The "establishing connectivity" instructions don't mention it, but be sure to hit <enter> a few times before typing TEST.
On Mon, Jan 28, 2019 at 4:11 PM monmul <[email protected]> wrote: > Tried both screen and minicom.....no TEST echo back....so must be > hardware....but totally flummoxed as all hardware (apart from Rpi) has been > replaced.....have another pi on order....but in the meantime I guess I will > go back to scratch and start all over again....at least it has worked > before with this set up....maybe something has become corrupted! > > > On Tuesday, 29 January 2019 12:11:06 UTC+13, Thomas Keffer wrote: >> >> Try to communicate directly with the Envoy, without going through WeeWX. >> For how to do this, see the section *Establishing connectivity >> <http://weewx.com/docs/usersguide.htm#Establishing_connectivity>* in the >> User's Guide. If you are unable to do that, then this is definitely a >> hardware problem. >> >> -tk >> >> On Mon, Jan 28, 2019 at 2:41 PM dunbrokin <[email protected]> wrote: >> >>> Thanks, but no I don't ....I use VNC. >>> >>> On Tue, Jan 29, 2019 at 11:35 AM <[email protected]> wrote: >>> >>>> Just a quick question. Do you have a monitor (like the Pi 7 in touch >>>> screen) attached that is running off the same power supply as the Pi? I had >>>> a setup like that which used a splitter to power both the monitor and Pi >>>> from one power pack. My setup kept complaining of undervolting until I >>>> removed the splitter and plugged the monitor and pi each into their own >>>> power supply. >>>> >>>> phil >>>> >>>> On Monday, January 28, 2019 at 3:41:15 PM UTC-5, monmul wrote: >>>>> >>>>> I have replaced the power unit, taken it off the power strip an >>>>> plugged both it and the Vanatage into the mains. I have replaced the >>>>> powered hub (official RPi one...with another official RPi one) ...and here >>>>> is what I am getting.......very dispirited! I have another Davis Weather >>>>> Envoy which I will soon substitute for the one I am currently >>>>> using.....but >>>>> nothing seems to make a difference and the Envoy just will not wake up! >>>>> >>>>> pi@raspberrypi:~ $ sudo tail -f /var/log/syslog >>>>> Jan 29 09:14:05 raspberrypi udisksd[766]: Mounted /dev/sda1 at >>>>> /media/pi/e78ab10a-51d2-40f0-aa6d-5f2d2b0f27b7 on behalf of uid 1000 >>>>> Jan 29 09:14:05 raspberrypi vncserver-x11[453,root]: SPrintConnMgr: >>>>> Failed to add printer: server-error-service-unavailable >>>>> Jan 29 09:14:07 raspberrypi dhcpcd[338]: wlan0: no IPv6 Routers >>>>> available >>>>> Jan 29 09:14:10 raspberrypi kernel: [ 22.871754] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:14:12 raspberrypi weewx[506]: vantage: Unable to wake up >>>>> console >>>>> Jan 29 09:14:12 raspberrypi weewx[506]: import of driver failed: >>>>> Unable to wake up Vantage console (<class 'weewx.WakeupError'>) >>>>> Jan 29 09:14:12 raspberrypi weewx[506]: engine: Unable to load driver: >>>>> Unable to wake up Vantage console >>>>> Jan 29 09:14:12 raspberrypi weewx[506]: **** Exiting... >>>>> Jan 29 09:14:27 raspberrypi kernel: [ 39.511958] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:14:31 raspberrypi kernel: [ 43.671921] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.239.8.22 >>>>> Jan 29 09:15:00 raspberrypi ntpd[467]: Soliciting pool server >>>>> 202.46.185.18 >>>>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>>>> 203.99.128.48 >>>>> Jan 29 09:15:01 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.106.66.123 >>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.242.68.69 >>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.106.65.219 >>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.242.70.5 >>>>> Jan 29 09:15:02 raspberrypi ntpd[467]: Soliciting pool server >>>>> 122.252.188.99 >>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>> 130.217.226.51 >>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>> 103.242.68.68 >>>>> Jan 29 09:15:03 raspberrypi ntpd[467]: Soliciting pool server >>>>> 203.99.128.34 >>>>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>>>> 202.46.177.18 >>>>> Jan 29 09:15:04 raspberrypi ntpd[467]: Soliciting pool server >>>>> 2407:f100:0:4::3 >>>>> Jan 29 09:15:06 raspberrypi ntpd[467]: Soliciting pool server >>>>> 202.46.178.18 >>>>> Jan 29 09:17:41 raspberrypi systemd[584]: Time has been changed >>>>> Jan 29 09:17:41 raspberrypi systemd[1]: Time has been changed >>>>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily.timer: Adding 9h >>>>> 28min 39.184756s random time. >>>>> Jan 29 09:17:41 raspberrypi systemd[1]: apt-daily-upgrade.timer: >>>>> Adding 27min 17.961005s random time. >>>>> Jan 29 09:18:28 raspberrypi kernel: [ 126.872661] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:18:34 raspberrypi kernel: [ 133.112736] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:18:34 raspberrypi CRON[1276]: (root) CMD ( cd / && >>>>> run-parts --report /etc/cron.hourly) >>>>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155297] >>>>> rpi_firmware_get_throttled: 2 callbacks suppressed >>>>> Jan 29 09:22:29 raspberrypi kernel: [ 368.155304] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315315] >>>>> rpi_firmware_get_throttled: 2 callbacks suppressed >>>>> Jan 29 09:22:33 raspberrypi kernel: [ 372.315322] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:24:27 raspberrypi kernel: [ 486.716533] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:24:34 raspberrypi kernel: [ 492.956607] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:26:28 raspberrypi kernel: [ 607.357755] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:26:32 raspberrypi kernel: [ 611.517793] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:26:45 raspberrypi ntpd[467]: 203.99.128.34 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:30:13 raspberrypi ntpd[467]: 103.239.8.22 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:30:45 raspberrypi ntpd[467]: 203.99.128.48 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:31:18 raspberrypi ntpd[467]: 122.252.188.99 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:31:23 raspberrypi systemd[1]: Starting Cleanup of Temporary >>>>> Directories... >>>>> Jan 29 09:31:23 raspberrypi systemd[1]: Started Cleanup of Temporary >>>>> Directories. >>>>> Jan 29 09:32:22 raspberrypi ntpd[467]: 130.217.226.51 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:32:59 raspberrypi kernel: [ 998.401865] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:33:03 raspberrypi kernel: [ 1002.561870] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:33:05 raspberrypi kernel: [ 1004.643095] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:33:12 raspberrypi kernel: [ 1010.882010] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:33:22 raspberrypi kernel: [ 1021.282184] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:33:34 raspberrypi kernel: [ 1033.762240] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:34:42 raspberrypi ntpd[467]: 103.106.66.123 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:35:16 raspberrypi ntpd[467]: 103.106.65.219 local addr >>>>> 10.1.1.7 -> <null> >>>>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645409] >>>>> rpi_firmware_get_throttled: 12 callbacks suppressed >>>>> Jan 29 09:38:17 raspberrypi kernel: [ 1316.645416] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965452] >>>>> rpi_firmware_get_throttled: 12 callbacks suppressed >>>>> Jan 29 09:38:26 raspberrypi kernel: [ 1324.965457] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:38:28 raspberrypi kernel: [ 1327.045547] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:38:32 raspberrypi kernel: [ 1331.205544] Voltage normalised >>>>> (0x00000000) >>>>> Jan 29 09:38:36 raspberrypi kernel: [ 1335.365722] Under-voltage >>>>> detected! (0x00050005) >>>>> Jan 29 09:38:55 raspberrypi kernel: [ 1354.085857] Voltage normalised >>>>> (0x00000000) >>>>> >>>>> >>>>> On Tuesday, 29 January 2019 08:51:01 UTC+13, vince wrote: >>>>>> >>>>>> On Monday, January 28, 2019 at 11:34:08 AM UTC-8, monmul wrote: >>>>>>> >>>>>>> I do have a spare official power supply, so I will swap out that and >>>>>>> test. ... I have a Pi3B+ on the way >>>>>>> >>>>>> >>>>>> Reminder, the pi3b+ need 'more' power and runs a little hotter than >>>>>> the others, so definitely be certain you have a quality power supply. >>>>>> >>>>>> I have had great luck with >>>>>> https://www.amazon.com/CanaKit-Raspberry-Power-Supply-Listed/dp/B07BC6WH7V >>>>>> just as one example. Also like the nice on/off switch dongle that came >>>>>> with it. >>>>>> >>>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "weewx-user" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "weewx-user" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
