information about installing the crypto modules. In my >> case there was no need to install it separately. But I will include it in >> the documentation. >> >> >> >> >> [email protected] schrieb am Sonntag, 18. Juli 2021 um 07:18:29 UTC+2: >> >>> Guten Morgen, >>> ich habe die Fehler während der Installation beseitigt. auch unter >>> 1. airQ_corant.py Zeile 279 'co': ('co', 'milligram_per_meter_cubed', >>> 'group_concentration',lambda x:x[0]), >>> >>> microgram_per_meter_cubed >>> 2. wie funktioniert das mit dem "prefix" >>> wird dann co oder co2 zu "prefixco" oder "prefixco2" >>> >>> Bei einem Rechner war ich erfolgreich mit der Installation. >>> >>> Danke >>> >>> Hallo, >>> I fixed the errors during the installation. >>> how does that work with that "prefix" >>> >>> I thank you for the very good work >>> >>> A note for installing: "Crypto" >>> $ sudo apt-get install build-essential python3-dev >>> $ pip3 install pycryptodomex >>> $ python3 -m Cryptodome.SelfTest >>> >>> I was successful with the installation on one computer. >>> >>> Thanks >>> Hartmut >>> [email protected] schrieb am Samstag, 17. Juli 2021 um 22:01:22 UTC+2: >>> >>>> From those logs and the removed messages (I read them before they were >>>> removed) I am not sure what is the actual state of your installation. Does >>>> it generally work or not? >>>> >>>> In the moment I write a tool to add the necessary columns to the >>>> database schema. By now the only way is to add the columns >>>> using wee_database one by one. If you do not set a prefix, some data is >>>> already saved to the database like pm1_0, pm2_5, and pm10_0. >>>> >>>> [email protected] schrieb am Samstag, 17. Juli 2021 um 16:16:21 UTC+2: >>>> >>>>> Hallo, >>>>> by >>>>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip >>>>> Request to install 'weewx-airQ.zip' >>>>> Extracting from zip archive weewx-airQ.zip >>>>> Traceback (most recent call last): >>>>> File "./wee_extension", line 88, in <module> >>>>> main() >>>>> File "./wee_extension", line 80, in main >>>>> ext.install_extension(options.install) >>>>> File "/home/weewx/bin/weecfg/extension.py", line 130, in >>>>> install_extension >>>>> self.install_from_dir(extension_dir) >>>>> File "/home/weewx/bin/weecfg/extension.py", line 150, in >>>>> install_from_dir >>>>> installer_path, installer = >>>>> weecfg.get_extension_installer(extension_dir) >>>>> File "/home/weewx/bin/weecfg/__init__.py", line 1851, in >>>>> get_extension_installer >>>>> __import__('install') >>>>> File "/var/tmp/weewx-airQ-master/install.py", line 26 >>>>> '#altitude': 'set_if_not_station_altitude' >>>>> ^ >>>>> SyntaxError: invalid syntax >>>>> >>>>> and >>>>> >>>>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip >>>>> Request to install 'weewx-airQ.zip' >>>>> Extracting from zip archive weewx-airQ.zip >>>>> Traceback (most recent call last): >>>>> File "./wee_extension", line 88, in <module> >>>>> main() >>>>> File "./wee_extension", line 80, in main >>>>> ext.install_extension(options.install) >>>>> File "/home/weewx/bin/weecfg/extension.py", line 130, in >>>>> install_extension >>>>> self.install_from_dir(extension_dir) >>>>> File "/home/weewx/bin/weecfg/extension.py", line 150, in >>>>> install_from_dir >>>>> installer_path, installer = >>>>> weecfg.get_extension_installer(extension_dir) >>>>> File "/home/weewx/bin/weecfg/__init__.py", line 1858, in >>>>> get_extension_installer >>>>> installer = loader() >>>>> File "/var/tmp/weewx-airQ-master/install.py", line 8, in loader >>>>> File "/var/tmp/weewx-airQ-master/install.py", line 12, in __init__ >>>>> NameError: name 'GTSInstaller' is not defined >>>>> >>>>> root@hesba:/home/weewx/bin# ./wee_extension --install weewx-airQ.zip >>>>> Request to install 'weewx-airQ.zip' >>>>> Extracting from zip archive weewx-airQ.zip >>>>> Saving installer file to /home/weewx/bin/user/installer/airQ >>>>> Saved configuration dictionary. Backup copy at >>>>> /home/weewx/weewx.conf.20210717161220 >>>>> Finished installing extension 'weewx-airQ.zip' >>>>> >>>>> how do i get the data into a database >>>>> >>>>> Hartmut >>>>> [email protected] schrieb am Mittwoch, 14. Juli 2021 um 21:29:41 >>>>> UTC+2: >>>>> >>>>>> Thanks for review Karen. I also found this device uRADMonitor » >>>>>> Products <https://www.uradmonitor.com/products/> for similar price. >>>>>> Now the worst part, choose one :) >>>>>> >>>>>> st 14. 7. 2021 v 17:10 odesílatel Karen K <[email protected]> napsal: >>>>>> >>>>>>> [image: dayPM.png] >>>>>>> https://github.com/roe-dl/weewx-airQ >>>>>>> >>>>>>> The device is specified down to -20°C. So, outside usage is >>>>>>> possible, if it is protected against rain. >>>>>>> Karen K schrieb am Sonntag, 11. Juli 2021 um 18:11:39 UTC+2: >>>>>>> >>>>>>>> Some time has passed, and finally I can present the first version >>>>>>>> of a driver (or better: service) to retrieve the data out of the Air-Q >>>>>>>> device of the Corant GmbH. You will find it there: >>>>>>>> >>>>>>>> Service to retrieve data from Air-Q device >>>>>>>> <https://github.com/roe-dl/weewx-airQ> (at Github) >>>>>>>> Web site of the Air-Q device <https://www.air-q.com> (including >>>>>>>> possibility to purchase one) >>>>>>>> >>>>>>>> The configuration is simple. The IP address of the device and the >>>>>>>> password are the only needed parameters. Observations are stored to >>>>>>>> the >>>>>>>> appropriate WeeWX observation types automatically. >>>>>>>> >>>>>>>> If more than one Air-Q device is used, a name prefix can be >>>>>>>> prepended to the observation types to distinguish between the devices. >>>>>>>> That >>>>>>>> way it is possible to store the observations of more than one device >>>>>>>> in the >>>>>>>> same database. >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "weewx-user" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/weewx-user/ljyMS0EQR4k/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/weewx-user/8049deb7-a33b-4428-bc8c-f22a7a769958n%40googlegroups.com >>>>>>> >>>>>>> <https://groups.google.com/d/msgid/weewx-user/8049deb7-a33b-4428-bc8c-f22a7a769958n%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> >>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9e699711-e61e-4175-bbf4-0683a00645d1n%40googlegroups.com.
