Where did you put the module extra_sensors_service.py? Under [[Services]]
you have
data_services = weewx.extra_sensors_service.ExtraSensorsService,
This means that the engine will be expecting to find it in
/home/weewx/bin/weewx/extra_sensors_service.py.
This is not a great place for it because it will be lost on the next
upgrade. A better place is to put it in /home/weewx/bin/user. Modules there
are preserved across an upgrade.
Then the option "data_services" becomes
data_services = user.extra_sensors_service.ExtraSensorsService,
-tk
On Thu, Aug 27, 2020 at 10:49 AM Michael Grossie <[email protected]>
wrote:
> Raspberry Pi 2B+
> Install with setup.py
> Station - Simulator (Originally)
> Weewx - 4.1.1
> PATH - Home/Weewx
>
> Had the weewx setup and working perfectly (as far as I know) with the
> Simulator weather station while I waited for my ADS-WS1 to arrive. When it
> arrived, I connected it via the directions found in an Instructables
> Raspberry Pi Weather Station document.
>
> Confirmed that the ADS-WS1 was functioning via running the Wxconfig file
> from ADS with the WS1 connected to a Windows 10 Computer.
>
> Connected the WS1 to the Raspberry Pi with serial to USB cable. Set the
> ttyUSB0 port on the Raspberry Pi to 2400 8N1. Using Minicom, confirmed that
> data was flowing from the WS1.
>
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A302DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A302DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
> !!0000001F0000000023A402DD0000015E0000000000000000
>
> Changed the weewx configuration file using *sudo python3 ./bin/wee_config
> --reconfigure *to indicate the WS1 as the weather station being used.
> Deleted the weewx.sdb folder from home/weewx/archive.
>
> When attempting to start weewx with *sudo /home/weewx/bin/weewxd* I
> receive the following -
>
> $ sudo python /home/weewx/bin/weewxd
> Traceback (most recent call last):
> File "/home/weewx/bin/weewxd", line 261, in <module>
> main()
> File "/home/weewx/bin/weewxd", line 148, in main
> engine = weewx.engine.StdEngine(config_dict)
> File "/home/weewx/bin/weewx/engine.py", line 75, in __init__
> self.loadServices(config_dict)
> File "/home/weewx/bin/weewx/engine.py", line 138, in loadServices
> obj = weeutil.weeutil.get_object(svc)(self,config_dict)
> File "/home/weewx/bin/weeutil/weeutil.py", line 1093, in get_object
> mod = __import__(module)
> ImportError: No module named extra_sensors_service
>
> Running - *sudo /etc/init.d/weewx status -ls* provides -
>
> weewx.service - LSB: weewx weather system
> Loaded: loaded (/etc/init.d/weewx; generated; vendor preset: enabled)
> Active: active (exited) since Thu 2020-08-27 11:25:07 CDT; 1h 12min ago
> Docs: man:systemd-sysv-generator(8)
> Process: 22526 ExecReload=/etc/init.d/weewx reload (code=exited,
> status=0/SUCCESS)
> Process: 295 ExecStart=/etc/init.d/weewx start (code=exited,
> status=0/SUCCESS)
>
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** File "/home/weewx/bin/weewx/engine.py", line 138, in loadServices
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** obj = weeutil.weeutil.get_object(svc)(self,config_dict)
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** File "/home/weewx/bin/weeutil/weeutil.py", line 1093, in get_object
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** mod = __import__(module)
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** ImportError: No module named extra_sensors_service
> Aug 27 11:25:08 raspberrypi weewxd[562]: weewx[562] CRITICAL __main__:
> **** Exiting.
> Aug 27 12:11:44 raspberrypi systemd[1]: Reloading LSB: weewx weather
> system.
> Aug 27 12:11:44 raspberrypi weewx[22526]: Reloading weewx weather system:
> weewxstart-stop-daemon: warning: failed to kill 562: No such process
> Aug 27 12:11:44 raspberrypi weewx[22526]: .
> Aug 27 12:11:44 raspberrypi systemd[1]: Reloaded LSB: weewx weather system.
>
> The ImportError No module named extra_sensors_service - was not there when
> using the Simulator weather station. This is referring to a DHT-22 that is
> connected to the Raspberry Pi and was "working" with the Simulator weather
> station.
>
> As weewx does not start, the home/weewx/archive/weewx.sdb has not been
> recreated.
>
> *Configuration file is below.*
>
> # WEEWX CONFIGURATION FILE
> #
> # Copyright (c) 2009-2019 Tom Keffer
> # See the file LICENSE.txt for your rights.
>
>
> ##############################################################################
>
> # This section is for general configuration information.
>
> # Set to 1 for extra debug info, otherwise comment it out or set to zero
> debug = 1
>
> # Root directory of the weewx data file hierarchy for this station
> WEEWX_ROOT = /home/weewx
>
> # Whether to log successful operations
> log_success = True
>
> # Whether to log unsuccessful operations
> log_failure = True
>
> # How long to wait before timing out a socket (FTP, HTTP) connection
> socket_timeout = 20
>
> # Do not modify this. It is used when installing and updating weewx.
> version = 4.1.1
>
>
> ##############################################################################
>
> # This section is for information about the station.
>
> [Station]
>
> # Description of the station location
> location = "Casita - Yuma, AZ"
>
> # Latitude in decimal degrees. Negative for southern hemisphere
> latitude = 31.6288
> # Longitude in decimal degrees. Negative for western hemisphere.
> longitude = -114.4056
>
> # Altitude of the station, with unit it is in. This is downloaded from
> # from the station if the hardware supports it.
> altitude = 424, foot # Choose 'foot' or 'meter' for unit
>
> # Set to type of station hardware. There must be a corresponding stanza
> # in this file with a 'driver' parameter indicating the driver to be
> used.
> station_type = WS1
>
> # If you have a website, you may specify an URL
> station_url = http://www.grossie.net
>
> # The start of the rain year (1=January; 10=October, etc.). This is
> # downloaded from the station if the hardware supports it.
> rain_year_start = 1
>
> # Start of week (0=Monday, 6=Sunday)
> week_start = 6
>
>
> ##############################################################################
>
> [WS1]
> # This section is for the ADS WS1 series of weather stations.
>
> # Driver mode - tcp, udp, or serial
> mode = serial
>
> # If serial, specify the serial port device. (ex. /dev/ttyS0,
> /dev/ttyUSB0,
> # or /dev/cuaU0)
> # If TCP, specify the IP address and port number. (ex.
> 192.168.36.25:3000)
> port = /dev/ttyUSB0
>
> # The amount of time, in seconds, before the connection fails if there
> is
> # no response
> timeout = 10
>
> # The driver to use:
> driver = weewx.drivers.ws1
>
>
> ##############################################################################
>
> [Simulator]
> # This section is for the weewx weather station simulator
>
> # The time (in seconds) between LOOP packets.
> loop_interval = 2.5
>
> # The simulator mode can be either 'simulator' or 'generator'.
> # Real-time simulator. Sleep between each LOOP packet.
> mode = simulator
> # Generator. Emit LOOP packets as fast as possible (useful for
> testing).
> #mode = generator
>
> # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the
> default
> # is to use the present time.
> #start = 2011-01-01T00:00
>
> # The driver to use:
> driver = weewx.drivers.simulator
>
>
> ##############################################################################
>
> # This section is for uploading data to Internet sites
>
> [StdRESTful]
>
> [[StationRegistry]]
> # To register this weather station with weewx, set this to true
> register_this_station = true
>
> [[AWEKAS]]
> # This section is for configuring posts to AWEKAS.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a username and password.
> # To guard against parsing errors, put the password in quotes.
> enable = false
> username = replace_me
> password = replace_me
>
> [[CWOP]]
> # This section is for configuring posts to CWOP.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify the station ID (e.g., CW1234).
> enable = false
> station = replace_me
>
> # If this is an APRS (radio amateur) station, uncomment
> # the following and replace with a passcode (e.g., 12345).
> #passcode = replace_me (APRS stations only)
>
> [[PWSweather]]
> # This section is for configuring posts to PWSweather.com.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station and password.
> # To guard against parsing errors, put the password in quotes.
> enable = false
> station = replace_me
> password = replace_me
>
> [[WOW]]
> # This section is for configuring posts to WOW.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station and password.
> # To guard against parsing errors, put the password in quotes.
> enable = false
> station = replace_me
> password = replace_me
>
> [[Wunderground]]
> # This section is for configuring posts to the Weather Underground.
>
> # If you wish to do this, set the option 'enable' to true,
> # and specify a station (e.g., 'KORHOODR3') and password.
> # To guard against parsing errors, put the password in quotes.
> enable = false
> station = replace_me
> password = replace_me
>
> # If you plan on using wunderfixer, set the following
> # to your API key:
> api_key = replace_me
>
> # Set the following to True to have weewx use the WU "Rapidfire"
> # protocol. Not all hardware can support it. See the User's Guide.
> rapidfire = False
>
>
> ##############################################################################
>
> # This section specifies what reports, using which skins, to generate.
>
> [StdReport]
>
> # Where the skins reside, relative to WEEWX_ROOT
> SKIN_ROOT = skins
>
> # Where the generated reports should go, relative to WEEWX_ROOT
> HTML_ROOT = public_html
>
> # The database binding indicates which data should be used in reports.
> data_binding = wx_binding
>
> # Whether to log a successful operation
> log_success = True
>
> # Whether to log an unsuccessful operation
> log_failure = False
>
> # Each of the following subsections defines a report that will be run.
> # See the customizing guide to change the units, plot types and line
> # colors, modify the fonts, display additional sensor data, and other
> # customizations. Many of those changes can be made here by overriding
> # parameters, or by modifying templates within the skin itself.
>
> [[SeasonsReport]]
> # The SeasonsReport uses the 'Seasons' skin, which contains the
> # images, templates and plots for the report.
> skin = Seasons
> enable = true
>
> [[SmartphoneReport]]
> # The SmartphoneReport uses the 'Smartphone' skin, and the images
> and
> # files are placed in a dedicated subdirectory.
> skin = Smartphone
> enable = true
> HTML_ROOT = public_html/smartphone
>
> [[MobileReport]]
> # The MobileReport uses the 'Mobile' skin, and the images and files
> # are placed in a dedicated subdirectory.
> skin = Mobile
> enable = true
> HTML_ROOT = public_html/mobile
>
> [[StandardReport]]
> # This is the old "Standard" skin. By default, it is not enabled.
> skin = Standard
> enable = false
>
> [[FTP]]
> # FTP'ing the results to a webserver is treated as just another
> report,
> # albeit one with an unusual report generator!
> skin = Ftp
>
> # If you wish to use FTP, set "enable" to "true", then
> # fill out the next four lines.
> # Use quotes around passwords to guard against parsing errors.
> enable = false
> user = replace_me
> password = replace_me
> server = replace_me # The ftp server name, e.g,
> www.myserver.org
> path = replace_me # The destination directory, e.g., /weather
>
> # Set to True for an FTP over TLS (FTPS) connection. Not all
> servers
> # support this.
> secure_ftp = False
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = public_html
>
> # Most FTP servers use port 21
> port = 21
>
> # Set to 1 to use passive mode, zero for active mode
> passive = 1
>
> [[RSYNC]]
> # rsync'ing to a webserver is treated as just another report
> skin = Rsync
>
> # If you wish to use rsync, you must configure passwordless ssh
> using
> # public/private key authentication from the user account that
> weewx
> # runs to the user account on the remote machine where the files
> # will be copied.
> #
> # If you wish to use rsync, set "enable" to "true", then
> # fill out server, user, and path.
> # The server should appear in your .ssh/config file.
> # The user is the username used in the identity file.
> # The path is the destination directory, such as
> /var/www/html/weather.
> # Be sure that the user has write permissions on the destination!
> enable = false
> server = replace_me
> user = replace_me
> path = replace_me
>
> # To upload files from something other than what HTML_ROOT is set
> # to above, specify a different HTML_ROOT here.
> #HTML_ROOT = public_html
>
> # Rsync can be configured to remove files from the remote server if
> # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if
> you
> # make a mistake in the remote path, you could could
> unintentionally
> # cause unrelated files to be deleted. Set to 1 to enable remote
> file
> # deletion, zero to allow files to accumulate remotely.
> delete = 0
>
> ####
>
> # Various options for customizing your reports.
>
> [[Defaults]]
>
> [[[Units]]]
>
> # The following section sets what unit to use for each unit
> group.
> # NB: The unit is always in the singular. I.e.,
> 'mile_per_hour',
> # NOT 'miles_per_hour'
> [[[[Groups]]]]
>
> group_altitude = foot # Options are 'foot' or 'meter'
> group_degree_day = degree_F_day # Options are
> 'degree_F_day' or 'degree_C_day'
> group_distance = mile # Options are 'mile' or 'km'
> group_pressure = inHg # Options are 'inHg', 'mmHg',
> 'mbar', or 'hPa'
> group_rain = inch # Options are 'inch', 'cm', or 'mm'
> group_rainrate = inch_per_hour # Options are
> 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour'
> group_speed = mile_per_hour # Options are
> 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second'
> group_speed2 = mile_per_hour2 # Options are
> 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2'
> group_temperature = degree_F # Options are 'degree_F'
> or 'degree_C'
>
> # The following section sets the formatting for each type of
> unit.
> [[[[StringFormats]]]]
>
> centibar = %.0f
> cm = %.2f
> cm_per_hour = %.2f
> degree_C = %.1f
> degree_F = %.1f
> degree_compass = %.0f
> foot = %.0f
> hPa = %.1f
> hour = %.1f
> inHg = %.3f
> inch = %.2f
> inch_per_hour = %.2f
> km = %.1f
> km_per_hour = %.0f
> km_per_hour2 = %.1f
> knot = %.0f
> knot2 = %.1f
> mbar = %.1f
> meter = %.0f
> meter_per_second = %.1f
> meter_per_second2 = %.1f
> mile = %.1f
> mile_per_hour = %.0f
> mile_per_hour2 = %.1f
> mm = %.1f
> mmHg = %.1f
> mm_per_hour = %.1f
> percent = %.0f
> second = %.0f
> uv_index = %.1f
> volt = %.1f
> watt_per_meter_squared = %.0f
> NONE = " N/A"
>
> # The following section overrides the label used for each type
> of unit
> [[[[Labels]]]]
>
> meter = " meter", " meters" # You may prefer "metre".
> day = " day", " days"
> hour = " hour", " hours"
> minute = " minute", " minutes"
> second = " second", " seconds"
> NONE = ""
>
> # The following section sets the format for each time scale.
> # The values below will work in every locale, but they may not
> look
> # particularly attractive.
> [[[[TimeFormats]]]]
>
> hour = %H:%M
> day = %X
> week = %X (%A)
> month = %x %X
> year = %x %X
> rainyear = %x %X
> current = %x %X
> ephem_day = %X
> ephem_year = %x %X
>
> [[[[Ordinates]]]]
>
> # Ordinal directions. The last one is for no wind direction
> directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW,
> WSW, W, WNW, NW, NNW, N/A
>
> # The following section sets the base temperatures used for the
> # calculation of heating, cooling, and growing degree-days.
> [[[[DegreeDays]]]]
>
> # Base temperature for heating days, with unit:
> heating_base = 65, degree_F
> # Base temperature for cooling days, with unit:
> cooling_base = 65, degree_F
> # Base temperature for growing days, with unit:
> growing_base = 50, degree_F
>
> # A trend takes a difference across a time period. The
> following
> # section sets the time period, and how big an error is
> allowed to
> # still be counted as the start or end of a period.
> [[[[Trend]]]]
>
> time_delta = 10800 # 3 hours
> time_grace = 300 # 5 minutes
>
> # The labels to be used for each observation type
> [[[Labels]]]
>
> # Set to hemisphere abbreviations suitable for your location:
> hemispheres = N, S, E, W
>
> # Formats to be used for latitude whole degrees, longitude
> whole
> # degrees, and minutes:
> latlon_formats = %02d, %03d, %05.2f
>
> # Generic labels, keyed by an observation type.
> [[[[Generic]]]]
> barometer = Barometer
> dewpoint = Dew Point
> ET = ET
> heatindex = Heat Index
> inHumidity = Inside Humidity
> inTemp = Inside Temperature
> outHumidity = Humidity
> outTemp = Outside Temperature
> radiation = Radiation
> rain = Rain
> rainRate = Rain Rate
> UV = UV Index
> windDir = Wind Direction
> windGust = Gust Speed
> windGustDir = Gust Direction
> windSpeed = Wind Speed
> windchill = Wind Chill
> windgustvec = Gust Vector
> windvec = Wind Vector
> extraTemp1 = Temperature1
> extraTemp2 = Temperature2
> extraTemp3 = Temperature3
>
> # Sensor status indicators
>
> rxCheckPercent = Signal Quality
> txBatteryStatus = Transmitter Battery
> windBatteryStatus = Wind Battery
> rainBatteryStatus = Rain Battery
> outTempBatteryStatus = Outside Temperature Battery
> inTempBatteryStatus = Inside Temperature Battery
> consBatteryVoltage = Console Battery
> heatingVoltage = Heating Battery
> supplyVoltage = Supply Voltage
> referenceVoltage = Reference Voltage
>
> [[[Almanac]]]
>
> # The labels to be used for the phases of the moon:
> moon_phases = New, Waxing crescent, First quarter, Waxing
> gibbous, Full, Waning gibbous, Last quarter, Waning crescent
>
>
> ##############################################################################
>
> # This service acts as a filter, converting the unit system coming from
> # the hardware to a unit system in the database.
>
> [StdConvert]
>
> # The target_unit affects only the unit system in the database. Once
> # chosen it cannot be changed without converting the entire database.
> # Modification of target_unit after starting weewx will result in
> # corrupt data - the database will contain a mix of US and METRIC data.
> #
> # The value of target_unit does not affect the unit system for
> # reporting - reports can display US, Metric, or any combination of
> units.
> #
> # In most cases, target_unit should be left as the default: US
> #
> # In particular, those migrating from a standard wview installation
> # should use US since that is what the wview database contains.
>
> # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
> target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
>
>
> ##############################################################################
>
> # This section can adjust data using calibration expressions.
>
> [StdCalibrate]
>
> [[Corrections]]
> # For each type, an arbitrary calibration expression can be given.
> # It should be in the units defined in the StdConvert section.
> # Example:
> foo = foo + 0.2
>
>
> ##############################################################################
>
> # This section is for quality control checks. If units are not specified,
> # values must be in the units defined in the StdConvert section.
>
> [StdQC]
>
> [[MinMax]]
> barometer = 26, 32.5, inHg
> pressure = 24, 34.5, inHg
> outTemp = -40, 120, degree_F
> inTemp = 10, 120, degree_F
> outHumidity = 0, 100
> inHumidity = 0, 100
> windSpeed = 0, 120, mile_per_hour
> rain = 0, 10, inch
>
>
> ##############################################################################
>
> # This section controls the origin of derived values.
>
> [StdWXCalculate]
>
> [[Calculations]]
> # How to calculate derived quantities. Possible values are:
> # hardware - use the value provided by hardware
> # software - use the value calculated by weewx
> # prefer_hardware - use value provide by hardware if available,
> # otherwise use value calculated by weewx
>
> pressure = prefer_hardware
> altimeter = prefer_hardware
> appTemp = prefer_hardware
> barometer = prefer_hardware
> beaufort = prefer_hardware
> cloudbase = prefer_hardware
> dewpoint = prefer_hardware
> ET = prefer_hardware
> heatindex = prefer_hardware
> humidex = prefer_hardware
> inDewpoint = prefer_hardware
> maxSolarRad = prefer_hardware
> rainRate = prefer_hardware
> windchill = prefer_hardware
> windrun = prefer_hardware
>
>
> ##############################################################################
>
> # For hardware that supports it, this section controls how often the
> # onboard clock gets updated.
>
> [StdTimeSynch]
>
> # How often to check the weather station clock for drift (in seconds)
> clock_check = 14400
>
> # How much it can drift before we will correct it (in seconds)
> max_drift = 5
>
>
> ##############################################################################
>
> # This section is for configuring the archive service.
>
> [StdArchive]
>
> # If the station hardware supports data logging then the archive
> interval
> # will be downloaded from the station. Otherwise, specify it (in
> seconds).
> archive_interval = 300
>
> # If possible, new archive records are downloaded from the station
> # hardware. If the hardware does not support this, then new archive
> # records will be generated in software.
> # Set the following to "software" to force software record generation.
> record_generation = hardware
>
> # Whether to include LOOP data in hi/low statistics
> loop_hilo = True
>
> # The data binding used to save archive records
> data_binding = wx_binding
>
>
> ##############################################################################
>
> # This section binds a data store to a database.
>
> [DataBindings]
>
> [[wx_binding]]
> # The database must match one of the sections in [Databases].
> # This is likely to be the only option you would want to change.
> database = archive_sqlite
> # The name of the table within the database
> table_name = archive
> # The manager handles aggregation of data for historical summaries
> manager = weewx.manager.DaySummaryManager
> # The schema defines the structure of the database.
> # It is *only* used when the database is created.
> schema = schemas.wview_extended.schema
>
>
> ##############################################################################
>
> # This section defines various databases.
>
> [Databases]
>
> # A SQLite database is simply a single file
> [[archive_sqlite]]
> database_name = weewx.sdb
> database_type = SQLite
>
> # MySQL
> [[archive_mysql]]
> database_name = weewx
> database_type = MySQL
>
>
> ##############################################################################
>
> # This section defines defaults for the different types of databases.
>
> [DatabaseTypes]
>
> # Defaults for SQLite databases
> [[SQLite]]
> driver = weedb.sqlite
> # Directory in which the database files are located
> SQLITE_ROOT = %(WEEWX_ROOT)s/archive
>
> # Defaults for MySQL databases
> [[MySQL]]
> driver = weedb.mysql
> # The host where the database is located
> host = localhost
> # The user name for logging in to the host
> user = weewx
> # The password for the user name (quotes guard against parsing
> errors)
> password = weewx
>
>
> ##############################################################################
>
> # This section configures the internal weewx engine.
>
> [Engine]
>
> [[Services]]
> # This section specifies the services that should be run. They are
> # grouped by type, and the order of services within each group
> # determines the order in which the services will be run.
> prep_services = weewx.engine.StdTimeSynch
> data_services = weewx.extra_sensors_service.ExtraSensorsService,
> process_services = weewx.engine.StdConvert,
> weewx.engine.StdCalibrate, weewx.engine.StdQC,
> weewx.wxservices.StdWXCalculate
> archive_services = weewx.engine.StdArchive
> restful_services = weewx.restx.StdStationRegistry,
> weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>
> ----------------------------
> Any other files needed for review?
>
> Suggestions on where to go from here -
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/ed9310a5-e26b-41a1-aafb-a69acbe4dac2o%40googlegroups.com
> <https://groups.google.com/d/msgid/weewx-user/ed9310a5-e26b-41a1-aafb-a69acbe4dac2o%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/CAPq0zEDfefSpw2CTCCE%3DrcYUWFGfHDHSi0Uekzw4NZPLM9e04w%40mail.gmail.com.
