Thank you for your answer! But I tought that the precip. rate should add up in precip. accum.? So every value in rate adds to accum. like 1mm+1,5mm+1,3mm+0,5mm = 4,3mm total so far and not 2mm total! That had been more like the old plastic rain gauge that level showed near the 5mm line yesterday. But I got the function of the accumulated wrong in that case?
Den torsdag 2 augusti 2018 kl. 10:30:26 UTC+2 skrev Andrew Milner: > > with your uploads every 30 minutes you will always have one additional > rainrate showing after the end of any rainfall, and there may be > circumstances when two periods show a rainrate after the end of rainfall as > the rainrate decays back down to zero. > > > > On Thursday, 2 August 2018 11:23:35 UTC+3, Andrew Milner wrote: >> >> I do not see anything wrong. >> >> at 1030 you had no rain >> in the period 1030-1100 1 mm fell so total = 1, and rainfall in previous >> hour = 1mm/hr >> in the period 1100-1130, 0.5mm fell, so total = 1.5 and rainfall in >> previous hour = 1.5mm/hr >> in the period 1130 - 1200, 0.5mm fell, so total = 2.0, rainfall in >> previous hr = 1 so am not sure where the 1.3 came from!!! - ask WU >> in the period 1200 - 1230 , 0 rain fell, so total still = 2.0, rainfall >> in previous hr = 0.5 >> in the period 1230 - 1300, 0 rain fell, so total still = 2, rainfall in >> previous hr = 0 >> and total rainfall will stay at 2 until next rain falls, and reset at >> midnight >> >> >> >> On Thursday, 2 August 2018 11:14:54 UTC+3, Micael Fredriksson wrote: >>> >>> Hi! >>> >>> Yes it shows the same in the table on a web browser. >>> I attached a pic of that. >>> >>> Any clue why this happens? And is there a solution? >>> >>> Thanks! >>> >>> Den torsdag 2 augusti 2018 kl. 08:53:59 UTC+2 skrev Micael Fredriksson: >>>> >>>> Hi! >>>> >>>> My wunderstation table shows rain rate values and accumulated values >>>> but they don't match up. Even if the rain rate column shows several hours >>>> of rain, the accumulated seems to stop counting after reaching 2mm. >>>> >>>> Any idea how to fix this? >>>> >>>> Using weewx 3.8.0 on raspberry pi3 >>>> With wh1080 weather station. >>>> >>>> I've seen some posts in forums that you shouldn't mind the rain rate, >>>> but I would like to see correct accumulated rain in the app. >>>> >>>> Any advise? >>>> >>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
