Wow!
that *tlsv12* has really helped! now tail -f is showing no errors.
just to be sure - server_url = mqtt://pi:password@url:8883/
URL can be localhost, or should I use my https:// webpage
"jastrabie.online"?
My Belchertown settings still does not work:
# MQTT Websockets defaults
mqtt_websockets_enabled = 1
mqtt_websockets_host = "jastrabie.online"
mqtt_websockets_port = 9001
mqtt_websockets_ssl = 1
mqtt_websockets_topic = "weather/loop"
disconnect_live_website_visitor = 1800000
webpage debugger shows this:
WebSocket connection to 'wss://jastrabie.online:9001/mqtt' failed:
Connection closed before receiving a handshake response
d._doConnect @ paho-mqtt.min.js:37
d.connect @ paho-mqtt.min.js:31
Client.connect @ paho-mqtt.min.js:70
connect @ belchertown.js?1608760733:1308
(anonymous) @ (index):156
l @ jquery.min.js:2
c @ jquery.min.js:2
Thank you!
Michal
Dátum: streda 23. decembra 2020, čas: 22:47:56 UTC+1, odosielateľ:
mh081...@gmail.com
> I mean
>
>
> [[MQTT]]
> server_url = mqtt://pi:password@url:8883/
> topic = weather
> unit_system = METRIC
> binding = archive, loop
> aggregation = aggregate
> log_success = False
> log_failure = True
> [[[tls]]]
> tls_version = tlsv12
> ca_certs = /etc/ssl/certs/ca-certificates.crt
> [[[inputs]]]
> [[[[dayRain]]]]
> name = dayRain_mm
> units = mm
> [[[[rainRate]]]]
> name = rainRate_mm_per_hour
> units = mm_per_hour
>
>
> mh081...@gmail.com schrieb am Mittwoch, 23. Dezember 2020 um 22:44:59
> UTC+1:
>
>> Hi,
>>
>> have you set tlsv12 in weewx.conf under [[MQTT]] Section?
>>
>> Like
>>
>>
>>
>> misk...@gmail.com schrieb am Mittwoch, 23. Dezember 2020 um 22:36:27
>> UTC+1:
>>
>>> Thank you Greg,
>>> so I have tried:
>>> pi@WeeWX:~ $ mosquitto_pub -h localhost -p 8883 -t "weather/test" -m
>>> "hello world. this is to the weather topic with authentication" -u "pi" -P
>>> "<passwd>" -d
>>> Client mosqpub|24614-WeeWX sending CONNECT
>>> Error: The connection was lost.
>>>
>>> with port 1883 it works:
>>>
>>> pi@WeeWX:~ $ mosquitto_pub -h localhost -p 1883 -t "weather/test" -m
>>> "hello world. this is to the weather topic with authentication" -u "pi" -P
>>> " <passwd> " -d
>>> Client mosqpub|24645-WeeWX sending CONNECT
>>> Client mosqpub|24645-WeeWX received CONNACK (0)
>>> Client mosqpub|24645-WeeWX sending PUBLISH (d0, q0, r0, m1,
>>> 'weather/test', ... (61 bytes))
>>> Client mosqpub|24645-WeeWX sending DISCONNECT
>>>
>>> mosquitto_sub is like:
>>> pi@WeeWX:~ $ mosquitto_sub -h localhost -p 8883 -t weather/# -d
>>> Client mosqsub|24569-WeeWX sending CONNECT
>>> Client mosqsub|24569-WeeWX sending CONNECT
>>>
>>> again, with port 1883 it works:
>>> pi@WeeWX:~ $ mosquitto_sub -h localhost -p 1883 -t weather/# -d
>>> Client mosqsub|24659-WeeWX sending CONNECT
>>> Client mosqsub|24659-WeeWX received CONNACK (0)
>>> Client mosqsub|24659-WeeWX sending SUBSCRIBE (Mid: 1, Topic: weather/#,
>>> QoS: 0)
>>> Client mosqsub|24659-WeeWX received SUBACK
>>> Subscribed (mid: 1): 0
>>>
>>> I have installed tcpdump, which parameters am I looking for?
>>>
>>> Thanks,
>>> Michal
>>>
>>> Dátum: streda 23. decembra 2020, čas: 20:55:28 UTC+1, odosielateľ: Greg
>>> Troxel
>>>
>>>>
>>>> Hard to say what's wrong, but use mosquitto_publish to test. I have
>>>> the emqtt extension publishing to mqtt/tls just fine and I do not run
>>>> mqtt w/o ssl at all.
>>>>
>>>> Turn on logging on th broker, and look with tcpdump.
>>>>
>>>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/31a79675-a503-4997-9abf-b8611b869763n%40googlegroups.com.
