Last night, I performed routine Rapbian (Jessie) updates to my RaspBerry Pi
and also updated weewx from 3.7.1-1 to 3.8.0.1 and after the updates,
weewx has stopped publishing data to CWOP and Wunderground -- I'm still
getting data from my (Acurite) weather station which are going into the
database, creating graphs etc. -- it seems to be just the publishing part
that's stopped. I enabled debug (debug=1) in config file but don't see any
errors -- just not publishing -- I've tried downgrading weewx back to
3.7.1-1 to no avail -- I have not attempted to revert all the raspbian
updates yet.
I'd appreciate any advice as to how to go about debugging this -- thanks in
advance!
*weewx.log*
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Using configuration file
/etc/weewx/weewx.conf
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Loading station type
AcuRite (weewx.drivers.acurite)
Aug 15 23:25:24 raspberrypi weewx[1648]: acurite: driver version is 0.24
Aug 15 23:25:24 raspberrypi weewx[1648]: acurite: R2 will be decoded using
sensor constants
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: StdConvert target unit is
0x1
Aug 15 23:25:24 raspberrypi weewx[1648]: wxcalculate: The following values
will be calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer
_hardware, rainRate=prefer_hardware, windrun=prefer_hardware,
heatindex=prefer_hardware, maxSolarRad=prefer_hardware,
humidex=prefer_hardware, pressure=prefer_hardware, inDewpoint=prefer_ha
rdware, ET=prefer_hardware, altimeter=prefer_hardware,
cloudbase=prefer_hardware
Aug 15 23:25:24 raspberrypi weewx[1648]: wxcalculate: The following
algorithms will be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Archive will use data
binding wx_binding
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Record generation will be
attempted in 'hardware'
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Using archive interval of
300 seconds (specified in weewx configuration)
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Using binding 'wx_binding'
to database 'weewx.sdb'
Aug 15 23:25:24 raspberrypi weewx[1648]: manager: Starting backfill of
daily summaries
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: StationRegistry:
Registration not requested.
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: Wunderground-PWS: Data for
station KNHHAMPS9 will be posted
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: PWSweather: Posting not
enabled.
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: CWOP: Data for station
DW7229 will be posted
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: WOW: Posting not enabled.
Aug 15 23:25:24 raspberrypi weewx[1648]: restx: AWEKAS: Posting not enabled.
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Starting up weewx version
3.8.0
Aug 15 23:25:24 raspberrypi weewx[1648]: engine: Starting main packet loop.
Aug 15 23:30:25 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:30:00 EDT (1534390200) to database 'weewx.sdb'
Aug 15 23:30:25 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:30:00 EDT (1534390200) to daily summary in 'weewx.sdb'
Aug 15 23:30:29 raspberrypi weewx[1648]: cheetahgenerator: Generated 14
files for report StandardReport in 3.95 seconds
Aug 15 23:30:30 raspberrypi weewx[1648]: imagegenerator: Generated 12
images for StandardReport in 0.77 seconds
Aug 15 23:30:30 raspberrypi weewx[1648]: copygenerator: copied 9 files to
/var/www/html/weewx
Aug 15 23:35:20 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:35:00 EDT (1534390500) to database 'weewx.sdb'
Aug 15 23:35:20 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:35:00 EDT (1534390500) to daily summary in 'weewx.sdb'
Aug 15 23:35:22 raspberrypi weewx[1648]: cheetahgenerator: Generated 14
files for report StandardReport in 1.65 seconds
Aug 15 23:35:22 raspberrypi weewx[1648]: imagegenerator: Generated 12
images for StandardReport in 0.76 seconds
Aug 15 23:35:22 raspberrypi weewx[1648]: copygenerator: copied 0 files to
/var/www/html/weewx
Aug 15 23:40:27 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:40:00 EDT (1534390800) to database 'weewx.sdb'
Aug 15 23:40:27 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:40:00 EDT (1534390800) to daily summary in 'weewx.sdb'
Aug 15 23:40:28 raspberrypi weewx[1648]: cheetahgenerator: Generated 14
files for report StandardReport in 1.66 seconds
Aug 15 23:40:29 raspberrypi weewx[1648]: imagegenerator: Generated 12
images for StandardReport in 0.76 seconds
Aug 15 23:40:29 raspberrypi weewx[1648]: copygenerator: copied 0 files to
/var/www/html/weewx
Aug 15 23:45:15 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:45:00 EDT (1534391100) to database 'weewx.sdb'
Aug 15 23:45:15 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:45:00 EDT (1534391100) to daily summary in 'weewx.sdb'
Aug 15 23:45:17 raspberrypi weewx[1648]: cheetahgenerator: Generated 14
files for report StandardReport in 1.70 seconds
Aug 15 23:45:18 raspberrypi weewx[1648]: imagegenerator: Generated 12
images for StandardReport in 0.76 seconds
Aug 15 23:45:18 raspberrypi weewx[1648]: copygenerator: copied 0 files to
/var/www/html/weewx
Aug 15 23:50:22 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:50:00 EDT (1534391400) to database 'weewx.sdb'
Aug 15 23:50:22 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:50:00 EDT (1534391400) to daily summary in 'weewx.sdb'
Aug 15 23:50:24 raspberrypi weewx[1648]: cheetahgenerator: Generated 14
files for report StandardReport in 1.73 seconds
Aug 15 23:50:25 raspberrypi weewx[1648]: imagegenerator: Generated 12
images for StandardReport in 0.76 seconds
Aug 15 23:50:25 raspberrypi weewx[1648]: copygenerator: copied 0 files to
/var/www/html/weewx
Aug 15 23:55:29 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:55:00 EDT (1534391700) to database 'weewx.sdb'
Aug 15 23:55:29 raspberrypi weewx[1648]: manager: Added record 2018-08-15
23:55:00 EDT (1534391700) to daily summary in 'weewx.sdb'
* [[CWOP]]*
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = true
station = DW7229
# post_interval = 600
post_interval = 300
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
* [[Wunderground]]*
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = true
station = KNHHAMPS9
password = ********
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
*diff -b weewx.conf.dist weewx.conf*
11c11,12
< debug = 0
---
> debug = 1
29c30
< location = Hood River, Oregon
---
> location = "Rolling Meadows, Hampstead, NH"
32,33c33,34
< latitude = 45.686
< longitude = -121.566
---
> latitude = 42.868419
> longitude = -71.140946
37c38
< altitude = 700, foot # Choose 'foot' or 'meter' for unit
---
> altitude = 67, meter
41c42
< station_type = unspecified
---
> station_type = AcuRite
54a56,66
> [AcuRite]
> # This section is for AcuRite weather stations.
>
> # The station model, e.g., 'AcuRite 01025' or 'AcuRite 02032C'
> model = AcuRite 01035
>
> # The driver to use:
> driver = weewx.drivers.acurite
>
>
##############################################################################
>
70,71c82
< # To guard against parsing errors, put your password in quotes:
< password = "replace_me"
---
> password = replace_me
78,79c89,92
< enable = false
< station = replace_me
---
> enable = true
> station = DW7229
> # post_interval = 600
> post_interval = 300
91,93c104,105
< station = replace_me
< # To guard against parsing errors, put your password in quotes:
< password = "replace_me"
---
> station = KNHHAMPS9
> password = ********
102,103c114
< # To guard against parsing errors, put your password in quotes:
< password = "replace_me"
---
> password = replace_me
110,113c121,123
< enable = false
< station = replace_me
< # To guard against parsing errors, put your password in quotes:
< password = "replace_me"
---
> enable = true
> station = KNHHAMPS9
> password = ********
144a155,164
> [[[Units]]]
> [[[[Groups]]]]
> group_altitude = foot
> group_speed2 = mile_per_hour2
> group_pressure = inHg
> group_rain = inch
> group_rainrate = inch_per_hour
> group_temperature = degree_F
> group_degree_day = degree_F_day
> group_speed = mile_per_hour
153c173
< #password = replace with the ftp password; put in quotes to guard
against parsing errors.
---
> #password = replace with the ftp password
225a246,247
> pressure = pressure + 0.125
> # outHumidity = outHumidity * 1.04
236d257
< pressure = 24, 34.5, inHg
241a263
> pressure = 24, 34.5, inHg
326d347
< database_name = weewx.sdb
327a349
> database_name = weewx.sdb
331d352
< database_name = weewx
332a354
> database_name = weewx
353,354c375,376
< # The password for the user name. Put in quotes to guard against
parsing errors.
< password = "weewx"
---
> # The password for the user name
> password = ********
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
