First of all thank you for the support you are giving ;-) btw my station has wind speed with km/h, in fact i'm testing your commit and I have gusts and wind like tornadoes :) . Is it possible to keep the wind measurement in km / h? Meanwhile I started weewx directly and I'm waiting for a rainy event (watching the day I won't have to wait long) Il giorno venerdì 13 dicembre 2019 16:29:34 UTC+1, mwall ha scritto: > > > > On Friday, December 13, 2019 at 4:28:02 AM UTC-5, S1m0n3 wrote: >> >> I see same packet parsed 3 times, it's not normal right? >> > > this is not unusual. i do not know why, but rtl_433 often outputs the > same packet multiple times. there is logic in genLoopPackets to skip > duplicates, so although you see them in the output when you run weewx-sdr > directly, you should *not* see duplicates in the weewxd output. > > could you run weewx with debug=1 then post the log output? it should > report when duplicate packets appear, and when it rejects the duplicates. > > > >> And another "problem" is that some times the rain_total from station is >> reset (is' not problem only of my station but other guys with this station >> get a reset, maybe low battery, usually around 100mm it is reset). Before >> using weewx I've used another "software" developed by an Italian that used >> rtl_433 without any problem, the only thing is that the software could not >> keep track of the reset of rain_total and reported the rain in negative >> when this happened. >> > > well, if the hardware is emitting garbage then there is nothing the > weewx-sdr driver or weewx can do about it. > > > >> And how you can see i receive FOWHx080Packet and FOWH3080Packet ... >> FOWHx080Packet for the classic weather data (temp, hum, rain, wind), >> FOWH3080Packet for UV Packet. >> > > i was mistaken about the different packet types. there are two different > packet types from one rtl_433 setting - the "-R 32" option. i thought > there could only be one. thank you for correcting me. > > > >> usUnit is 16 and rain_total is in millimeters (rain sensor snaps every >> 0.3mm). >> > > your unit system is METRIC, so the values you see for rain in LOOP and REC > is measured in cm, not mm. that means that weewx is seeing 0.3 cm (3 mm, > not 0.3 mm) for each bucket tip. > > so it looks like the FOWHx080Packet should be METRICWX not METRIC. > > i have modified the weewx-sdr driver as of commit 662ad60 > > note that will also affect wind speed - using METRICWX in the 1080/3080 > packets means wind speed should be reported in m/s, not kph. could you > verify the wind speed from your station? (you will have to measure fairly > high wind speeds to confirm - at low wind speeds the differences do not > show up clearly) > >
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/ea95bda2-ad27-4b9f-bca5-6a11b29586ed%40googlegroups.com.
