I am looking at the weewx hardware guide page and most interfaces are listed as USB, is that how must consoles are connected to raspberry pi for weewx?
The 1900 does not have access or usb , as I was going to use sdr to get the signal as suggested in the posts first answer from mwall. the ws-2902a station has usb, but is not on the hardware list. it is the same instruments as the 1900 but with wifi and usb i believe. On Sunday, March 3, 2019 at 11:15:21 AM UTC-5, rich T wrote: > > Typo on my part...915 MHz for the WS-1900. Both other sensors are 433 > MHz . Does the WS-1900 console have USB Port or are you referring about > the USB hub? As for suggesting another WS, it depends on your budget. I > have a Davis Vantage Pro 2 and Acurite 5 +1 sensor with various consoles. > > On Sunday, March 3, 2019 at 10:43:39 AM UTC-5, Ashley Gibbon wrote: >> >> Did you mean 915 MHz for the WS-1900, that is what I see, but eben if it >> is that is not 933 MHz right? >> >> Can weewx do both USB and rtl_433? >> >> Would you suggest another weather station, sensor combo to add pool >> temperature? >> >> This station has pool temperature: http://www.agualindapool.com/weewx/ >> >> http://www.agualindapool.com/weewx/ >> >> >> >> >> On Saturday, March 2, 2019 at 10:08:40 PM UTC-5, rich T wrote: >>> >>> Ashley >>> >>> Looks like the devices on order use 815 MHz (WS-1900) and 433 MHz (007PF >>> / F007TP) as their transmit frequencies. I guess you are using a SDR >>> and RTL_433 for decoding. You can configure RTL_433 to hop between >>> those frequencies, but how much data are you willing to lose when hopping >>> between frequencies. You might be able to use two SDR's, but don't know >>> the best way to interface with weewx. Maybe someone else will have a >>> better insight on this. But if two SDR's is a possible solution, would use >>> a powered USB hub something like this: >>> https://www.amazon.com/AmazonBasics-4-Port-USB-2-0-Ultra-Mini/dp/B00DQFGH80?th=1 >>> to >>> interface the SDRs to the RPI. Just need to change the SDRs serial >>> numbers, which is not hard to do. >>> >>> Don't know if RTL_433 decode those devices as of right now, might want >>> to do ask or search here: >>> https://groups.google.com/forum/#!forum/rtl_433 or >>> https://github.com/merbanan/rtl_433. >>> >>> Thanks >>> Rich >>> >>> On Saturday, March 2, 2019 at 5:28:17 PM UTC-5, Ashley Gibbon wrote: >>> >>>> Here is where I am so far. >>>> >>>> I have a RPI running with weewx on it. >>>> >>>> I had an old LaCrosse tempereure sensor already. I walked thriough thwe >>>> recipe and have weeex runninf an displaying ourdoor temperature. >>>> >>>> Fantastic. >>>> >>>> I have on order >>>> >>>> the ws-1900 Weather Station >>>> 007PF 8-Channel Wireless Pool and Spa Remote Sensor >>>> F007TP 8-Channel Wireless Thermometer with Wet Temperature Probe >>>> >>>> Hope these will be as easy to set up, >>>> >>>> I cannot find much direction on them though. >>>> >>>> Thanks >>>> >>>> Ashley >>>> >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
