oops, image looks small inline.  Attaching it to this post.

On Wednesday, May 13, 2020 at 7:29:28 PM UTC-4, John Hill wrote:
>
> Hi,
> Finally got around to adding more temp/soil sensors to my setup (3.9.2, 
> gw1000, interceptor).  Everything went fine, except for some reason the 
> unit is missing from the last temp sensor i added (extraTemp8) and the last 
> soil sensor I added (soilMoist5):
>
> [image: Untitled.png]
>
>
>
> Those sensors are being read and mapped by interceptor correctly 
> (temperature_8 and soil_moisture_5):
>
> raw data: PASSKEY=XXXX&stationtype=GW1000B_V1.5.8&dateutc=2020-05-13+19:58
> :30&tempinf=77.9&humidityin=51&baromrelin=30.070&baromabsin=30.070&tempf=
> 86.7&humidity=41&winddir=96&windspeedmph=14.76&windgustmph=22.82&
> maxdailygust=26.17&solarradiation=228.73&uv=2&rainratein=0.000&eventrainin
> =0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.531&
> monthlyrainin=1.220&yearlyrainin=10.929&totalrainin=10.929&temp1f=77.54&
> humidity1=51&temp2f=78.44&humidity2=50&temp3f=77.54&humidity3=51&temp4f=
> 88.34&humidity4=38&temp5f=76.10&humidity5=58&temp6f=77.54&humidity6=50&
> temp7f=76.46&humidity7=52&temp8f=77.72&humidity8=50&soilmoisture1=26&
> soilmoisture2=42&soilmoisture3=38&soilmoisture4=43&soilmoisture5=38&
> wh68batt=1.52&wh40batt=1.6&wh26batt=0&batt1=0&batt2=0&batt3=0&batt4=0&
> batt5=0&batt6=0&batt7=0&batt8=0&soilbatt1=1.7&soilbatt2=1.7&soilbatt3=1.5&
> soilbatt4=1.6&soilbatt5=1.8&freq=915M&model=GW1000_Pro
>
> raw packet: {'temperature_2': 78.44, 'temperature_3': 77.54, 
> 'temperature_1': 77.54, 'temperature_6': 77.54, 'temperature_7': 76.46, 
> 'temperature_4': 88.34, 'temperature_5': 76.1, 'temperature_8': 77.72, 
> 'soil_battery_2': 1.7, 'humidity_7': 52.0, 'soil_battery_4': 1.6, 
> 'dateTime': 1589399910, 'humidity_1': 51.0, 'battery_8': 0.0, 'battery_7': 
> 0.0, 'battery_6': 0.0, 'battery_5': 0.0, 'battery_4': 0.0, 'battery_3': 
> 0.0, 'battery_2': 0.0, 'battery_1': 0.0, 'temperature_out': 86.7, 
> 'wind_dir': 96.0, 'rain_total': 10.929, 'humidity_in': 51.0, 'humidity_4': 
> 38.0, 'soil_battery_1': 1.7, 'humidity_6': 50.0, 'soil_battery_3': 1.5, 
> 'solar_radiation': 228.73, 'soil_battery_5': 1.8, 'humidity_2': 50.0, 
> 'humidity_3': 51.0, 'rain_rate': 0.0, 'humidity_8': 50.0, 'rain': 0.0, 
> 'pressure': 30.07, 'usUnits': 1, 'wind_speed': 14.76, 'temperature_in': 
> 77.9, 'wind_gust': 22.82, 'humidity_5': 58.0, 'humidity_out': 41.0, 'uv': 
> 2.0, 'wh26_battery': 0.0, 'soil_moisture_1': 26.0, 'soil_moisture_2': 42.0
> , 'soil_moisture_3': 38.0, 'soil_moisture_4': 43.0, 'soil_moisture_5': 
> 38.0}
>
> mapped packet: {'outHumidity': 41.0, 'extraHumid8': 50.0, 'soilMoist3': 
> 38.0, 'soilMoist2': 42.0, 'rainRate': 0.0, 'radiation': 228.73, 
> 'soilMoist1': 26.0, 'inTemp': 77.9, 'soilMoist4': 43.0, 'rain': 0.0, 
> 'extraHumid6': 50.0, 'pressure': 30.07, 'extraHumid4': 38.0, 'extraHumid5'
> : 58.0, 'extraHumid2': 50.0, 'extraHumid3': 51.0, 'extraTemp8': 77.72, 
> 'extraHumid1': 51.0, 'extraTemp6': 77.54, 'extraTemp7': 76.46, 
> 'extraTemp4': 88.34, 'extraTemp5': 76.1, 'extraTemp2': 78.44, 'extraTemp3'
> : 77.54, 'usUnits': 1, 'extraTemp1': 77.54, 'extraHumid7': 52.0, 'UV': 2.0
> , 'dateTime': 1589399910, 'windDir': 96.0, 'outTemp': 86.7, 'windSpeed': 
> 14.76, 'inHumidity': 51.0, 'windGust': 22.82}
>
> My current.inc shows extraTemp8 isn't referenced any differently than the 
> other extraTemps:
> #if $day.extraTemp7.has_data
>       <tr>
>         <td class="label">$obs.label.extraTemp7</td>
>         <td class="data">$current.extraTemp7</td>
>       </tr>
> #end if
> #if $day.extraTemp8.has_data
>       <tr>
>         <td class="label">$obs.label.extraTemp8</td>
>         <td class="data">$current.extraTemp8</td>
>       </tr>
> #end if
>
> Also tried rebuilding my DB, just in case, but values are still not 
> formatted correctly with units.
>
> Any ideas?
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/877f7d4a-abf3-48fc-92f8-257d9b29ad79%40googlegroups.com.

Reply via email to