Thank you for your replies, Ian and Vince. Was out of town for the holiday and will investigate according to your answers. I appreciate your help.
On Fri, Nov 27, 2020, 8:42 AM ian...@kinnon.org <ian....@kinnon.org> wrote: > I am no expert, but sounds like it might be a web server issue rather than > weewx/belchertown > > Are you see anything in your web server logs? > I am running weewx with belchertown on a raspberry pi Debian 10.6 and my > apache logs are in > /var/log/apache2 > check for access.log and error.log > > Ian > > On Tuesday, 24 November 2020 at 15:06:36 UTC lecoqacr...@gmail.com wrote: > >> Is there no answer to this issue? Pretty sure that it should be a simple >> fix if someone can point me in the right direction. >> the seasons skin shows all graphs but the belchertown only has the output >> above of the " Parent directory etc." for graphs, records, reports. >> Tried on weewx 3.9 with same results using debian install. >> On Saturday, November 21, 2020 at 12:10:58 AM UTC-6 lecoqacr...@gmail.com >> wrote: >> >>> Have weewx installed on Raspberry pi as a new install using the setup.py >>> method. >>> Was trying to test the Belchertown skin after an install according to >>> instructions. >>> The home screen of Belchertown looks normal but the Reports, Graphs and >>> Records tabs only bring up the following : >>> Index of /home/weewx/public_html/graphs/ >>> NameSizeDate Modified >>> index.html <http:///home/weewx/public_html/graphs/index.html> >>> 13.5 kB >>> 11/20/20, 10:45:19 PM >>> >>> Weewx.conf is as follows for the StdReport section >>> [StdReport] >>> >>> # Where the skins reside, relative to WEEWX_ROOT >>> SKIN_ROOT = /home/weewx/skins/ >>> >>> # Where the generated reports should go, relative to WEEWX_ROOT >>> HTML_ROOT = /home/weewx/public_html/ >>> >>> # The database binding indicates which data should be used in >>> reports. >>> data_binding = wx_binding >>> >>> # Whether to log a successful operation >>> log_success = True >>> >>> # Whether to log an unsuccessful operation >>> log_failure = False >>> >>> # Each of the following subsections defines a report that will be >>> run. >>> # See the customizing guide to change the units, plot types and line >>> # colors, modify the fonts, display additional sensor data, and other >>> # customizations. Many of those changes can be made here by >>> overriding >>> # parameters, or by modifying templates within the skin itself. >>> >>> [[SeasonsReport]] >>> # The SeasonsReport uses the 'Seasons' skin, which contains the >>> # images, templates and plots for the report. >>> skin = Seasons >>> enable = false >>> >>> [[SmartphoneReport]] >>> # The SmartphoneReport uses the 'Smartphone' skin, and the >>> images and >>> # files are placed in a dedicated subdirectory. >>> skin = Smartphone >>> enable = false >>> HTML_ROOT = public_html/smartphone >>> >>> [[MobileReport]] >>> # The MobileReport uses the 'Mobile' skin, and the images and >>> files >>> # are placed in a dedicated subdirectory. >>> skin = Mobile >>> enable = false >>> HTML_ROOT = public_html/mobile >>> >>> [[StandardReport]] >>> # This is the old "Standard" skin. By default, it is not enabled. >>> skin = Standard >>> enable = false >>> [[Belchertown]] >>> skin = Belchertown >>> HTML_ROOT = /home/weewx/public_html/Belchertown >>> enable = true >>> >>> [[FTP]] >>> # FTP'ing the results to a webserver is treated as just another >>> report, >>> # albeit one with an unusual report generator! >>> skin = Ftp >>> >>> # If you wish to use FTP, set "enable" to "true", then >>> # fill out the next four lines. >>> # Use quotes around passwords to guard against parsing errors. >>> enable = false >>> user = replace_me >>> password = replace_me >>> server = replace_me # The ftp server name, e.g, >>> www.myserver.org >>> path = replace_me # The destination directory, e.g., /weather >>> >>> # Set to True for an FTP over TLS (FTPS) connection. Not all >>> servers >>> # support this. >>> secure_ftp = False >>> >>> # To upload files from something other than what HTML_ROOT is set >>> # to above, specify a different HTML_ROOT here. >>> #HTML_ROOT = public_html >>> >>> # Most FTP servers use port 21 >>> port = 21 >>> >>> # Set to 1 to use passive mode, zero for active mode >>> passive = 1 >>> >>> [[RSYNC]] >>> # rsync'ing to a webserver is treated as just another report >>> skin = Rsync >>> >>> # If you wish to use rsync, you must configure passwordless ssh >>> using >>> # public/private key authentication from the user account that >>> weewx >>> # runs to the user account on the remote machine where the files >>> # will be copied. >>> # >>> # If you wish to use rsync, set "enable" to "true", then >>> # fill out server, user, and path. >>> # The server should appear in your .ssh/config file. >>> # The user is the username used in the identity file. >>> # The path is the destination directory, such as >>> /var/www/html/weather. >>> # Be sure that the user has write permissions on the destination! >>> enable = false >>> server = replace_me >>> user = replace_me >>> path = replace_me >>> >>> # To upload files from something other than what HTML_ROOT is set >>> # to above, specify a different HTML_ROOT here. >>> #HTML_ROOT = public_html >>> >>> # Rsync can be configured to remove files from the remote server >>> if >>> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if >>> you >>> # make a mistake in the remote path, you could could >>> unintentionally >>> # cause unrelated files to be deleted. Set to 1 to enable remote >>> file >>> # deletion, zero to allow files to accumulate remotely. >>> delete = 0 >>> What am I missing in my setup to not get the graphs or record plots >>> to show? >>> Thank you >>> >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/326d98b7-6c07-4591-9828-8e67dad6171en%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/326d98b7-6c07-4591-9828-8e67dad6171en%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAGW8XMQ27Az0NVdxFVSYbxyyKXiZncwP%2Bgx4gCo%2Bs7Led43HNQ%40mail.gmail.com.
