Yes, this was in commit 6e7f3aac <https://github.com/weewx/weewx/commit/6e7f3aac1b2926cacfa63229db2dbbd55f3f2cab>, which is now part of v3.9.1.
-tk On Sat, Apr 6, 2019 at 5:11 PM <[email protected]> wrote: > Hi all > > Just upgraded my installation as above. The hardware is WeatherDuino > emulating the Davis comms protocol. On a previous occasion I had an issue > which I think was similar to the errors below and was asked to use an > updated engine.py file - which fixed the problem. After the upgrade I had > to once again copy over the "new" engine.py to sort out this error. I'm not > sure if the fix I was supplied was supposed to be rolled through to the > 3.9.1 upgrade? Log below of the error. > > Cheers > Colin > > Apr 7 11:57:16 raspberrypi systemd[1]: Starting LSB: weewx weather > system... > > Apr 7 11:57:17 raspberrypi weewx[21102]: engine: Initializing weewx > version 3.9.1 > > Apr 7 11:57:17 raspberrypi weewx[21102]: engine: Using Python 2.7.13 > (default, Sep 26 2018, 18:42:22) #012[GCC 6.3.0 20170516] > > Apr 7 11:57:17 raspberrypi weewx[21102]: engine: Platform > Linux-4.14.71-v7+-armv7l-with-debian-9.4 > > Apr 7 11:57:17 raspberrypi weewx[21102]: engine: Locale is 'en_NZ.UTF-8' > > Apr 7 11:57:17 raspberrypi weewx[21102]: engine: pid file is > /var/run/weewx.pid > > Apr 7 11:57:17 raspberrypi weewx[21090]: Starting weewx weather system: > weewx. > > Apr 7 11:57:17 raspberrypi systemd[1]: Started LSB: weewx weather system. > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Using configuration > file /etc/weewx/weewx.conf > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Loading station type > Vantage (weewx.drivers.vantage) > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: StdConvert target unit > is 0x10 > > Apr 7 11:57:17 raspberrypi weewx[21106]: wxcalculate: The following > values will be calculated: barometer=prefer_hardware, > windchill=prefer_hardware, dewpoint=prefer_hardware, appTemp=software, > rainRate=prefer_hardware, windrun=prefer_hardware, > heatindex=prefer_hardware, maxSolarRad=prefer_hardware, > humidex=prefer_hardware, pressure=prefer_hardware, > inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware, > cloudbase=prefer_hardware > > Apr 7 11:57:17 raspberrypi weewx[21106]: wxcalculate: The following > algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Archive will use data > binding wx_binding > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Record generation will > be attempted in 'software' > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Using archive interval > of 300 seconds (software record generation) > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Using binding > 'wx_binding' to database 'weewx.sdb' > > Apr 7 11:57:17 raspberrypi weewx[21106]: manager: Starting backfill of > daily summaries > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: StationRegistry: Station > will be registered. > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: Wunderground: Posting > not enabled. > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: PWSweather: Posting not > enabled. > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: CWOP: Data for station > ZL2ARL will be posted > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: WOW: Posting not enabled. > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: AWEKAS: Posting not > enabled. > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: MQTT: service version is > 0.18rc1 > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: MQTT: binding to loop > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: MQTT: topic is > weather/41south > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: MQTT: desired unit > system is METRIC > > Apr 7 11:57:17 raspberrypi weewx[21106]: restx: MQTT: data will be > uploaded to mqtt://192.168.20.121:1883/ > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Starting up weewx > version 3.9.1 > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Clock error is -1.44 > seconds (positive is fast) > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: No <ACK> received from > console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: DMPAFT try #1; error: > No <ACK> received from Vantage console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: No <ACK> received from > console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: DMPAFT try #2; error: > No <ACK> received from Vantage console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: No <ACK> received from > console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: DMPAFT try #3; error: > No <ACK> received from Vantage console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: No <ACK> received from > console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: DMPAFT try #4; error: > No <ACK> received from Vantage console > > Apr 7 11:57:17 raspberrypi weewx[21106]: vantage: DMPAFT max tries (4) > exceeded. > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Main loop exiting. > Shutting engine down. > > Apr 7 11:57:17 raspberrypi weewx[21106]: engine: Caught WeeWxIOError: > Max tries exceeded while getting archive data. > > Apr 7 11:57:17 raspberrypi weewx[21106]: **** Waiting 60 seconds > then retrying... > > Apr 7 11:58:02 raspberrypi systemd[1]: Stopping LSB: weewx weather > system... > > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
