That's it, it works;)
my files were crappy (different units in the weewx.conf and skin.conf)
I also had a big problem with:
[[[Extras]]]
belchertown_root_url = http://192.168.1.20/weewx/belchertown
It's now settled.
I put the updated files
Le vendredi 7 décembre 2018 11:42:50 UTC+11, Philip Kutzenco a écrit :
>
> In your weew.conf file (which you attached earlier), HTML_ROOT shoud be
> the same under the [[Belchertown]] stanza and the [Highcharts_Belchertown]]
> stanza. Yours are different. I think they should also be pointing to the
> weewx/belchertown folder (though I'm not sure).
>
> I don't know if that would fix it, but give it a try.
> phil
>
> On Thursday, December 6, 2018 at 7:08:26 PM UTC-5, Teva MERVIN wrote:
>
> I use the apt-get.
> my web structure /var/www/html/weewx/belchertown
> All the files and directories are created (about / index.html ....), but
> not the index.html from the beginning
>
> I have this as an error message (message1.txt)
> Le vendredi 7 décembre 2018 10:57:01 UTC+11, Philip Kutzenco a écrit :
>
> I think that normally the Apache server should be serving up the files
> located in public_html/belchertown. On my weewx system, that is
> /home/weewx/public_html/belchertown. Did you install weewx with setup.py or
> apt-get. That will determine where that directory actually is (I used
> setup.py).
>
> What are the files in that directory? There should be an in
>
> ...
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
###############################################################################
# SKIN CONFIGURATION FILE #
# Copyright (c) 2010 Tom Keffer <[email protected]> #
###############################################################################
[Extras]
# General Site Defaults
belchertown_root_url = "http://192.168.1.20";
logo_image = ""
site_title = "Mon site météo"
radar_html = ""
footer_copyright_text = "Mon site météo"
# Enabled by default since majority of the theme is wrapped around the
charts
highcharts_enabled = 1
highcharts_graph_1 = "temperatureplot"
highcharts_graph_2 = "windplot"
highcharts_graph_3 = "rainplot"
highcharts_graph_4 = "winddirplot"
highcharts_graph_5 = "barometerplot"
highcharts_graph_6 = "radiationplot"
highcharts_show_windchill = 1
highcharts_show_heatindex = 1
highcharts_show_apptemp = 0
# If you've extended your weewx database to include the below, you can
enable them
show_apptemp = 0
show_windrun = 0
# Default page headers
graphs_page_header = "Weather Observation Graphs"
records_page_header = "Weather Observation Records"
reports_page_header = "Weather Observation Reports"
about_page_header = "About This Weather Station"
# MQTT Defaults
mqtt_enabled = 0
mqtt_host = ""
mqtt_port = 1883
mqtt_ssl = 0
mqtt_topic = ""
disconnect_live_website_visitor = 1800000
# Forecast defaults
forecast_enabled = 0
darksky_secret_key = ""
darksky_units = "auto"
darksky_lang = "en"
forecast_stale = 3540
# Earthquake defaults
earthquake_enabled = 0
earthquake_maxradiuskm = 1000
earthquake_stale = 10740
# Social Share Button Defaults
facebook_enabled = 0
twitter_enabled = 0
twitter_owner = ""
twitter_hashtags = "weewx #weather"
# Google Analytics
#googleAnalyticsId = UA-12345678-1
###############################################################################
[Units]
# This section is for managing the selection and formatting of units.
[[Groups]]
# For each group of measurements, this section sets what units to
# use for it.
# NB: The unit is always in the singular. I.e., 'mile_per_hour',
# NOT 'miles_per_hour'
group_altitude = meter # Options are 'foot' or
'meter'
group_degree_day = degree_C_day # Options are 'degree_F_day'
or 'degree_C_day'
group_direction = degree_compass
group_moisture = centibar
group_percent = percent
group_pressure = hPa # Options are 'inHg', 'mmHg',
'mbar', or 'hPa'
group_radiation = watt_per_meter_squared
group_rain = mm # Options are 'inch', 'cm', or
'mm'
group_rainrate = mm_per_hour # Options are 'inch_per_hour',
'cm_per_hour', or 'mm_per_hour'
group_speed = knot # Options are 'mile_per_hour',
'km_per_hour', 'knot', or 'meter_per_second'
group_speed2 = knot2 # Options are 'mile_per_hour2',
'km_per_hour2', 'knot2', or 'meter_per_second2'
group_temperature = degree_C # Options are 'degree_F' or
'degree_C'
group_uv = uv_index
group_volt = volt
# The following are used internally and should not be changed:
group_count = count
group_interval = minute
group_time = unix_epoch
group_elapsed = second
[[StringFormats]]
# This section sets the string formatting for each type of unit.
centibar = %.0f
cm = %.2f
cm_per_hour = %.2f
degree_C = %.1f
degree_F = %.1f
degree_compass = %.0f
foot = %.0f
hPa = %.1f
hour = %.1f
inHg = %.3f
inch = %.2f
inch_per_hour = %.2f
km_per_hour = %.0f
km_per_hour2 = %.1f
knot = %.0f
knot2 = %.1f
mbar = %.1f
meter = %.0f
meter_per_second = %.1f
meter_per_second2 = %.1f
mile_per_hour = %.0f
mile_per_hour2 = %.1f
mm = %.1f
mmHg = %.1f
mm_per_hour = %.1f
percent = %.0f
second = %.0f
uv_index = %.1f
volt = %.1f
watt_per_meter_squared = %.0f
NONE = " N/A"
[[Labels]]
# This section sets a label to be used for each type of unit.
centibar = " cb"
cm = " cm"
cm_per_hour = " cm/hr"
degree_C = " °C"
degree_F = " °F"
degree_compass = °
foot = " feet"
hPa = " hPa"
inHg = " inHg"
inch = " in"
inch_per_hour = " in/hr"
km_per_hour = " km/h"
km_per_hour2 = " km/h"
knot = " knots"
knot2 = " knots"
mbar = " mbar"
meter = " meters"
meter_per_second = " m/s"
meter_per_second2 = " m/s"
mile_per_hour = " mph"
mile_per_hour2 = " mph"
mm = " mm"
mmHg = " mmHg"
mm_per_hour = " mm/hr"
percent = %
volt = " V"
watt_per_meter_squared = " W/m²"
day = " day", " days"
hour = " hour", " hours"
minute = " minute", " minutes"
second = " second", " seconds"
NONE = ""
[[TimeFormats]]
# This section sets the string format to be used for each time scale.
# The values below will work in every locale, but may not look
# particularly attractive. See the Customization Guide for alternatives.
day = %X
week = %X (%A)
month = %x %X
year = %x %X
rainyear = %x %X
current = %x %X
ephem_day = %X
ephem_year = %x %X
[[Ordinates]]
# The ordinal directions. The last one should be for no wind direction
directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW,
NW, NNW, N/A
[[DegreeDays]]
# This section sets the base temperatures used for the calculation
# of heating and cooling degree-days.
# Base temperature for heating days, with unit:
heating_base = 40, degree_C
# Base temperature for cooling days, with unit:
cooling_base = 12, degree_C
[[Trend]]
time_delta = 10800 # 3 hours
time_grace = 300 # 5 minutes
###############################################################################
[Labels]
# Labels used in this skin
# Set to hemisphere abbreviations suitable for your location:
hemispheres = N, S, E, W
# Formats to be used for latitude whole degrees, longitude whole degrees,
# and minutes:
latlon_formats = "%02d", "%03d", "%05.2f"
[[Generic]]
# Generic labels, keyed by an observation type.
barometer = Baromètre
dewpoint = Point de rosée
heatindex = Index de chaleur
inHumidity = Humidité Int
inTemp = Température Int
outHumidity = Humidité Ext
outTemp = Temperature Ext
radiation = Radiation
rain = Pluie
rainRate = taux Pluie
rxCheckPercent = ISS Signal Quality
UV = UV Index
windDir = Direction du Vent
windGust = Gust Speed
windGustDir = Gust Direction
windSpeed = Vitesse du Vent
windchill = Wind Chill
windgustvec = Gust Vector
windvec = Direction Vent
###############################################################################
[Almanac]
# The labels to be used for the phases of the moon:
moon_phases = New Moon, Waxing Crescent, First Quarter, Waxing Gibbous,
Full Moon, Waning Gibbous, Last Quarter, Waning Crescent
###############################################################################
[CheetahGenerator]
# This section is used by the generator CheetahGenerator, and specifies
# which files are to be generated from which template.
search_list_extensions = user.belchertown.getData
# Possible encodings are 'html_entities', 'utf8', or 'strict_ascii'
encoding = html_entities
[[SummaryByMonth]]
# Reports that summarize "by month"
[[[NOAA_month]]]
encoding = strict_ascii
template = NOAA/NOAA-YYYY-MM.txt.tmpl
[[SummaryByYear]]
# Reports that summarize "by year"
[[[NOAA_year]]]
encoding = strict_ascii
template = NOAA/NOAA-YYYY.txt.tmpl
[[ToDate]]
# Reports that show statistics "to date", such as day-to-date,
# week-to-date, month-to-date, etc.
[[[weewx_data]]]
template = json/weewx_data.json.tmpl
[[HighCharts_JS_Day]]
template = js/highcharts-dayplots.js.tmpl
[[HighCharts_JS_Week]]
template = js/highcharts-weekplots.js.tmpl
[[HighCharts_JS_Month]]
template = js/highcharts-monthplots.js.tmpl
[[HighCharts_JS_Year]]
template = js/highcharts-yearplots.js.tmpl
[[[home]]]
template = index.html.tmpl
[[[about]]]
template = about/index.html.tmpl
[[[graphs]]]
template = graphs/index.html.tmpl
[[[records]]]
template = records/index.html.tmpl
[[[reports]]]
template = reports/index.html.tmpl
[[[pi]]]
template = pi/index.html.tmpl
###############################################################################
[CopyGenerator]
# This section is used by the generator CopyGenerator
# List of files to be copied only the first time the generator runs
copy_once = favicon.ico, images/*, json/index.html, js/index.html,
js/responsive-menu.js
# List of files to be copied each time the generator runs
copy_always = style.css
###############################################################################
#
# The list of generators that are to be run:
#
[Generators]
generator_list = weewx.cheetahgenerator.CheetahGenerator,
weewx.reportengine.CopyGenerator
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.8.2
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = La Saoui - Bourail - Nouvelle-Calédonie
# Latitude and longitude in decimal degrees
latitude = -21.5669
longitude = 165.49736
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 9, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = WMR200
# If you have a website, you may specify an URL
station_url = http://192.168.1.20/weewx
# belchertown_root_url = http://192.168.1.20/weewx
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
##############################################################################
[WMR200]
# This section is for the Oregon Scientific WMR200
# The station model, e.g., WMR200, WMR200A, Radio Shack W200
model = WMR200
# The driver to use:
driver = weewx.drivers.wmr200
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
# To guard against parsing errors, put the password in quotes.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
# To guard against parsing errors, put the password in quotes.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standart-FR
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = knot2
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = knot
[[Highcharts_Belchertown]]
HTML_ROOT = /var/www/html/weewx/belchertown
skin = Highcharts_Belchertown
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = knot
group_speed2 = knot2
group_temperature = degree_C
[[Belchertown]]
HTML_ROOT = /var/www/html/weewx/belchertown
skin = Belchertown
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_degree_day = degree_C_day
group_pressure = hPa
group_rain = mm
group_rainrate = mm_per_hour
group_speed = knot
group_speed2 = knot2
group_temperature = degree_C
[[[Extras]]]
belchertown_root_url = http://192.168.1.20/weewx/belchertown
# [[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
# skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
# Use quotes around passwords to guard against parsing errors.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
# secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
# port = 21
# Set to 1 to use passive mode, zero for active mode
# passive = 1
# [[RSYNC]]
# rsync'ing to a webserver is treated as just another report
# skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The server, user, and path determine where files will be sent.
# The server is the server name, such as www.threefools.org
# The user is the username, such as weewx
# The path is the destination directory, such as /var/www/html/weather
# Be sure that the user has write permissions on the destination!
#server = replace_me
#user = replace_me
#path = replace_me
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
# delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRICWX # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 800, 1030
outTemp = -1, 80, degree_C
inTemp = -1, 60, degree_C
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 40
pressure = 800, 1030
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = hardware
heatindex = hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
# [[archive_sqlite]]
# database_type = SQLite
# database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx1_new
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
# [[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
# SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = ........
# The password for the user name (quotes guard against parsing errors)
password = .......
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate, user.crt.CumulusRealTime
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
# Options for extension 'crt'
[CumulusRealTime]
filename = /var/www/html/realtime.txt
unit_system = METRICWX # options are US, METRIC, METRICWX
#[CumulusRealTime]
# filename = /var/www/html/W34-WX/realtime.txt
# unit_system = METRICWX # options are US, METRIC, METRICWX
