Hi, I'm happy to hear you got it working, I update my github with you modification; https://github.com/fcauwe/weewx
I noticed that the barometer only opdates every 15 minutes, so I have modified the "archive_interval" to "900", now I always have barometer data on the WOW site. François Timo Helkiö schreef op wo 14-03-2018 om 02:35 [-0700]: > > I did get my WMR89 this monday for replacement for 5 years old WMR88, > which starts to shown some defunction features. > oon appeared that direct replacement was not possible. I found this > fcauwe's driver and instruction to modify cp210x-driver. I changed > cp210x source code from https://www.silabs.com/products/development-t > ools/software/usb-to-uart-bridge-vcp-drivers to recognize WMR89, > compiled and installed it. Now loading module creates /dev/ttyUSB0. > In weewx.conf I added this: > > [WMR89] > # This section is for the Oregon Scientific WMR100 > > # The driver to use > #driver = user.wmr89 > driver = weewx.drivers.wmr89 > > # The station model, e.g., WMR100, WMR100N, WMRS200 > model = WMR89 > > type = serial > product_id = 0xca0a > port = /dev/ttyUSB0 > > It did not work before I added "type=serial" > Driver should use these parameters as default. I found this "type"- > parameter by reading driver code. > After these, driver worked, but I have two extra temperature > sensors. > Temperature packet in driver is like this: > > if (packet[2].encode('hex')=='00'): > _record = { > 'humidity_in': hum, > 'temperature_in': float(temp), > 'dewpoint_in': dew, > 'dateTime': int(time.time() + 0.5), > 'usUnits': weewx.METRIC > } > elif (packet[2].encode('hex')=='01'): > _record = { > 'humidity_out': hum, > 'temperature_out': float(temp), > 'dewpoint_out': dew, > 'dateTime': int(time.time() + 0.5), > 'usUnits': weewx.METRIC > } > > I did add this: > elif (packet[2].encode('hex')=='02'): > _record = { > 'humidity_1': hum, > 'temperature_1': float(temp), > 'dewpoint_1': dew, > 'dateTime': int(time.time() + 0.5), > 'usUnits': weewx.METRIC > } > elif (packet[2].encode('hex')=='03'): > _record = { > 'humidity_2': hum, > 'temperature_2': float(temp), > 'dewpoint_2': dew, > 'dateTime': int(time.time() + 0.5), > 'usUnits': weewx.METRIC > } > > Now everything is working, except barometer data is quite often > missing. > > Timo > > -- > You received this message because you are subscribed to a topic in > the Google Groups "weewx-user" group. > To unsubscribe from this topic, visit https://groups.google.com/d/top > ic/weewx-user/FxNx6am2MgM/unsubscribe. > To unsubscribe from this group and all its topics, send an email to w > [email protected]. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
