mwall writes:
> On Thursday, August 23, 2018 at 2:56:23 PM UTC-4, Adam Sjøgren wrote:
>> Configuring weewx to get information from --current instead the history
>> would be easier [for me, anyway :-)]. Is it possible, and if so, how?
> first try clearing the station memory - it looks like you might have
> corrupt data in the logger (you could use wee_device to dump the logger
> memory if you really want to go deep)
I should have mentioned that I had also tried that (using "sudo wee_device
--clear-memory"), besides the other things.
> also, be sure that your configuration is set to record_generation =
> software
It wasn't, but flipping it to "software" made no discernable difference
to the end result.
> if all else fails, you can make weewx think that your driver does not
> support reading of historical records by changing the name of
> genArchiveRecords to xgenArchiveRecords (line 1096 in the file fousb.py).
I tried this as well (and restarting weewx afterwards), but still no
updates.
> finally, beware that the fine offset 10x0/20x0/30x0 stations are very
> sensitive to voltage fluctuations on the usb. sometimes you will see the
> station randomly reset itself to factory defaults (resulting in an archive
> interval of 30 minutes). worst case you suffer the usb lockups, which can
> only be resolved by power cycling the station.
I haven't seen any of those symptoms, but I have ordered a new cable to
give it a last go before I ditch the station and try the RTL-SDR way.
Funnily wee_device --current still works a charm, so for my usecase it
would be fine if I could funnel that information into weewx.
Thanks for the answer!
Adam
--
"En pessimist i sitt livs form" Adam Sjøgren
[email protected]
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
