If 'reset' does a factory reset, I think I agree with you - not too much value in that for me. OTOH, being able to reboot remotely, at least in my case, might be a benefit.
While I understand the ability of Weewx and the GW1000 driver to attempt to reconnect to the gateway. Unfortunately, that doesn't solve the problem if it's alive but unresponsive. Thanks for the reply. Sean On Monday, February 15, 2021 at 8:51:52 PM UTC-8 gjr80 wrote: > Can't speak for Monit, haven't used it and only briefly skimmed an article > on it a year or two back. Whilst the GW1000API has commands to reset and > reboot the device I have not implemented them int he GW1000 driver and I > have been loathed to do so. I really don't see much point in giving the > driver the ability to factory reset the GW1000; if the device is factory > reset you need to use the WS View app to pair/configure the device again so > you might as well goto the device or use the WS View app to factory reset > if such action is warranted. I could see some utility in being able to > reboot the GW1000, but I suspect that in almost all situations where you > would want to take such action you have lost contact with the GW1000 and I > doubt you will be able to command the GW1000 to reboot via the API. > > That being said WeeWX and the GW1000 driver have a couple of features that > attempt recovery if contact with the GW1000 is lost. Firstly, if a driver > cannot be loaded WeeWX has the ability to keep trying to load the driver > every 60 seconds rather than exiting (refer loop_on_init config option > <http://weewx.com/docs/usersguide.htm#General> in weewx.conf). Secondly, > if the GW1000 driver cannot contact the GW1000 on startup, or if contact is > lost during normal operation, the driver re-attempts contact a number of > times and if contact cannot be made the driver will attempt to re-discover > the GW1000 on the network. These may or may not work depending on the > issue, the log would be need to be checked to see what the symptoms were > and what WeeWX/the driver did. > > Ultimately if the GW1000 cannot be contacted and cannot be discovered then > there is not much that can be done short of notifying you to go and hit the > reset button. > > Gary > > On Tuesday, 16 February 2021 at 11:56:49 UTC+10 [email protected] wrote: > >> Not bothering to post logs, etc., because this isn't a "problem" with the >> software. >> >> Been using Weewx for a few years with Acurite 01525 but finally got fed >> up with the horribly flaky RF from sensors to console and recently >> transitioned to Ecowitt and the GW1000 with temp, wind, and rain sensors. >> Loving it so far although the WS View app on Android apparently had a bug >> that initially prevented me from configuring the gateway properly. Kudos to >> the Ecowitt team who were very responsive ([email protected]). >> >> Browsing the weewx-user group I found >> https://github.com/gjr80/weewx-gw1000 and that's a delightful piece of >> code, every bit as good an useful as Weewx itself. >> >> The gateway has gone offline a couple of times in the past 48 hours for >> reasons unknown. Its leds are flashing as if it's online, and it can >> sometimes be pinged so it's on the wlan, but it doesn't respond to API >> requests for the driver. I'd like to monitor the gateway from a monit >> server that I have running on my network and while I can test for the host >> alive and send an alert, I'd really like to monitor the gateway function >> itself somehow. >> >> If it were a linux box under the covers and had access, I could script a >> solution on the gateway itself but I don't think that's possible. I note in >> the GW1000 driver that the command list has a "reset" and "reboot" command >> and wonder if the driver will allow me to send either one of those by >> itself? >> >> Any other suggestions? >> >> Thanks! >> >> Sean >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/fc546e3f-32b7-44ba-8c71-b428d9e7b68fn%40googlegroups.com.
