Hello all,
for a few years now I've used weewx with interceptor to collect and store
data from my Aercus Weathersleuth and with no problems till this morning.
I enabled PWSweather and added the station name and password. Saved the
config file and restarted weewx.
And now I have quite a few parameters not recognised.
I've attached the weewx config file and a small section of syslog
Any help with this mystery would be much appreciated.
Regards,
Frits Schouten.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
Sep 6 14:11:34 snoopy weewx[2580]: engine: Terminating weewx version 3.6.0
Sep 6 14:11:39 snoopy weewx[3080]: engine: Initializing weewx version 3.6.0
Sep 6 14:11:39 snoopy weewx[3080]: engine: Using Python 2.7.6 (default, Nov 23
2017, 15:50:55) #012[GCC 4.8.4]
Sep 6 14:11:39 snoopy weewx[3080]: engine: Platform
Linux-3.13.0-147-generic-i686-with-Ubuntu-14.04-trusty
Sep 6 14:11:39 snoopy weewx[3080]: engine: pid file is /var/run/weewx.pid
Sep 6 14:11:39 snoopy weewx[3084]: engine: Using configuration file
/etc/weewx/weewx.conf
Sep 6 14:11:39 snoopy weewx[3084]: engine: Initializing engine
Sep 6 14:11:39 snoopy weewx[3084]: engine: Loading station type Interceptor
(user.interceptor)
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: driver version is
0.30
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: device type:
acurite-bridge
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: sensor map: None
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: mode is listen
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: listen on :9999
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdTimeSynch
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdTimeSynch
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdConvert
Sep 6 14:11:40 snoopy weewx[3084]: engine: StdConvert target unit is 0x1
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdConvert
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdCalibrate
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: ServerThread: start tcp server
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdCalibrate
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service weewx.engine.StdQC
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdQC
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.wxservices.StdWXCalculate
Sep 6 14:11:40 snoopy weewx[3084]: wxcalculate: The following values will be
calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=prefer_hardware,
windrun=prefer_hardware, heatindex=prefer_hardware,
maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=prefer_hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Sep 6 14:11:40 snoopy weewx[3084]: wxcalculate: The following algorithms will
be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdArchive
Sep 6 14:11:40 snoopy weewx[3084]: engine: Archive will use data binding
wx_binding
Sep 6 14:11:40 snoopy weewx[3084]: engine: Record generation will be attempted
in 'hardware'
Sep 6 14:11:40 snoopy weewx[3084]: engine: Using archive interval of 300
seconds (specified in weewx configuration)
Sep 6 14:11:40 snoopy weewx[3084]: engine: Use LOOP data in hi/low
calculations: 1
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: ServerThread: GET:
ID=+ITEHAUMI2&PASSWORD=XXXX&tempf=58.1&humidity=70&dewptf=48.4&windchillf=58.1&winddir=244&windspeedmph=2.68&windgustmph=4.92&rainin=0.00&dailyrainin=0.05&weeklyrainin=0.09&monthlyrainin=0.28&yearlyrainin=44.00&solarradiation=236.18&UV=4&indoortempf=68.4&indoorhumidity=53&baromin=29.94&lowbatt=2&dateutc=2018-9-6%202:11:39&softwaretype=Weather%20logger%20V2.2.0&action=updateraw&realtime=1&rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: engine: Using binding 'wx_binding' to
database 'weewx'
Sep 6 14:11:40 snoopy weewx[3084]: manager: Starting backfill of daily
summaries
Sep 6 14:11:40 snoopy weewx[3084]: manager: Daily summaries up to date
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdArchive
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.restx.StdStationRegistry
Sep 6 14:11:40 snoopy weewx[3084]: restx: StationRegistry: Registration not
requested.
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdStationRegistry
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.restx.StdWunderground
Sep 6 14:11:40 snoopy weewx[3084]: restx: Wunderground-PWS: Data for station
ITEHAUMI2 will be posted
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdWunderground
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.restx.StdPWSweather
Sep 6 14:11:40 snoopy weewx[3084]: restx: PWSWeather: Data for station ZASCHF
will be posted
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdPWSweather
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service weewx.restx.StdCWOP
Sep 6 14:11:40 snoopy weewx[3084]: restx: CWOP: Posting not enabled.
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdCWOP
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service weewx.restx.StdWOW
Sep 6 14:11:40 snoopy weewx[3084]: restx: WOW: Posting not enabled.
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdWOW
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.restx.StdAWEKAS
Sep 6 14:11:40 snoopy weewx[3084]: restx: AWEKAS: Posting not enabled.
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.restx.StdAWEKAS
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdPrint
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdPrint
Sep 6 14:11:40 snoopy weewx[3084]: engine: Loading service
weewx.engine.StdReport
Sep 6 14:11:40 snoopy weewx[3084]: engine: Finished loading service
weewx.engine.StdReport
Sep 6 14:11:40 snoopy weewx[3084]: engine: Starting up weewx version 3.6.0
Sep 6 14:11:40 snoopy weewx[3084]: engine: Station does not support reading
the time
Sep 6 14:11:40 snoopy weewx[3084]: engine: Starting main packet loop.
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: raw data:
ID=+ITEHAUMI2&PASSWORD=6udzjjqq&tempf=58.1&humidity=70&dewptf=48.4&windchillf=58.1&winddir=244&windspeedmph=2.68&windgustmph=4.92&rainin=0.00&dailyrainin=0.05&weeklyrainin=0.09&monthlyrainin=0.28&yearlyrainin=44.00&solarradiation=236.18&UV=4&indoortempf=68.4&indoorhumidity=53&baromin=29.94&lowbatt=2&dateutc=2018-9-6%202:11:39&softwaretype=Weather%20logger%20V2.2.0&action=updateraw&realtime=1&rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter windchillf=58.1
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
rainin=0.00
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter monthlyrainin=0.28
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter solarradiation=236.18
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
realtime=1
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter lowbatt=2
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter windgustmph=4.92
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
dewptf=48.4
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
PASSWORD=6udzjjqq
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
ID=+ITEHAUMI2
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter softwaretype=Weather%20logger%20V2.2.0
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter yearlyrainin=44.00
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter UV=4
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
action=updateraw
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter weeklyrainin=0.09
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored rainfall
0.05: no sensor_id
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: raw packet:
{'temperature_in..': 68.4, 'winddir..': 244.0, 'dateTime': 1536199899,
'usUnits..': 1, 'pressure..': 29.94, 'humidity_in..': 53.0, 'temperature..':
58.1, 'dateTime..': 1536199899, 'windspeed..': 2.68, 'rainfall..': None,
'usUnits': 1, 'humidity..': 70.0}
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: mapped packet:
{'pressure': 29.94, 'inHumidity': 53.0, 'inTemp': 68.4, 'usUnits': 1,
'dateTime': 1536199899}
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: ServerThread: GET:
ID=+ITEHAUMI2&PASSWORD=XXXX&tempf=58.1&humidity=70&dewptf=48.4&windchillf=58.1&winddir=244&windspeedmph=2.68&windgustmph=4.92&rainin=0.00&dailyrainin=0.05&weeklyrainin=0.09&monthlyrainin=0.28&yearlyrainin=44.00&solarradiation=236.18&UV=4&indoortempf=68.4&indoorhumidity=53&baromin=29.94&lowbatt=2&dateutc=2018-9-6%202:11:39&softwaretype=Weather%20logger%20V2.2.0&action=updateraw&realtime=1&rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: raw data:
ID=+ITEHAUMI2&PASSWORD=6udzjjqq&tempf=58.1&humidity=70&dewptf=48.4&windchillf=58.1&winddir=244&windspeedmph=2.68&windgustmph=4.92&rainin=0.00&dailyrainin=0.05&weeklyrainin=0.09&monthlyrainin=0.28&yearlyrainin=44.00&solarradiation=236.18&UV=4&indoortempf=68.4&indoorhumidity=53&baromin=29.94&lowbatt=2&dateutc=2018-9-6%202:11:39&softwaretype=Weather%20logger%20V2.2.0&action=updateraw&realtime=1&rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter windchillf=58.1
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
rainin=0.00
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter monthlyrainin=0.28
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter solarradiation=236.18
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
realtime=1
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
rtfreq=5
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter lowbatt=2
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter windgustmph=4.92
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
dewptf=48.4
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
PASSWORD=6udzjjqq
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
ID=+ITEHAUMI2
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter softwaretype=Weather%20logger%20V2.2.0
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter yearlyrainin=44.00
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter UV=4
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored parameter
action=updateraw
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: unrecognized
parameter weeklyrainin=0.09
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: ignored rainfall
0.05: no sensor_id
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: raw packet:
{'temperature_in..': 68.4, 'winddir..': 244.0, 'dateTime': 1536199899,
'usUnits..': 1, 'pressure..': 29.94, 'humidity_in..': 53.0, 'temperature..':
58.1, 'dateTime..': 1536199899, 'windspeed..': 2.68, 'rainfall..': None,
'usUnits': 1, 'humidity..': 70.0}
Sep 6 14:11:40 snoopy weewx[3084]: interceptor: MainThread: mapped packet:
{'pressure': 29.94, 'inHumidity': 53.0, 'inTemp': 68.4, 'usUnits': 1,
'dateTime': 1536199899}
Sep 6 14:11:50 snoopy weewx[3084]: interceptor: MainThread: empty queue
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.6.0
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "BayRiver B&B, Opua."
# Latitude and longitude in decimal degrees
latitude = -35.331
longitude = 174.098
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 40, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = Interceptor
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
# If you have a website, you may specify an URL
station_url = http://simple-pages.entrydns.org
register_this_station = True
##############################################################################
[Simulator]
# This section is for the weewx weather station simulator
# The time (in seconds) between LOOP packets.
loop_interval = 2.5
# The simulator mode can be either 'simulator' or 'generator'.
# Real-time simulator. Sleep between each LOOP packet.
mode = simulator
# Generator. Emit LOOP packets as fast as possible (useful for testing).
#mode = generator
# The start time. If not specified, the default is to use the present time.
#start = 2011-01-01 00:00
# The driver to use:
driver = weewx.drivers.simulator
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = false
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = true
station = ZASCHF
password = xxxxxxxxxxxxxx
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station = ITEHAUMI2
password = xxxxxxxxxxxxxxxxx
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/htdocs/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Standard
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = meter_per_second2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = meter_per_second
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
# How long to wait (in seconds) before processing new archive data. Must
# be greater than zero.
archive_delay = 15
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
[Interceptor]
device_type = acurite-bridge
port = 9999
driver = user.interceptor
