So like many others before me, I will ask how can I display the daily highcharts in metric. Week and year-plots are okay. One the day charts are in US. So I put the weewx.conf and the skin.conf of the highcharts-skin in the attachment. I hope anyone knows the solution. Nothing here helped me with this problem.
-- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
############################################################################### # SKIN CONFIGURATION FILE # # Copyright (c) 2010 Tom Keffer <[email protected]> # ############################################################################### [Extras] ############################################################################### [Units] # This section is for managing the selection and formatting of units. [[Groups]] # For each group of measurements, this section sets what units to # use for it. # NB: The unit is always in the singular. I.e., 'mile_per_hour', # NOT 'miles_per_hour' group_altitude = meter # Options are 'foot' or 'meter' group_degree_day = degree_C_day # Options are 'degree_F_day' or 'degree_C_day' group_direction = degree_compass group_moisture = centibar group_percent = percent group_pressure = mbar # Options are 'inHg', 'mmHg', 'mbar', or 'hPa' group_radiation = watt_per_meter_squared group_rain = mm # Options are 'inch', 'cm', or 'mm' group_rainrate = mm_per_hour # Options are 'inch_per_hour', 'cm_per_hour', or 'mm_per_hour' group_speed = km_per_hour # Options are 'mile_per_hour', 'km_per_hour', 'knot', or 'meter_per_second' group_speed2 = km_per_hour2 # Options are 'mile_per_hour2', 'km_per_hour2', 'knot2', or 'meter_per_second2' group_temperature = degree_C # Options are 'degree_F' or 'degree_C' group_uv = uv_index group_volt = volt # The following are used internally and should not be changed: group_count = count group_interval = minute group_time = unix_epoch group_elapsed = second [[StringFormats]] # This section sets the string formatting for each type of unit. centibar = %.0f cm = %.2f cm_per_hour = %.2f degree_C = %.1f degree_F = %.1f degree_compass = %.0f foot = %.0f hPa = %.1f hour = %.1f inHg = %.3f inch = %.2f inch_per_hour = %.2f km_per_hour = %.0f km_per_hour2 = %.1f knot = %.0f knot2 = %.1f mbar = %.1f meter = %.0f meter_per_second = %.1f meter_per_second2 = %.1f mile_per_hour = %.0f mile_per_hour2 = %.1f mm = %.1f mmHg = %.1f mm_per_hour = %.1f percent = %.0f second = %.0f uv_index = %.1f volt = %.1f watt_per_meter_squared = %.0f NONE = " N/A" [[Labels]] # This section sets a label to be used for each type of unit. centibar = " cb" cm = " cm" cm_per_hour = " cm/hr" degree_C = " °C" degree_F = " °F" degree_compass = ° foot = " feet" hPa = " hPa" inHg = " inHg" inch = " in" inch_per_hour = " in/hr" km_per_hour = " km/h" km_per_hour2 = " km/h" knot = " knots" knot2 = " knots" mbar = " mbar" meter = " meters" meter_per_second = " m/s" meter_per_second2 = " m/s" mile_per_hour = " mph" mile_per_hour2 = " mph" mm = " mm" mmHg = " mmHg" mm_per_hour = " mm/hr" percent = % volt = " V" watt_per_meter_squared = " W/m²" day = " day", " days" hour = " hour", " hours" minute = " minute", " minutes" second = " second", " seconds" NONE = "" [[TimeFormats]] # This section sets the string format to be used for each time scale. # The values below will work in every locale, but may not look # particularly attractive. See the Customization Guide for alternatives. day = %X week = %X (%A) month = %x %X year = %x %X rainyear = %x %X current = %x %X ephem_day = %X ephem_year = %x %X [[Ordinates]] # The ordinal directions. The last one should be for no wind direction directions = N, NNE, NE, ENE, E, ESE, SE, SSE, S, SSW, SW, WSW, W, WNW, NW, NNW, N/A [[DegreeDays]] # This section sets the base temperatures used for the calculation # of heating and cooling degree-days. # Base temperature for heating days, with unit: heating_base = 65, degree_F # Base temperature for cooling days, with unit: cooling_base = 65, degree_F [[Trend]] time_delta = 10800 # 3 hours time_grace = 300 # 5 minutes ############################################################################### [Labels] # Labels used in this skin # Set to hemisphere abbreviations suitable for your location: hemispheres = N, S, E, W # Formats to be used for latitude whole degrees, longitude whole degrees, # and minutes: latlon_formats = "%02d", "%03d", "%05.2f" [[Generic]] # Generic labels, keyed by an observation type. barometer = Barometer dewpoint = Dew Point heatindex = Heat Index inHumidity = Inside Humidity inTemp = Inside Temperature outHumidity = Outside Humidity outTemp = Outside Temperature radiation = Radiation rain = Rain rainRate = Rain Rate rxCheckPercent = ISS Signal Quality UV = UV Index windDir = Wind Direction windGust = Gust Speed windGustDir = Gust Direction windSpeed = Wind Speed windchill = Wind Chill windgustvec = Gust Vector windvec = Wind Vector ############################################################################### [Almanac] # The labels to be used for the phases of the moon: moon_phases = New Moon, Waxing Crescent, First Quarter, Waxing Gibbous, Full Moon, Waning Gibbous, Last Quarter, Waning Crescent ############################################################################### [CheetahGenerator] # This section is used by the generator CheetahGenerator, and specifies # which files are to be generated from which template. search_list_extensions = user.belchertown_highchartsSearchX.highchartsDay, user.belchertown_highchartsSearchX.highchartsWeek, user.belchertown_highchartsSearchX.highchartsMonth, user.belchertown_highchartsSearchX.highchartsYear # Possible encodings are 'html_entities', 'utf8', or 'strict_ascii' encoding = html_entities [[ToDate]] # Highcharts day json data [[[DayJSON]]] template = json/day.json.tmpl # Highcharts week json data [[[WeekJSON]]] template = json/week.json.tmpl # Highcharts month json data [[[MonthJSON]]] template = json/month.json.tmpl # Highcharts year json data [[[YearJSON]]] template = json/year.json.tmpl ############################################################################### [CopyGenerator] # This section is used by the generator CopyGenerator # List of files to be copied only the first time the generator runs copy_once = favicon.ico, images/*, json/index.html, js/index.html, js/responsive-menu.js # List of files to be copied each time the generator runs copy_always = style.css ############################################################################### # # The list of generators that are to be run: # [Generators] generator_list = weewx.cheetahgenerator.CheetahGenerator, weewx.reportengine.CopyGenerator
# WEEWX CONFIGURATION FILE # # Copyright (c) 2009-2015 Tom Keffer <[email protected]> # See the file LICENSE.txt for your rights. ############################################################################## # This section is for general configuration information. # Set to 1 for extra debug info, otherwise comment it out or set to zero debug = 0 # Root directory of the weewx data file hierarchy for this station WEEWX_ROOT = / # How long to wait before timing out a socket (FTP, HTTP) connection socket_timeout = 20 # Do not modify this. It is used when installing and updating weewx. version = 3.8.2 ############################################################################## # This section is for information about the station. [Station] # Description of the station location location = Wittlich Hauptbahnhof # Latitude and longitude in decimal degrees latitude = 49.973 longitude = 6.942 # Altitude of the station, with unit it is in. This is downloaded from # from the station if the hardware supports it. altitude = 160, meter # Set to type of station hardware. There must be a corresponding stanza # in this file with a 'driver' parameter indicating the driver to be used. station_type = Interceptor # If you have a website, you may specify an URL station_url = http://www.wetter-wittlich.de # The start of the rain year (1=January; 10=October, etc.). This is # downloaded from the station if the hardware supports it. rain_year_start = 1 # Start of week (0=Monday, 6=Sunday) week_start = 0 ############################################################################## [Simulator] # This section is for the weewx weather station simulator # The time (in seconds) between LOOP packets. loop_interval = 2.5 # The simulator mode can be either 'simulator' or 'generator'. # Real-time simulator. Sleep between each LOOP packet. mode = simulator # Generator. Emit LOOP packets as fast as possible (useful for testing). #mode = generator # The start time. Format is YYYY-mm-ddTHH:MM. If not specified, the default # is to use the present time. #start = 2011-01-01T00:00 # The driver to use: driver = weewx.drivers.simulator ############################################################################## # This section is for uploading data to Internet sites [StdRESTful] [[StationRegistry]] # To register this weather station with weewx, set this to true register_this_station = false [[AWEKAS]] # This section is for configuring posts to AWEKAS. # If you wish to do this, set the option 'enable' to true, # and specify a username and password. # To guard against parsing errors, put the password in quotes. enable = false username = replace_me password = replace_me [[CWOP]] # This section is for configuring posts to CWOP. # If you wish to do this, set the option 'enable' to true, # and specify the station ID (e.g., CW1234). enable = false station = replace_me # If this is an APRS (radio amateur) station, uncomment # the following and replace with a passcode (e.g., 12345). #passcode = replace_me (APRS stations only) [[PWSweather]] # This section is for configuring posts to PWSweather.com. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[WOW]] # This section is for configuring posts to WOW. # If you wish to do this, set the option 'enable' to true, # and specify a station and password. # To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me [[Wunderground]] # This section is for configuring posts to the Weather Underground. # If you wish to do this, set the option 'enable' to true, # and specify a station (e.g., 'KORHOODR3') and password. # To guard against parsing errors, put the password in quotes. enable = false station = replace_me password = replace_me # Set the following to True to have weewx use the WU "Rapidfire" # protocol. Not all hardware can support it. See the User's Guide. rapidfire = False ############################################################################## # This section specifies what reports, using which skins, to generate. [StdReport] # Where the skins reside, relative to WEEWX_ROOT SKIN_ROOT = /etc/weewx/skins # Where the generated reports should go, relative to WEEWX_ROOT HTML_ROOT = /var/www/html/weewx # The database binding indicates which data should be used in reports. data_binding = wx_binding # Each of the following subsections defines a report that will be run [[Highcharts_Belchertown]] skin = Highcharts_Belchertown [[[Units]]] [[[[Groups]]]] group_altitude = meter group_degree_day = degree_C_day group_pressure = mbar group_rain = mm group_rainrate = mm_per_hour group_speed = km_per_hour group_speed2 = km_per_hour2 group_temperature = degree_C [[Belchertown]] skin = Belchertown [[[Units]]] [[[[Groups]]]] group_altitude = meter group_degree_day = degree_C_day group_pressure = mbar group_rain = mm group_rainrate = mm_per_hour group_speed = km_per_hour group_speed2 = km_per_hour2 group_temperature = degree_C [[FTP]] # FTP'ing the results to a webserver is treated as just another report, # albeit one with an unusual report generator! skin = Ftp # If you wish to use FTP, uncomment and fill out the next four lines. # Use quotes around passwords to guard against parsing errors. user = password = server = path = # Set to True for an FTP over TLS (FTPS) connection. Not all servers # support this. secure_ftp = False # To upload files from something other than what HTML_ROOT is set # to above, specify a different HTML_ROOT here. #HTML_ROOT = /var/www/html/weewx # Most FTP servers use port 21 port = 21 # Set to 1 to use passive mode, zero for active mode passive = 1 [[RSYNC]] # rsync'ing to a webserver is treated as just another report skin = Rsync # If you wish to use rsync, you must configure passwordless ssh using # public/private key authentication from the user account that weewx # runs as to the user account on the remote machine where the files # will be copied. # # The server, user, and path determine where files will be sent. # The server is the server name, such as www.threefools.org # The user is the username, such as weewx # The path is the destination directory, such as /var/www/html/weather # Be sure that the user has write permissions on the destination! #server = replace_me #user = replace_me #path = replace_me # Rsync can be configured to remove files from the remote server if # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you # make a mistake in the remote path, you could could unintentionally # cause unrelated files to be deleted. Set to 1 to enable remote file # deletion, zero to allow files to accumulate remotely. delete = 0 ############################################################################## # This service acts as a filter, converting the unit system coming from # the hardware to a unit system in the database. [StdConvert] # The target_unit affects only the unit system in the database. Once # chosen it cannot be changed without converting the entire database. # Modification of target_unit after starting weewx will result in # corrupt data - the database will contain a mix of US and METRIC data. # # The value of target_unit does not affect the unit system for # reporting - reports can display US, Metric, or any combination of units. # # In most cases, target_unit should be left as the default: US # # In particular, those migrating from a standard wview installation # should use US since that is what the wview database contains. # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING! target_unit = US # Options are 'US', 'METRICWX', or 'METRIC' ############################################################################## # This section can adjust data using calibration expressions. [StdCalibrate] [[Corrections]] # For each type, an arbitrary calibration expression can be given. # It should be in the units defined in the StdConvert section. # Example: foo = foo + 0.2 ############################################################################## # This section is for quality control checks. If units are not specified, # values must be in the units defined in the StdConvert section. [StdQC] [[MinMax]] barometer = 26, 32.5, inHg outTemp = -40, 120, degree_F inTemp = 10, 120, degree_F outHumidity = 0, 100 inHumidity = 0, 100 windSpeed = 0, 120, mile_per_hour pressure = 24, 34.5, inHg ############################################################################## # This section controls the origin of derived values. [StdWXCalculate] [[Calculations]] # Derived quantities are calculated by this service. Possible values are: # hardware - use the value provided by hardware # software - use the value calculated by weewx # prefer_hardware - use value provide by hardware if available, # otherwise use value calculated by weewx pressure = prefer_hardware barometer = prefer_hardware altimeter = prefer_hardware windchill = prefer_hardware heatindex = prefer_hardware dewpoint = prefer_hardware inDewpoint = prefer_hardware rainRate = prefer_hardware ############################################################################## # For hardware that supports it, this section controls how often the # onboard clock gets updated. [StdTimeSynch] # How often to check the weather station clock for drift (in seconds) clock_check = 14400 # How much it can drift before we will correct it (in seconds) max_drift = 5 ############################################################################## # This section is for configuring the archive service. [StdArchive] # If the station hardware supports data logging then the archive interval # will be downloaded from the station. Otherwise, specify it (in seconds). archive_interval = 300 # If possible, new archive records are downloaded from the station # hardware. If the hardware does not support this, then new archive # records will be generated in software. # Set the following to "software" to force software record generation. record_generation = hardware # Whether to include LOOP data in hi/low statistics loop_hilo = True # The data binding used to save archive records data_binding = wx_binding ############################################################################## # This section binds a data store to a database. [DataBindings] [[wx_binding]] # The database must match one of the sections in [Databases]. # This is likely to be the only option you would want to change. database = archive_sqlite # The name of the table within the database table_name = archive # The manager handles aggregation of data for historical summaries manager = weewx.wxmanager.WXDaySummaryManager # The schema defines the structure of the database. # It is *only* used when the database is created. schema = schemas.wview.schema ############################################################################## # This section defines various databases. [Databases] # A SQLite database is simply a single file [[archive_sqlite]] database_type = SQLite database_name = weewx.sdb # MySQL [[archive_mysql]] database_type = MySQL database_name = weewx ############################################################################## # This section defines defaults for the different types of databases. [DatabaseTypes] # Defaults for SQLite databases [[SQLite]] driver = weedb.sqlite # Directory in which the database files are located SQLITE_ROOT = /var/lib/weewx # Defaults for MySQL databases [[MySQL]] driver = weedb.mysql # The host where the database is located host = localhost # The user name for logging in to the host user = weewx # The password for the user name (quotes guard against parsing errors) password = ############################################################################## # This section configures the internal weewx engine. [Engine] [[Services]] # This section specifies the services that should be run. They are # grouped by type, and the order of services within each group # determines the order in which the services will be run. prep_services = weewx.engine.StdTimeSynch data_services = , process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate archive_services = weewx.engine.StdArchive restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS report_services = weewx.engine.StdPrint, weewx.engine.StdReport ############################################################################## [Interceptor] # This section is for the network traffic interceptor driver. # The driver to use: driver = user.interceptor device_type = mode = iface = pcap_filter =
