Yeah, I'm putting it in a Argon ONE M.2 case which has a built-fan. From my experience, just setting a Pi4 on edge is usually enough so it can radiate from the top and bottom surfaces, but for this I want to give it a bit of protection from dust build-up.
With the firmware updates over the past year, the RPi4 is not as sensitive as it originally was. On Sunday, March 7, 2021 at 10:18:13 AM UTC-8 kb1...@gmail.com wrote: > The only thing it gets you is serving the webpage a little quicker. The Pi > 4 runs hot so you'll want a fan on it if you do use one. I have a test > setup running on a Pi zero and it works fine. > > Dave - KB1PVH > > > > > Sent from my Galaxy S21 > > On Sun, Mar 7, 2021, 1:07 PM Christopher Kelley <hang...@gmail.com> wrote: > >> The problem with Pis being so inexpensive is, I've ended up with a few >> extras that I bought "just in case". I've read the documentation, and >> while it's clear WeeWx will run fine on 1Gb (or 512Mb), I also have 2Gb and >> 4Gb Pi4s lying about. >> >> Is there any advantage to a 2Gb or 4Gb Pi4? Not just "I've been running >> on 128Mb for years with no problems", but are there any advantages to >> having more memory, or would it be completely unused? I might have the RPi >> running WeeWx also drive a small display, so there would be that overhead >> as well. >> >> I've already got an external M.2. SATA SSD to boot/run from, so there's >> no worries on the storage / reliability end. >> >> Thanks! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "weewx-user" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to weewx-user+...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/weewx-user/aab83780-7877-4d2c-9090-e61574c2ab84n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/weewx-user/aab83780-7877-4d2c-9090-e61574c2ab84n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f42c74d8-8780-4027-a5fb-0c3b1bb320d7n%40googlegroups.com.
