On Sun, Jun 2, 2019, 8:35 AM [email protected] <[email protected]> wrote:
> Hi there. I'm a newbie to WeeWx. I have a Davis Instruments Vantage Pro2. > > Firstly, let me say, that it seems to be working perfectly. However ... > > Since this is my first time using it, I decided to try "Installation using > setup.py." This says to "Download the source archive weewx-X.Y.Z.tar.gz > from weewx.com/downloads." I did that and found X.Y.Z == 3.9.1. I am > running Ubuntu 18.04, where the default version of python is 2.7. Some > additional python libraries did need to be downloaded/installed. > Thereafter, WeeWx build and install worked fine. So far, so good. > > However, "sudo ./bin/weewxd weewx.conf" produced a Dictionary dump for > LOOP every two seconds on the terminal, and for another dictionary less > frequently. I could fix this by doing "sudo ./bin/weewxd weewx.conf > >/dev/null 2>&1 &" instead. However, I don't think I should have to. I > looked at drivers/vantage.py and I couldn't see where it was coming from, > so I assume it is coming from the caller. Perhaps someone on this list can > help me track it back? > Run it as a daemon, the instructions are on the same page as the installation instructions: http://www.weewx.com/docs/setup.htm Jardi. > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAETA7dS8Zj824-aTR-e3COMg-YenSVNeySH7Gd7MnGFGyn9T%2Bw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
