I am trying to install the WeeWX BC Robotics driver created by Davis Enst and it will not load. Does anyone have detailed instruction on how to load this driver. Thanks Ray
On Tuesday, December 11, 2018 at 10:53:25 PM UTC-5 [email protected] wrote: > I recently came across a really excellent solution for putting together > your own weather station on the cheap with high quality sensors - and most > importantly a very useful weather HAT to use with a Raspberry PI to connect > all the sensors. > > It comes complete with a 4 part step by step tutorial to assemble the > whole station, and basic code to upload the data to and online service - > see link below: > > https://www.bc-robotics.com/tutorials/raspberry-pi-weather-station-part-1/ > > I completed my own installation based on the instructions in the tutorial > and my station running on weewx is active at the link below > > http://peachlandweather.ca/mystation/ > > For the outdoor portion I used a Raspberry Pi Zero W, with the weather > HAT. Weewx is running indoors in a FreeBSD jail, using a stock Interceptor > driver. I modified the basic upload code provided in the tutorial quite > extensively to generate upload loops that matched the Observer URLs > supported by the Interceptor driver, and also to produce derived > observations not included in the original code. > > The upload code is attached for anyone who might be interested in trying > to assemble their own. > > I tested the results from using the station against my Vantage Pro 2 and > so far it seems to be pretty close - for less than 20% of the cost of a > Vantage Pro. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/49254061-99b9-4e41-a2c9-9f8139944396n%40googlegroups.com.
