Glad you figured it out! I'd suggest leaving the post up though - it may help someone else in the future!
On Friday, August 17, 2018 at 10:32:51 AM UTC-4, [email protected] wrote: > > Re: Aercus Weather Ranger / Pi / Interceptor - All working except one last > hurdle - Solved - Syntax!! > Well as many have said, read the brilliant manual that Tom Keffer has > produced, as to quote 'the answer to your question will be found in there > and many questions you didn't know you had'! > > I thought I had; I have been eating and sleeping it for the last week or > so, but that didn't prevent me from making a 'school-boy' error - syntax!! > > Solved!..... > > > > The more observant of you out there, well certainly more observant than > me, will have noted that I copied and pasted a few commands I tried in [Std > Calibrate], namely: > > > windSpeed = WindSpeed * 3.6 > wind = wind * 3.6 > wind_speed = wind_speed * 3.6 > > Note the mistake on the first one: > > WindSpeed instead of: *w*indSpeed > > So now I know the commands/variables to input in the correct syntax: > > windGust > windSpeed > > It all works - problem solved. > > Throughout this whole process I have learnt a lot and enjoyed solving all > the problems. > > > *Thank you Tom Keffer and Mathew Wall - your work is superb and you have > raised the bar in my knowledge.* > > > I will leave this post up for a day or so just in case anyone is 'racking > their brains' to help me, then probably delete it, as I have answered my > own question. RTFQ as the say! > > > Happy and embarrassed, > > Dave. > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
