Personally I disagree and would rather there were NO preset values in weewx.conf!! Certainly I do not like anything that is in weewx.conf to be in US units anyway so Farenheit is out as far as I am concerned, and I prefer to use knots for wind speed. Since it is not possible to satisfy everybody my option would be to leave all of them out and let users add the ones which they wish to use - which is pretty much the way it is now. Users should read the manuals anyway before using the software, and so would discover all about the QC section!!
On Saturday, 10 November 2018 15:45:49 UTC+2, Per Edström wrote: > > I would also suggest that all extra sensors are pre-added in the quality > control. If they are not used by the weather station or the user then I > guess that there is no harm done anyway. > > Oregon WMR200 can have a total of 10 sensors (where channel = 1 is the > outdoor sensor but it can be replaced with e.g. THGR-810 set on channel 1). > As we don't know where the user might place the extra sensors we might have > to extend the quality range to outdoor usage: > > [[MinMax]] > barometer = 26, 32.5, inHg > outTemp = -40, 120, degree_F > inTemp = 10, 120, degree_F > extraTemp2 = -40, 120, degree_F > extraTemp3 = -40, 120, degree_F > extraTemp4 = -40, 120, degree_F > extraTemp5 = -40, 120, degree_F > extraTemp6 = -40, 120, degree_F > extraTemp7 = -40, 120, degree_F > extraTemp8 = -40, 120, degree_F > extraTemp9 = -40, 120, degree_F > extraTemp10 = -40, 120, degree_F > outHumidity = 0, 100 > inHumidity = 0, 100 > extraHumid2 = 0, 100 > extraHumid3 = 0, 100 > extraHumid4 = 0, 100 > extraHumid5 = 0, 100 > extraHumid6 = 0, 100 > extraHumid7 = 0, 100 > extraHumid8 = 0, 100 > extraHumid9 = 0, 100 > extraHumid10 = 0, 100 > windSpeed = 0, 120, mile_per_hour > UV = 0, 6 > rain = 0, 6, inch > pressure = 24, 34.5, inHg > > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
