Sounds like a plan. Let me know once you have done it. Interceptor should receive only the wu messages, then it should not have any issue.
Gabor Joe Santas <[email protected]> ezt írta (időpont: 2019. máj. 21., Ke 17:41): > From what i have read they specify just the tcp to port 80 which i already > have in place. What i will do is deactivate the upload features in the > weatherstation its self and see if it makes a difference and leave the > rules i currently have in place and see if this sorts it. > Once this is done i will configure weewx config file to push the data up > to wunderground and weathercloud any any other services i use. > > Regards > > On Wednesday, May 22, 2019 at 1:35:11 AM UTC+10, Gábor Szabados wrote: >> >> Read about how you can redirect only the traffic to WU servers to your >> weewx server then you will be ok. >> >> I've seen some Merlin router firmware descriptions how it can be done. Or >> DD-WRT descriptions are around the net too. >> >> Gabor >> >> Joe Santas <[email protected]> ezt írta (időpont: 2019. máj. 21., Ke >> 16:22): >> >>> You may be onto something. So i will have to turn off the non wu >>> servers on the device its self. Im unable to do this as i am at work but i >>> can reconfigure my router remotely to route the correct traffic. I can try >>> this from work. Which protocol should i leave active? At the moment i am >>> forwarding all tcp traffic to my weewx server from the weather station. >>> >>> Regards >>> >>> On Wednesday, May 22, 2019 at 12:13:36 AM UTC+10, Gábor Szabados wrote: >>>> >>>> I can see more issues there, because I faced a similar one before. >>>> >>>> One of your issues, maybe the main one, that your weather station is >>>> sending reports to multiple servers and all of them ia redirected to your >>>> weewx. Interceptor tries to parse all the messages and faces a mixed state >>>> with yearlyrainin and dailyrainin and some rounding issues. >>>> >>>> First try to turn off the reporting to the non-wu servers. Or set your >>>> router to forward only the wu request to your weewx. Then the interceptor >>>> will recieve and parse only one kind of messages. >>>> >>>> Gabor >>>> >>>> Joe Santas <[email protected]> ezt írta (időpont: 2019. máj. 21., Ke >>>> 15:52): >>>> >>>>> wraparound detected in this log. >>>>> After clearing the database rainfall graph has started to populate >>>>> once again even though no rain lol. >>>>> >>>>> >>>>> >>>>> >>>>> On Tuesday, May 21, 2019 at 5:12:03 PM UTC+10, Gábor Szabados wrote: >>>>>> >>>>>> Hi Joe, >>>>>> >>>>>> Could you try to look for messages in the log, like interceptor: >>>>>> MainThread: rain counter wraparound detected: >>>>>> >>>>>> I can see a rounding issue (maybe) at the yearly rain is once 2.248 >>>>>> the then 2.25, when no weekly rain change. >>>>>> >>>>>> May 21 02:53:17 UBUNTUMATE-1000H weewx[7192]: interceptor: >>>>>> MainThread: raw data: >>>>>> PASSKEY=********************&stationtype=EasyWeatherV1.3.2&dateutc=2019-05-20+16:53:05&tempinf=65.8&humidityin=60&baromrelin=30.14&baromabsin=29.54&tempf=55.4&humidity=77&winddir=16&windspeedmph=2.9&windspdmph_avg10m=0.0&windgustmph=3.4&maxdailygust=8.1&rainratein=0.000&eventrainin=0.000&hourlyrainin=0.000&dailyrainin=0.000&weeklyrainin=0.000&monthlyrainin=1.346&yearlyrainin=2.248&solarradiation=0.00&uv=0 >>>>>> >>>>>> May 21 02:53:22 UBUNTUMATE-1000H weewx[7192]: interceptor: >>>>>> ServerThread: GET: >>>>>> ID=*********&PASSWORD=****&indoortempf=65.8&tempf=55.4&dewptf=48.4&windchillf=55.4&indoorhumidity=60&humidity=77&windspeedmph=2.9&windgustmph=3.4&winddir=16&absbaromin=29.54&baromin=30.14&rainin=0.00&dailyrainin=0.00&weeklyrainin=0.00&monthlyrainin=1.35&yearlyrainin=2.25&solarradiation=0.00&UV=0&dateutc=2019-05-20%2016:53:21&softwaretype=EasyWeatherV1.3.2&action=updateraw&realtime=1&rtfreq=5 >>>>>> >>>>>> Look for wraparound events and check on your console too what is your >>>>>> yearly value. Try to find places where the yearlyrainin changes and where >>>>>> it calculates rain from the change then I can try to find you the logic >>>>>> what goes wrong. Look for dateutc values too, is it incremental or >>>>>> changes >>>>>> back time to time when wraparound happens, if happens. >>>>>> >>>>>> Best Regards, >>>>>> >>>>>> Gabor >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "weewx-user" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/d/msgid/weewx-user/f4434e12-7ed4-4a60-bc6c-42ff8de0d5ee%40googlegroups.com >>>>> <https://groups.google.com/d/msgid/weewx-user/f4434e12-7ed4-4a60-bc6c-42ff8de0d5ee%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>> . >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/lg4W_4qHTaQ/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/weewx-user/30272d74-fedd-46a6-9a0f-ba66112df697%40googlegroups.com >>> <https://groups.google.com/d/msgid/weewx-user/30272d74-fedd-46a6-9a0f-ba66112df697%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/weewx-user/a5b531bf-8bd0-4ede-8ae4-6d5d84f34a3a%40googlegroups.com > <https://groups.google.com/d/msgid/weewx-user/a5b531bf-8bd0-4ede-8ae4-6d5d84f34a3a%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/CAEx3znKn9BHRi1c1nHjwK6xfiHA6b%2BrWseT8ypi15uOMhjmg9Q%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
