OK, let me absorb this information a bit and see what I can figure out. On Sunday, February 9, 2020 at 4:56:30 PM UTC-8, gjr80 wrote: > > On Monday, 10 February 2020 10:35:37 UTC+10, Dan Blanchard wrote: >> >> My station labels it as 'Pressure inHg' which is currently 30.30 and >> matches others in the area. >> > > I presume you mean the station display. The use of 'Pressure' is > consistent with it being station pressure but it could mean anything, would > not be the first time weather station hardware manufacturers have been > vague, liberal with the truth or just wrong. > > So I am a bit confused between what you said about barometric pressure vs. >> raw pressure. >> > > Did you read the wiki article about the three different pressures that > WeeWX uses? Could you explain what it is that confuses you? > > >> Ultimately, is there a fix for me? Can I make some kind of adjustment? >> > > Not sure what you are trying to fix, if the issue is that you want > everything to display the same value then sure there are changes you can > make. Since you can't change what the station hardware displays you need to > change what WeeWX and WU displays. Changing what WeeWX displays is easy, as > I said its a simple change to a template. Changing what WU displays is more > complex and involves changing the WeeWX WU uploader to upload WeeWX field > pressure instead of field barometer. If you go down this path you need to > accept a few things. Firstly, your WU data will be inaccurate (it expects > barometric pressure and you will be sending it station pressure). Secondly, > your changes to the template will be safe but your changes to the WU > uploader will likely be overwritten each time you upgrade WeeWX. > > I am not familiar with the WS-2813 so do not know if there is any ability > to change what pressure it displays, I suspect there will not be a means > though. > > At the end of the day you might be displaying a different value to a lot > of other folks, doesn't make them right and you wrong though. > > Gary > > > > > > >> On Sunday, February 9, 2020 at 4:29:42 PM UTC-8, gjr80 wrote: >>> >>> Slightly, but still apples and oranges. By default WeeWX displays >>> barometric pressure so WeeWX and WU displaying the same 'pressure' is >>> expected behaviour. The 'pressure' displayed by WeeWX can be changed with a >>> simple change to a template, unfortunately what cannot be changed is what >>> WU expects and (usually) what your station hardware displays. >>> >>> Gary >>> >>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/c43f41d0-2280-4c62-b425-4ba19baa3f21%40googlegroups.com.
