On the PI running weewx
# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.4 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 2001:470:1f00:3480::2 prefixlen 64 scopeid 0x0<global>
inet6 fe80::ba27:ebff:febb:1a44 prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:bb:1a:44 txqueuelen 1000 (Ethernet)
RX packets 66790 bytes 29042616 (27.6 MiB)
RX errors 0 dropped 1378 overruns 0 frame 0
TX packets 21027 bytes 4829399 (4.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 8060 bytes 475705 (464.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 8060 bytes 475705 (464.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
On the PI running RaspAP
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.36 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::abf0:3ba2:3065:d02e prefixlen 64 scopeid 0x20<link>
inet6 2602:3f:e686:a600:bb58:3afe:8b5f:1567 prefixlen 64 scopeid
0x0<global>
inet6 fd00::f2f1:5e67:5f6a:1cee prefixlen 64 scopeid 0x0<global>
inet6 2602:3f:e686:a600:f18d:81e3:8118:214c prefixlen 64 scopeid
0x0<global>
inet6 fd00::fff:43f6:90d4:c8d8 prefixlen 64 scopeid 0x0<global>
ether b8:27:eb:21:f1:98 txqueuelen 1000 (Ethernet)
RX packets 39861 bytes 20878633 (19.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3634 bytes 2689800 (2.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 93 bytes 179941 (175.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 93 bytes 179941 (175.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.3.141.1 netmask 255.255.255.0 broadcast 10.3.141.255
inet6 fe80::e7af:2847:23b3:c7c8 prefixlen 64 scopeid 0x20<link>
ether 32:9c:a0:48:75:29 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 60 bytes 8395 (8.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
On Wednesday, January 2, 2019 at 4:58:29 AM UTC-8, G Hammer wrote:
>
> ifconfig command
> See what you have both for a name of the interface and the IP assigned to
> it.
>
> On Wed, Jan 2, 2019 at 7:55 AM Scott Grayban <[email protected]
> <javascript:>> wrote:
>
>> I got it....... Now I got a new problem
>>
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: driver
>> version is 0.45
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: device
>> type: observer
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: sensor
>> map: None
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: mode is
>> sniff
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: sniff
>> iface=wlan0 promiscuous=0
>> Jan 2 04:52:57 raspberrypi weewx[9586]: interceptor: MainThread: sniff
>> filter 'src 10.3.141.62 and dst port 80'
>> Jan 2 04:52:57 raspberrypi weewx[9586]: import of driver failed: wlan0:
>> That device is not up (<type 'exceptions.Exception'>)
>> Jan 2 04:52:57 raspberrypi weewx[9586]: engine: Unable to load driver:
>> wlan0: That device is not up
>>
>> I guess the pi that is running weewx can't connect to 10.3.141.62 - the
>> RaspAP is running on a different PI
>> On Wednesday, January 2, 2019 at 4:49:43 AM UTC-8, G Hammer wrote:
>>>
>>> Touch Wind and Alarm and keep touching them until it beeps and flashes
>>> M-B
>>>
>>> On Wed, Jan 2, 2019 at 7:47 AM Scott Grayban <[email protected]> wrote:
>>>
>>>> I did that but M-B never showed. All I see is M-A and there is nothing
>>>> I can find to get that to M-B
>>>>
>>>> On Wednesday, January 2, 2019 at 4:25:53 AM UTC-8, WILWetter25 wrote:
>>>>>
>>>>> 1. Connect to the New Network with your Mobile Phone.
>>>>> 2. Press Wind and Alarm -> the WiFi Symbol should start flash.
>>>>> 3. Open Ambient Tool
>>>>> -> Add Device -> Next -> Next -> Add Router -> Press Add -> and thats
>>>>> it :)
>>>>
>>>> --
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "weewx-user" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/weewx-user/6ihvgtwnEGo/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> [email protected].
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>> You received this message because you are subscribed to a topic in the
>> Google Groups "weewx-user" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/weewx-user/6ihvgtwnEGo/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected] <javascript:>.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
