# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <tkeffer@gmail.com>
# See the file LICENSE.txt for your rights.

##############################################################################

# This section is for general configuration information.

# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 0

# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /home/weewx

# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20

# Do not modify this. It is used when installing and updating weewx.
version = 3.8.0

##############################################################################

#   This section is for information about the station.

[Station]
    
    # Description of the station location
    location = "Valencia Pointe - Boynton Beach, FL"
    
    # Latitude and longitude in decimal degrees
    latitude = 26.514
    longitude = -80.155
    
    # Altitude of the station, with unit it is in. This is downloaded from
    # from the station if the hardware supports it.
    altitude = 30, foot    # Choose 'foot' or 'meter' for unit
    
    # Set to type of station hardware. There must be a corresponding stanza
    # in this file with a 'driver' parameter indicating the driver to be used.
    station_type = Ultimeter
    
    # If you have a website, you may specify an URL
    #station_url = http://www.example.com
    
    # The start of the rain year (1=January; 10=October, etc.). This is
    # downloaded from the station if the hardware supports it.
    rain_year_start = 1
    
    # Start of week (0=Monday, 6=Sunday)
    week_start = 6
    station_url = http://www.photokinetics.org/Weather
[CC3000]
    # This section is for RainWise MarkIII weather stations and CC3000 logger.
    
    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0
    
    # The station model, e.g., CC3000 or CC3000R
    model = CC3000
    
    # The driver to use:
    driver = weewx.drivers.cc3000
[FineOffsetUSB]
    # This section is for the Fine Offset series of weather stations.
    
    # The station model, e.g., WH1080, WS1090, WS2080, WH3081
    model = WS2080
    
    # The polling mode can be PERIODIC or ADAPTIVE
    polling_mode = PERIODIC
    
    # How often to poll the station for data, in seconds
    polling_interval = 60
    
    # The pressure calibration offset, in hPa (millibars)
    pressure_offset = 0
    
    # The driver to use:
    driver = weewx.drivers.fousb
[Simulator]
    # This section for the weewx weather station simulator
    
    # The time (in seconds) between LOOP packets.
    loop_interval = 2.5
    
    # The simulator mode can be either 'simulator' or 'generator'.
    # Real-time simulator. Sleep between each LOOP packet.
    mode = simulator
    # Generator.  Emit LOOP packets as fast as possible (useful for testing).
    #mode = generator
    
    # The start time. If not specified, the default is to use the present time.
    #start = 2011-01-01 00:00
    
    # The driver to use:
    driver = weewx.drivers.simulator
[TE923]
    # This section is for the Hideki TE923 series of weather stations.
    
    # The station model, e.g., 'Meade TE923W' or 'TFA Nexus'
    model = TE923
    
    # The driver to use:
    driver = weewx.drivers.te923
    
    # The default configuration associates the channel 1 sensor with outTemp
    # and outHumidity.  To change this, or to associate other channels with
    # specific columns in the database schema, use the following maps.
    [[sensor_map]]
        # Map the remote sensors to columns in the database schema.
        outTemp = t_1
        outHumidity = h_1
        extraTemp1 = t_2
        extraHumid1 = h_2
        extraTemp2 = t_3
        extraHumid2 = h_3
        extraTemp3 = t_4
        # WARNING: the following are not in the default schema
        extraHumid3 = h_4
        extraTemp4 = t_5
        extraHumid4 = h_5
    
    [[battery_map]]
        txBatteryStatus = batteryUV
        windBatteryStatus = batteryWind
        rainBatteryStatus = batteryRain
        outTempBatteryStatus = battery1
        # WARNING: the following are not in the default schema
        extraBatteryStatus1 = battery2
        extraBatteryStatus2 = battery3
        extraBatteryStatus3 = battery4
        extraBatteryStatus4 = battery5

##############################################################################

[Ultimeter]
    # This section is for the PeetBros Ultimeter series of weather stations.
    
    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0
    
    # The station model, e.g., Ultimeter 2000, Ultimeter 100
    model = Ultimeter 2100
    
    # The driver to use:
    driver = weewx.drivers.ultimeter

[Vantage]
    # This section is for a Davis VantagePro2, VantageVue or WeatherLinkIP
    
    # Connection type: serial or ethernet 
    #  serial (the classic VantagePro)
    #  ethernet (the WeatherLinkIP)
    type = serial
    
    # If the connection type is serial, a port must be specified:
    #   Debian, Ubuntu, Redhat, Fedora, and SuSE:
    #     /dev/ttyUSB0 is a common USB port name
    #     /dev/ttyS0   is a common serial port name
    #   BSD:
    #     /dev/cuaU0   is a common serial port name
    port = /dev/ttyUSB0
    
    # If the connection type is ethernet, an IP Address/hostname is required:
    host = 1.2.3.4
    
    ######################################################
    # The rest of this section rarely needs any attention. 
    # You can safely leave it "as is."
    ######################################################
    
    # Serial baud rate (usually 19200)
    baudrate = 19200
    
    # TCP port (when using the WeatherLinkIP)
    tcp_port = 22222
    
    # TCP send delay (when using the WeatherLinkIP):
    tcp_send_delay = 1
    
    # The id of your ISS station (usually 1)
    iss_id = 1
    
    # How long to wait for a response from the station before giving up (in
    # seconds; must be greater than 2)
    timeout = 5
    
    # How long to wait before trying again (in seconds)
    wait_before_retry = 1.2
    
    # How many times to try before giving up:
    max_tries = 4
    
    # The driver to use:
    driver = weewx.drivers.vantage
[WMR100]
    # This section is for the Oregon Scientific WMR100
    
    # The station model, e.g., WMR100, WMR100N, WMRS200
    model = WMR100
    
    # How long a wind record can be used to calculate wind chill (in seconds)
    stale_wind = 30
    
    # The driver to use:
    driver = weewx.drivers.wmr100
[WMR200]
    # This section is for the Oregon Scientific WMR200
    
    # The station model, e.g., WMR200, WMR200A, Radio Shack W200
    model = WMR200
    
    # The driver to use:
    driver = weewx.drivers.wmr200
[WMR9x8]
    # This section is for the Oregon Scientific WMR918/968
    
    # Connection type. For now, 'serial' is the only option. 
    type = serial
    
    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0
    
    # The station model, e.g., WMR918, Radio Shack 63-1016
    model = WMR968
    
    # The driver to use:
    driver = weewx.drivers.wmr9x8
[WS1]
    # This section is for the ADS WS1 series of weather stations.
    
    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0
    
    # The driver to use:
    driver = weewx.drivers.ws1
[WS23xx]
    # This section is for the La Crosse WS-2300 series of weather stations.
    
    # Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0
    port = /dev/ttyUSB0
    
    # The station model, e.g., 'LaCrosse WS2317' or 'TFA Primus'
    model = LaCrosse WS23xx
    
    # The pressure calibration offset, in hPa (millibars)
    pressure_offset = 0
    
    # The driver to use:
    driver = weewx.drivers.ws23xx
[WS28xx]
    # This section is for the La Crosse WS-2800 series of weather stations.
    
    # Radio frequency to use between USB transceiver and console: US or EU
    # US uses 915 MHz, EU uses 868.3 MHz.  Default is US.
    transceiver_frequency = US
    
    # The station model, e.g., 'LaCrosse C86234' or 'TFA Primus'
    model = LaCrosse WS28xx
    
    # The pressure calibration offset, in hPa (millibars)
    pressure_offset = 0
    
    # The driver to use:
    driver = weewx.drivers.ws28xx

##############################################################################

#   This section is for uploading data to Internet sites

[StdRESTful]
    
    [[StationRegistry]]
        # To register this weather station with weewx, set this to true
        register_this_station = True
    
    [[AWEKAS]]
        # This section is for configuring posts to AWEKAS.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify a username and password.
        enable = false
        username = replace_me
        password = replace_me
        log_success = True
        log_failure = True
    
    [[CWOP]]
        # This section is for configuring posts to CWOP.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify the station ID (e.g., CW1234).
        enable = false
        station = replace_me
        post_interval = 600
        log_success = True
        log_failure = True
    
    # If this is an APRS (radio amateur) station, uncomment
    # the following and replace with a passcode (e.g., 12345).
    #passcode = replace_me (APRS stations only)
    
    [[PWSweather]]
        # This section is for configuring posts to PWSweather.com.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.
        enable = true
        station = KFLBOYNT40
        password = XXXXXXXX
        log_success = True
        log_failure = True
    
    [[WOW]]
        # This section is for configuring posts to WOW.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify a station and password.
        enable = false
        station = replace_me
        password = replace_me
        log_success = True
        log_failure = True
    
    [[Wunderground]]
        # This section is for configuring posts to the Weather Underground.
        
        # If you wish to do this, set the option 'enable' to true,
        # and specify a station (e.g., 'KORHOODR3') and password.
        enable = true
        station = KFLBOYNT40
        password = XXXXXXX
        
        # Set the following to True to have weewx use the WU "Rapidfire"
        # protocol. Not all hardware can support it. See the User's Guide.
        rapidfire = True

##############################################################################

#   This section specifies what reports, using which skins, to generate.

[StdReport]
    
    # Where the skins reside, relative to WEEWX_ROOT
    SKIN_ROOT = skins
    
    # Where the generated reports should go, relative to WEEWX_ROOT
    HTML_ROOT = public_html
    
    # The database binding indicates which data should be used in reports.
    data_binding = wx_binding
    
    # Each of the following subsections defines a report that will be run.
    
    [[StandardReport]]
        # See the customizing guide to change the units, plot types and line
        # colors, modify the fonts, display additional sensor data, and other
        # customizations. Many of those changes can be made here by overriding
        # parameters, or by modifying templates within the skin itself.
        
        # The StandardReport uses the 'Standard' skin, which contains the
        # images, templates and plots for the report.
        skin = Standard
    #   [[forecast]]
    #       [[[Extras]]]
    #           [[[[forecast_compact_settings]]]]
    #               source = WU
    #               num_days = 3
    
    [[SteelSeries]]
        skin = ss
        HTML_ROOT = public_html/ss
        [[[Units]]]
            [[[[StringFormats]]]]
                mm_per_hour = %.1f
                mile_per_hour = %.0f
                degree_compass = %.0f
                degree_C = %.1f
                inHg = %.3f
                mmHg = %.1f
                meter_per_second = %.1f
                meter = %.0f
                mile = %.1f
                uv_index = %.1f
                watt_per_meter_squared = %.0f
                percent = %.0f
                km_per_hour = %.0f
                inch = %.2f
                degree_F = %.1f
                knot = %.0f
                foot = %.0f
                hPa = %.1f
                mbar = %.1f
                inch_per_hour = %.2f
                mm = %.1f
                km = %.1f
            [[[[Groups]]]]
                group_temperature = degree_C
                group_altitude = foot
                group_pressure = hPa
                group_rain = mm
                group_rainRate = mm_per_hour
                group_speed = km_per_hour
    
    [[FTP]]
        # FTP'ing the results to a webserver is treated as just another report,
        # albeit one with an unusual report generator!
        skin = Ftp
        
        # If you wish to use FTP, uncomment and fill out the next four lines.
        #user = replace with the ftp username
        #password = replace with the ftp password
        #server = replace with the ftp server name, e.g, www.threefools.org
        #path = replace with the ftp destination directory (e.g., /weather)
        
        # Set to True for a secure FTP (SFTP) connection. Not all servers
        # support this.
        secure_ftp = false
        
        # To upload files from something other than what HTML_ROOT is set
        # to above, specify a different HTML_ROOT here.
        #HTML_ROOT = public_html
        
        # Most FTP servers use port 21
        port = 21
        
        # Set to 1 to use passive mode, zero for active mode
        passive = 0
        max_tries = 3
        user = XXXXX
        password = XXXXXXXXX
        server = www.photokinetics.org
        path = photokinetics.org/Weather
    
    [[RSYNC]]
        # rsync'ing to a webserver is treated as just another report
        skin = Rsync
        
        # If you wish to use rsync, you must configure passwordless ssh using
        # public/private key authentication from the user account that weewx
        # runs as to the user account on the remote machine where the files
        # will be copied.
        #
        # The following three lines determine where files will be sent.
        #server = replace with the rsync server name, e.g, www.threefools.org
        #path = replace with the rsync destination directory (e.g., /weather)
        #user = replace with the rsync username
        
        # Rsync can be configured to remove files from the remote server if
        # they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
        # make a mistake in the remote path, you could could unintentionally
        # cause unrelated files to be deleted. Set to 1 to enable remote file
        # deletion, zero to allow files to accumulate remotely.
        delete = 0

##############################################################################

#   This service acts as a filter, converting the unit system coming from
#   the hardware to a unit system in the database.

[StdConvert]
    
    # The target_unit affects only the unit system in the database. Once
    # chosen it cannot be changed without converting the entire database.
    # Modification of target_unit after starting weewx will result in
    # corrupt data - the database will contain a mix of US and METRIC data.
    #
    # The value of target_unit does not affect the unit system for
    # reporting - reports can display US, Metric, or any combination of units.
    #
    # In most cases, target_unit should be left as the default: US
    #
    # In particular, those migrating from a standard wview installation
    # should use US since that is what the wview database contains.
    
    # DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
    target_unit = US    # Options are 'US', 'METRICWX', or 'METRIC'

##############################################################################

#   This section can adjust data using calibration expressions.

[StdCalibrate]
    
    [[Corrections]]
        # For each type, an arbitrary calibration expression can be given. 
        # It should be in the units defined in the StdConvert section.
        # Example:
        foo = foo + 0.2
        windDir = windDir - 1.0

##############################################################################

#   This section is for quality control checks. If units are not specified,
#   values must be in the units defined in the StdConvert section.

[StdQC]
    
    [[MinMax]]
        barometer = 26, 32.5, inHg
        outTemp = -40, 120, degree_F
        inTemp = 10, 120, degree_F
        outHumidity = 0, 100
        inHumidity = 0, 100
        windSpeed = 0, 120, mile_per_hour
        rain = 0, 60, inch
        pressure = 24, 34.5, inHg
    
    #   The following added for spike detection
    
    [[Spike]]
        barometer = 1, 12, inHg
        outTemp = 20, 3, degree_F
        inTemp = 5, 3, degree_F
        outHumidity = 15, 3
        inHumidity = 10, 3
        windSpeed = 5, 3, mile_per_hour

##############################################################################

#   This section controls the origin of derived values.

[StdWXCalculate]
    ignore_zero_wind = True
    [[Calculations]]
        # Derived quantities are calculated by this service. Possible values are:
        #  hardware        - use the value provided by hardware
        #  software        - use the value calculated by weewx
        #  prefer_hardware - use value provide by hardware if available,
        #                      otherwise use value calculated by weewx
        
        pressure = prefer_hardware
        barometer = prefer_hardware
        altimeter = prefer_hardware
        windchill = prefer_hardware
        heatindex = prefer_hardware
        dewpoint = prefer_hardware
        inDewpoint = prefer_hardware
        #  rainRate = prefer_hardware
        rainRate = software
        #  added following 5/8/18
        windGust = software
##############################################################################

#   For hardware that supports it, this section controls how often the
#   onboard clock gets updated.

[StdTimeSynch]
    
    # How often to check the weather station clock for drift (in seconds)
    clock_check = 14400
    
    # How much it can drift before we will correct it (in seconds)
    max_drift = 5

##############################################################################

#   This section is for configuring the archive service.

[StdArchive]
    
    # If the station hardware supports data logging then the archive interval
    # will be downloaded from the station. Otherwise, specify it (in seconds).
    archive_interval = 120
    
    # How long to wait (in seconds) before processing new archive data. Must
    # be greater than zero.
    archive_delay = 1
    
    # If possible, new archive records are downloaded from the station
    # hardware. If the hardware does not support this, then new archive
    # records will be generated in software.
    # Set the following to "software" to force software record generation.
    record_generation = software
    
    # Whether to include LOOP data in hi/low statistics
    loop_hilo = True
    
    # The data binding used to save archive records
    data_binding = wx_binding

##############################################################################

#   This section binds a data store to a database.

[DataBindings]
    
    [[wx_binding]]
        # The database must match one of the sections in [Databases].
        # This is likely to be the only option you would want to change.
        database = archive_sqlite
        # The name of the table within the database
        table_name = archive
        # The manager handles aggregation of data for historical summaries
        manager = weewx.wxmanager.WXDaySummaryManager
        # The schema defines the structure of the database.
        # It is *only* used when the database is created.
        schema = schemas.wview.schema

##############################################################################

#   This section defines various databases.

[Databases]
    
    # A SQLite database is simply a single file
    [[archive_sqlite]]
        database_type = SQLite
        database_name = weewx.sdb
    
    # MySQL
    [[archive_mysql]]
        database_type = MySQL
        database_name = weewx

##############################################################################

#   This section defines defaults for the different types of databases.

[DatabaseTypes]
    
    # Defaults for SQLite databases
    [[SQLite]]
        driver = weedb.sqlite
        # Directory in which the database files are located
        SQLITE_ROOT = %(WEEWX_ROOT)s/archive
    
    # Defaults for MySQL databases
    [[MySQL]]
        driver = weedb.mysql
        # The host where the database is located
        host = localhost
        # The user name for logging in to the host
        user = weewx
        # The password for the user name
        password = weewx

##############################################################################

#   This section configures the internal weewx engine.

[Engine]
    
    [[Services]]
        # This section specifies the services that should be run. They are
        # grouped by type, and the order of services within each group
        # determines the order in which the services will be run.
        prep_services = weewx.engine.StdTimeSynch,
        data_services = ,
        process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
        archive_services = weewx.engine.StdArchive,
        restful_services = weewx.restx.StdStationRegistry, weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
        report_services = weewx.engine.StdPrint, weewx.engine.StdReport, user.alarm.MyAlarm, user.rtgd.RealtimeGaugeData

[Alarm]
    time_wait = 7200    # 2 hours between emails
    smtp_host = XXXX.gmail.comXXXX
    smtp_user = XXXXXXX@gmail.com
    smtp_password = XXXXXXXXXXX
    mailto = XXXXXX@gmail.com
    from = XXXXXX@gmail.com
    count = 4
    expression.0 = inTemp > 81.99
    subject.0 = Alarm from Weewx-Indoor temp > 82
    expression.1 = heatindex > 99.99
    subject.1 = Alarm from Weewx-HeatIndex > 100
    expression.2 = windSpeed > 24.99
    subject.2 = Alarm from Weewx-WindSpeed > 25 mph
    expression.3 = rainRate > 1.99
    subject.3 = Alarm from Weewx-RainRate > 2 in/hr

##############################################################################

# Options for extension 'Rtgd'
[RealtimeGaugeData]
    remote_server_url = http://photokinetics.org/Weather/post_gauge-data.php
    timeout = 2
    response_text = success
    date_format = %Y.%m.%d %H:%M
    rtgd_path = /home/weewx/public_html
    #Added 5/19/18 for scroller text
#    scroller_text = Valencia Pointe - Boyten Beach FL.    Hover over a chart for a graph
    [[StringFormats]]
        inch_per_hour = %.2f
        mile_per_hour = %.1f
        degree_compass = %.0f
        km_per_hour = %.1f
        inHg = %.2f
        mm = %.1f
        meter_per_second = %.1f
        percent = %.0f
        km = %.1f
        uv_index = %.1f
        inch = %.2f
        degree_F = %.1f
        meter = %.0f
        degree_C = %.1f
        mile = %.1f
        foot = %.0f
        hPa = %.1f
        mbar = %.1f
        watt_per_meter_squared = %.0f
        mm_per_hour = %.1f
    [[WU]]
        api_key = XXXXXXXXXXXXXXX
        enable = true
        location = 33437
        units = us
    [[Groups]]
        group_altitude = foot
        group_pressure = hPa
        group_rain = mm
        group_speed = km_per_hour
        group_temperature = degree_C

#############################################################################

# Options for extension 'pmon'
[ProcessMonitor]
    process = weewxd
    data_binding = pmon_binding
    
    
