Hi, Gary. I have also been affected by this change and, fortunately, your solution fixed my problem. Do you know if this is a temporary regression that will require me to change my .conf again (back to the pre-4.2.0 way) in the near future? Or is this expected to be a permanent change?
Thanks! -- Greg On Tuesday, November 17, 2020 at 12:52:40 AM UTC-5 gjr80 wrote: > Bill, > > There was a change to the StdWXCalculate service in 4.2.0 that has > inadvertently changed the operation of ignore_zero_wind. Normal (expected) > operation should resume if you change the ignore_zero_wind setting to be > the opposite of its current value (ie if under 4.1.1 or earlier you > had ignore_zero_wind = False change it to ignore_zero_wind = True or if you > had ignore_zero_wind = True change it to ignore_zero_wind = False). > > If you don’t use ignore_zero_wind you are not affected by the change and > need do nothing. > > Gary > > On Tuesday, 17 November 2020 at 14:20:55 UTC+10 wa4...@gmail.com wrote: > >> I have three pi's running weewx, two have been moved up to 4.2.0, one is >> still on 4.1.1. All have ignore_zero_wind set to False. The two that are on >> 4.2.0 no longer work as expected (zero wind shows wind direction) but the >> 4.1.1 still works as expected. >> >> Did something happen in 4.2.0 that changed the behavior of >> ignore_zero_wind = False? > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/4ceddcb1-fea7-4061-8f36-91abeb0fc152n%40googlegroups.com.
