Karen, When you have a moment I would be interested in the devices you are using to measure water level and flow.
> On 23 Jan, 2021, at 16:18, Karen K <kk4468...@gmail.com> wrote: > > I installed MQTTSubscribe service. In this case it provides data about water > level (unit cm) and water flow (unit cubic meter per second) of the near > river. > > As those units and unit group are not included in the standard weewx I have > to assign them elsewhere. > > Because I use the MQTTSubscribe service, there is no need to write an > extension. On the other hand, no extension file means no place to put the > assignment of the additional units and unit groups. > > Could I declare those units and unit groups somewhere in weewx.conf? > > Is there any other possibility? > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com > <mailto:weewx-user+unsubscr...@googlegroups.com>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/6bb4393f-6685-4088-ae0a-90d2f79619b8n%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/6bb4393f-6685-4088-ae0a-90d2f79619b8n%40googlegroups.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/8FA86ECF-33D8-4F8A-80DE-6F79C606F51C%40gmail.com.
