I uninstalled and reinstalled weewx, along with interceptor, crt and
HP1000. Here's the section in the weewx.conf file with comments removed.
[HP1000]
ip_address_mask = "192.168.0.255"
retry_count = 5
socket_timeout = 5
loop_delay = 15
max_retry = 3
retry_wait = 5
driver = user.HP1000
The section from user.log: The ws-1001 is at static IP addr 192.168.0.197.
Pinging that addr shows something is there.
Jul 31 12:01:02 raspberrypi weewx[24848]: engine: Using configuration file
/etc/weewx/weewx.conf
Jul 31 12:01:02 raspberrypi weewx[24848]: engine: Loading station type
HP1000 (user.HP1000)
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: HP1000 Starting
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Using user-defined
broadcast mask - 192.168.0.255
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Address Mask =
192.168.0.255
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Retry count = 5.000000
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Socket timeout = 5.000000
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Loop delay = 15.000000
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Retry Wait = 5.000000
Jul 31 12:01:02 raspberrypi weewx[24848]: HP1000: Max Retry = 3.000000
Jul 31 12:01:02 raspberrypi weewx[24848]: engine: StdConvert target unit is
0x1
Later I get this in the user.log file:
Jul 31 12:01:27 raspberrypi weewx[24848]: HP1000: Timed out too many times
That repeats. what to fix now? Thanks
On Monday, July 29, 2019 at 10:47:49 PM UTC-4, Susan Mackay wrote:
>
> In the weewx.conf file, you can uncomment the 'ip_address_mask' line and
> set it to whatever is the correct address mask for your network.
> The HP1000 code must be running on a computer that is on the same network
> sub-net as the weather console. Setting the 'ip_address_mask' overrides the
> automatic selection of the computers IP address as the default.
> Failing that,if you know Python, then go into the HP1000.py code and
> remove the stat of the 'connectToWeatherStation' function and set
> 'self.ws_socket' to be an open connection to the remote IP address.
> Susan
>
> On Tuesday, July 30, 2019 at 4:55:44 AM UTC+10, Bill Volz wrote:
>>
>> I had this working for 2 years but it stopped Saturday. I got it working
>> 2 years ago and don't quite recall what I did. I think I used EasyWeatherIP
>> to change web page in the setup page from "www.wunderground.com' to
>> 'www.***.com". Now when I try to change it with EWIP, it doesn't make the
>> change - it has made other changes. Not sure if there is a trick. I've
>> tried to install HP1001 but it times out and can't find the WS-1001. Is
>> there a way to tell HP1001 what the IP address of the WS_1001 is - I have
>> it on a static address using the MAC address on my router. I tried to
>> install ObserverIP and that's not working either. Current WS-1001 firmware
>> is 2.4.3 and would prefer to not have to upgrade that since it's a pain in
>> a$$ to get everything update again.
>>
>> Any hints on how to get it connected again would be appreciated. Thanks
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/weewx-user/9169a730-96fc-4cb7-a213-fa0a8f0f5f9c%40googlegroups.com.
