I'm using the ethernet dongle for this device, the one Davis just discontinued - WeatherLinkIP datalogger. (I just noticed that Davis has a firmware update for this but haven't installed it as I don't use their cloud services.) I do have a static IP assigned to the IP logger mac - that works fine and is why I use nmap to test if it is alive. Cheers!
On Monday, November 16, 2020 at 7:55:50 PM UTC-8 Dan'l B wrote: > You don’t mention if you are connection to the Vantage via wi-fi > (Meteobridge NANO or similar) or a TP-link 3020 (or similar) flashed with > Metoebridge, or something else. > > If you are using a Meteobridge NANO that relies on wi-fi, set your router > to use a specific channel. I had these troubles for a long time until I did > that, and it *seems* to have fixed it, so far. > > Otherwise, give the Vantage a fixed IP tied to the MAC address of the > connection to the Vantage. > > On 16 Nov, 2020, at 21:26, John S <jser...@gmail.com> wrote: > > This didn't end as well as I thought it would. After running OK for a few > weeks, things went wonky again. I do not have a good idea of why, I did > upgrade to 4.2.0 but don't think that really had anything to do with it, in > fact, I was hoping it would fix the ip-read errors I'm seeing. > The scenario is pretty much the same, the system chugs along well for a > few hours then I see either the ip-read error or a broken pipe error > message and the software doesn't recover nor does it finish its loops and > publish data. > But, I have another work around that is working fine for the last 24 > hours. While trouble shooting this, I noticed weewx will collect any old > interval data and store it in the db, this is normal behaviour. The ip-read > error or broken pipe error occurs later in the cycle. > So, if I run weewx_reports /etc/weewx/weewx.conf, that will pick up all > the data and format the output then FTP it to my website. > I added a few lines to the crontab to do this for me: > SHELL=/bin/sh > PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin > > # Example of job definition: > # .---------------- minute (0 - 59) > # | .------------- hour (0 - 23) > # | | .---------- day of month (1 - 31) > # | | | .------- month (1 - 12) OR jan,feb,mar,apr ... > # | | | | .---- day of week (0 - 6) (Sunday=0 or 7) OR > sun,mon,tue,wed,thu,fri,sat > # | | | | | > # * * * * * user-name command to be executed > 0,15,30,45 * * * * root /etc/init.d/weewx restart > 10,25,40,55 * * * * root wee_reports /etc/weewx/weewx.conf > /dev/null > > Now, I get an update pushed to web by the wee_reports containing the > archive interval data at 15 minutes. > Let me know if you see any issues with this method. > > Also, I have been using "nmap -p 22222 192.168.42.66" to test if the Davis > VP2 is alive and have rarely found it offline. Statistics returned by nmap > are interesting, sometimes the query takes a milliseconds longer than other > times, but seldom is it down. I'm not sure why the weewx vantage driver > 3.2.1 fails on this new router, but at least there is a workaround. > > Also, I've upgraded to Ubuntu 20.04 Focal hoping for help but no cigar. > > Cheers, > John > > On Tuesday, September 1, 2020 at 10:12:36 PM UTC-7 John S wrote: > >> Weewx 4.1.1 running on ubuntu 18.04 with a Vantage PRO station. >> INFO __main__: Initializing weewx version 4.1.1 >> Using Python 2.7.17 (default, Jul 20 2020, 15:37:01) #012[GCC 7.5.0] >> Platform Linux-4.15.0-112-generic-x86_64-with-Ubuntu-18.04-bionic >> weewx.drivers.vantage: Driver version is 3.2.1 >> >> I waited for a long time for fiber to be installed in the neighborhood >> and when it happened I knew there would be a few challenges due to the new >> modem. >> I documented all my firewall settings from the old router and after a bit >> of twiddling was able to punch in the right setup on the new SMART/RG >> SR516ac for all my needs. >> Or so I thought, weewx would intermittently fail with a driver load error >> >> *ERROR weewx.drivers.vantage: ip-read error: timed out* >> and >> *ERROR weewx.drivers.vantage: LOOP try #4; error: Expected 99 characters; >> got zero instead* >> and >> *ERROR weewx.drivers.vantage: Socket error while opening port 22222 to >> ethernet host 192.168.42.66.* >> * CRITICAL __main__: Unable to load driver: [Errno 113] No route to host* >> >> I had set that Vantage to a static IP address from the pool on the router. >> So I upgraded to 4.1.1 just to see if there was any advantage there. It >> reacted pretty much the same, unpredictable disconnects which required a >> restart. >> I rechecked my router setup, I had opened port 22 and so I added 22222. >> That helped a little bit but I was still getting dropped. >> >> I finally changed a couple of things in the weewx.conf: >> # How long to wait before timing out a socket (FTP, HTTP) connection >> # was 60 >> socket_timeout = 360 >> and >> # How long to wait for a response from the station before giving up (in >> # seconds; must be greater than 2) (was 10) >> timeout = 100 >> >> With these two changes my setup doesn't lose its connection and keeps >> trying to connect. I can see in the signal quality graphic on line that >> there are some burps but it seems to recover well, currently up and running >> over 8 days. I'm hopeful that this is it, and will continue to function >> properly. >> >> I also hope this might help others who can't maintain a good connection >> to their Vantage PRO. >> >> > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to weewx-user+...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/2a8f6ff2-8b44-4dd1-9bee-b3272c598debn%40googlegroups.com > > <https://groups.google.com/d/msgid/weewx-user/2a8f6ff2-8b44-4dd1-9bee-b3272c598debn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9f1eb0a2-d774-4cfb-87ec-676d6365ae06n%40googlegroups.com.
