Did you try "rtl_eeprom" to change the dongle's serial number. On Monday, February 25, 2019 at 6:40:42 PM UTC-5, [email protected] wrote: > > Thanks Ruben, > > I will give a try and let you know how it goes. > > On Monday, February 25, 2019 at 9:43:24 PM UTC, Ruben Navarro Huedo wrote: >> >> have a look at this. >> >> https://www.rtl-sdr.com/forum/viewtopic.php?t=2073 >> >> You need set a seral in each rtlsdr. >> After you must use that serial with rtl_433 >> >> El lunes, 25 de febrero de 2019, 18:59:15 (UTC+1), [email protected] >> escribió: >>> >>> I am using two identical SDR usb dongles to receive streams from two >>> different frequencies, namely 433Mhz and 868Mhz. >>> >>> I have set up WeeWX to run two weather stations as per >>> https://github.com/weewx/weewx/wiki/weewx-multi and all is running OK. >>> >>> The problem I have is to how to allocate one dongle to each of the two >>> configurations. >>> >>> lsusb lists them as: - >>> >>> Bus 001 Device 002: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 >>> DVB-T >>> Bus 001 Device 003: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 >>> DVB-T >>> >>> Thank you in advance for any guidance. >>> >>> Ian >>> >>> >>> >>>
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
