..........and now we also need get_float instead of get_int > On Jan 3, 2019, at 12:35 AM, mwall <[email protected]> wrote: > >> On Thursday, January 3, 2019 at 1:06:53 AM UTC-5, Charlie Thompson wrote: >> OK..here is what I get from the command you suggested below: >> >> pi@raspberrypi:/etc/weewx $ sudo PYTHONPATH=/usr/share/weewx python >> /usr/share/weewx/user/sdr.py --cmd="rtl_433 -M -UTC -F json -G" >> out: ['{"time" : "2019-01-03 00:01:50", "model" : "Acurite 5n1 sensor", >> "sensor_id" : 3431, "channel" : "A", "sequence_num" : 0, "battery" : "OK", >> "message_type" : 49, "wind_speed_mph" : 0.000, "wind_dir_deg" : 337.500, >> "rain_inch" : 3.210}\n', '{"time" : "2019-01-03 00:01:50", "model" : >> "Acurite 5n1 sensor", "sensor_id" : 3431, "channel" : "A", "sequence_num" : >> 1, "battery" : "OK", "message_type" : 49, "wind_speed_mph" : 0.000, >> "wind_dir_deg" : 337.500, "rain_inch" : 3.210}\n', '{"time" : "2019-01-03 >> 00:01:50", "model" : "Acurite 5n1 sensor", "sensor_id" : 3431, "channel" : >> "A", "sequence_num" : 2, "battery" : "OK", "message_type" : 49, >> "wind_speed_mph" : 0.000, "wind_dir_deg" : 337.500, "rain_inch" : 3.210}\n'] >> parsed: {'rain_counter.0D67.Acurite5n1Packet': None, >> 'status.0D67.Acurite5n1Packet': None, 'dateTime': 1546473710, >> 'channel.0D67.Acurite5n1Packet': u'A', 'battery.0D67.Acurite5n1Packet': 0, >> 'wind_dir.0D67.Acurite5n1Packet': 337.5, 'wind_speed.0D67.Acurite5n1Packet': >> 0.0, 'usUnits': 1} > > there is the problem. your version of rtl_433 is reporting 'rain_inch', but > weewx-sdr 0.49 is expecting 'rain_counter_raw'. so you get nothing. > > what version of rtl_433 are you running? what version of weewx-sdr are you > running? > > is 'rain_inch' a counter or a delta? if it is a counter, you could try > modifying sdr.py from this: > > if msg_type == 49: # 0x31 > > pkt['wind_speed'] = Packet.get_float(obj, 'wind_speed_mph') > pkt['wind_dir'] = Packet.get_float(obj, 'wind_dir_deg') > pkt['rain_counter'] = Packet.get_int(obj, 'raincounter_raw') > elif msg_type == 56: # 0x38 > > pkt['wind_speed'] = Packet.get_float(obj, 'wind_speed_mph') > pkt['temperature'] = Packet.get_float(obj, 'temperature_F') > pkt['humidity'] = Packet.get_float(obj, 'humidity') > # put some units on the rain total - each tip is 0.01 inch > > if 'rain_counter' in pkt and pkt['rain_counter'] is not None: > pkt['rain_total'] = pkt['rain_counter'] * 0.01 # inch > > > to this: > > if msg_type == 49: # 0x31 > > pkt['wind_speed'] = Packet.get_float(obj, 'wind_speed_mph') > pkt['wind_dir'] = Packet.get_float(obj, 'wind_dir_deg') > pkt['rain_counter'] = Packet.get_int(obj, 'rain_inch') > elif msg_type == 56: # 0x38 > > pkt['wind_speed'] = Packet.get_float(obj, 'wind_speed_mph') > pkt['temperature'] = Packet.get_float(obj, 'temperature_F') > pkt['humidity'] = Packet.get_float(obj, 'humidity') > # put some units on the rain total - each tip is 0.01 inch > > if 'rain_counter' in pkt and pkt['rain_counter'] is not None: > pkt['rain_total'] = pkt['rain_counter'] > > trying to make weewx-sdr match every variation in output from every > incremental version of rtl_433 is whack-a-mole. > > m > -- > You received this message because you are subscribed to the Google Groups > "weewx-user" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
