For me, I solved the problem.
lsusb on the server (Proxmox, QNAP,...)
Bus 001 Device 004: ID 6666:5555 Prototype product Vendor ID
ls -l /dev/bus/usb/001/004
crw-rw-rw- 1 root root 189, 3 May 24 18:48 /dev/bus/usb/001/004
Then in the lxc configfile: <CT#>.conf enter these two lines:
lxc.cgroup.devices.allow: c 189:* rwm
lxc.mount.entry: /dev/bus/usb/001/004 dev/bus/usb/001/004 none
bind,optional,create=file
In weex.conf:
[Station]
............
station_type = WS28xx
[WS28xx]
# This section is for the La Crosse WS-2800 series of weather stations.
# Radio frequency to use between USB transceiver and console: US or EU
# US uses 915 MHz, EU uses 868.3 MHz. Default is US.
transceiver_frequency = EU
# The station model, e.g., 'LaCrosse C86234' or 'TFA Primus'
model = LaCrosse WS28xx
# The pressure calibration offset, in hPa (millibars)
pressure_offset = 0
# The driver to use:
driver = weewx.drivers.ws28xx
reboot weewx Container
wee_device --pair
press Arrow DOWN on WS-2816 DisplayUnit until Syn will displayed
F. S. schrieb am Montag, 24. Mai 2021 um 17:33:09 UTC+2:
> Same Problem.
> I try to change from WS-2300 to WS-2816
>
> It's a problem of accessrights.
>
> For my WS-2300 I have to add following to the lxc config file to have full
> access to the USB2Serial Adapter bind to /dev/ttyUSB0:
> lxc.cgroup.devices.allow: c 188:* rwm
>
> lxc.cgroup.devices.allow: c 189:* rwm
>
> lxc.mount.entry: /dev/ttyUSB0 dev/ttyUSB0 none bind,optional,create=file
>
> But I don't know what should be configured for the WS-2816, because in the
> syslog there is no Information, which Device I have to use to configure in
> the lxc configfile
> [email protected] schrieb am Dienstag, 2. März 2021 um 21:21:34 UTC+1:
>
>> I've just tried to get my ws28xx running on a debian installation running
>> in a LXC on a QNAP NAS.
>>
>> dmesg shows the dongle was connected:
>> [297714.611821] usb 1-2: new full-speed USB device number 4 using xhci_hcd
>> [297714.893545] hid-generic 0003:6666:5555.0002: hiddev0: USB HID v1.11
>> Device [LA CROSSE TECHNOLOGY Weather Direct Light Wireless Device] on
>> usb-0001:01:00.0-2/input0
>> [297714.938043] [usb.001.004]
>> /sys/devices/platform/soc/fd800000.pcie-external0/pci0001:00/0001:00:00.0/0001:01:00.0/usb1/1-2
>>
>> added.
>>
>> lsusb:
>>
>> Bus 002 Device 001: ID 1d6b:0003
>> Bus 001 Device 004: ID 6666:5555
>> Bus 001 Device 001: ID 1d6b:0002
>>
>>
>> When I start wee_device or weewx I get this exception:
>> Mar 2 21:06:34 debianNAS weewx[23083] INFO weewx.drivers.ws28xx: found
>> transceiver at bus= device=
>> Mar 2 21:06:34 debianNAS weewx[23083] ERROR weewx.engine: Import of
>> driver failed: The device has no langid (<class 'ValueError'>)
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> Traceback (most recent call last):
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/engine.py", line 119, in setupStation
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> self.console = loader_function(config_dict, self)
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 948, in loader
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> return WS28xxDriver(**config_dict[DRIVER_NAME])
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 1294, in __init__
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> self.startUp()
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 1415, in startUp
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> self.serial, comm_interval=self.comm_interval)
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 4020, in setup
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> self.shid.open(vendor_id, product_id, device_id, serial)
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 3072, in open
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> self._open_device(device)
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/share/weewx/weewx/drivers/ws28xx.py", line 3113, in _open_device
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> log.info('manufacturer: %s' %
>> self.devh.getString(dev.iManufacturer,30))
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/lib/python3/dist-packages/usb/legacy.py", line 283, in getString
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> return util.get_string(self.dev, index, langid).encode('ascii')
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> File "/usr/lib/python3/dist-packages/usb/util.py", line 314, in get_string
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> raise ValueError("The device has no langid")
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL weewx.engine: ****
>> ValueError: The device has no langid
>> Mar 2 21:06:34 debianNAS weewx[23083] CRITICAL __main__: Unable to load
>> driver: The device has no langid
>>
>> Is this related to the LXC? Any ideas?
>>
>>
>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/b8b4465d-9329-486e-ba10-cc6cc23eeffbn%40googlegroups.com.
