Good to hear that both systems are now doing the same thing, and working as you expect - in that respect it is progress!! If you try with the cumulus realtime extension again - just change one thing at a time to avoid confusion!! If you change many things at once it becomes very very difficult to pinpoint a problem.
On Tuesday, 30 January 2018 14:29:08 UTC+2, Yngve Andersson wrote: > *Hello Andrew and others!* > > *I have now found the problem of strange views of, among other things, air > pressure. After your point of view of the importance of the inequality of > non functioning and functioning systems with the weewx.conf and skin.conf > files, I have found aberration and a significant error in weewx.conf. I do > not know if [CumulusRealTime] is significant and can result in problems?* > > > *[Engine]* > > * [[Services]]* > > *Raspberry Pi* > > *process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, > weewx.engine.StdQC, weewx.wxservices.StdWXCalculate**, * > *user.crt.CumulusRealTime* > > > *mint 18* > > *process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate, > weewx.engine.StdQC, weewx.wxservices.StdWXCalculate* > > > *Raspberry Pi* > > *restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, > user.wcloud.WeatherCloud** # user.wcloud.WeatherCloud* > > > *mint 18* > > *restful_services = weewx.restx.StdStationRegistry, > weewx.restx.StdWunderground, weewx.restx.StdPWSweather, > weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS, > user.wcloud.WeatherCloud* > > > *Raspberry Pi* > > *[CumulusRealTime]* > > * f**ilename = /var/tmp/realtime.txt* > > > *For the skin.conf file in RaspberryPi, I had changed the display to > "meter, C, mm ,, m/s" under* > > *[Units]* > > * [[Groups]]* > > *This may not be necessary if they are enrolled in weewx.conf? So now, > skin.conf is also switched to the original version.* > > > *The configurations of the files (in original) now work with RaspberryPi > as well as for mint18. **RaspberryPi has now worked since yesterday 8:00 > pm* > > > *I do not know exactly how I managed to accomplish this mismatch and this > problem, but probably it's a result of my somewhat ignorant way of trying > to fix something that went wrong. I think that was when I tried to change > the display of the pressure to mbar.* > > > *I am very grateful for all your help and regret that I have asked for > something that really should not be a problem, if you are careful about > what you do.* > > > *Thank you so much to all of you! Andrew, Cameron, gjr80, mwall, sinantc34* > > *Yngve* > > Den måndag 29 januari 2018 kl. 20:08:07 UTC+2 skrev Andrew Milner: >> >> If you are trying to compare why weewx works ok on one system and not the >> other then I suggest you make sure that weewx.conf and skin.conf files are >> the same. If there are differences then I have to ask you why they are >> different. You cannot compare two systems if the conf files are >> different!!!! The only differences should be related to paths to files - >> in all other respects they should be identical. >> >> What are the differences?? >> >> >> >> On Monday, 29 January 2018 19:34:57 UTC+2, Yngve Andersson wrote: >> >>> Hello Andrew! >>> There is a certain difference of weewx.conf between Raspberry and >>> Mint18.3! I do not know if the difference is important? >>> I've been trying to make changes and additions that I found to try to >>> fix the problem. There have been many tests over and over again when I >>> signed in and tested. So, therefore, there has been a difference in the >>> files. You'll see if the difference is significant? >>> >>> I will copy "Raspberry, weewx.conf" and run it in Mint18.3 >>> >>> Attaches both files weewx.conf >>> >>> Thank you, for your dedication Yngve >>> >>> Den måndag 29 januari 2018 kl. 17:57:26 UTC+2 skrev Andrew Milner: >>>> >>>> have you checked that weewx.conf is IDENTICAL on both systems? >>>> >>>> >>>> >>>> On Monday, 29 January 2018 17:43:58 UTC+2, Yngve Andersson wrote: >>>> >>>>> Hi Cameron! >>>>> The station WMR300 is standard, *no extra* sensors! >>>>> I joined WMR300 yesterday 28 Jan 3:15 pm to my desktop computer Mint >>>>> 18.3 and seems to have worked OK! Joined RaspberryPi today 29 Jan 4:30 pm >>>>> and now with no air pressure. >>>>> So it is obvious that my RaspberyPi does not fully work out! >>>>> Thanks! Yngve >>>>> >>>>> Den måndag 29 januari 2018 kl. 16:08:53 UTC+2 skrev Cameron D: >>>>>> >>>>>> They are quite odd readings.. Do you really have cloudbase and solar >>>>>> radiation meters? >>>>>> If not then maybe the mappings have gone awry? >>>>>> Matthew will have a much better idea than me. >>>>>> >>>>>> Cameron. >>>>>> >>>>>> >>>>>> On Monday, 29 January 2018 19:41:53 UTC+10, Yngve Andersson wrote: >>>>>>> >>>>>>> Hey! >>>>>>> I have logged the following information from Raspberry and WMR300 >>>>>>> with command: >>>>>>> *sudo PYTHONPATH=/usr/share/weewx python >>>>>>> /usr/share/weewx/weewx/drivers/wmr300.py --get-current> >>>>>>> /var/tmp/wmr300-driver-output.txt* >>>>>>> and >>>>>>> *sudo /usr/share/weewx/weewxd /etc/weewx/weewx.conf> >>>>>>> /var/tmp/wmr300-weewxd output.* >>>>>>> *Attach these:* >>>>>>> It's not just a problem with information going to wunderground, etc. >>>>>>> ..., it's also the presentation on the local host (Raspberry)! >>>>>>> / Yngve >>>>>>> >>>>>>> Den måndag 29 januari 2018 kl. 00:45:40 UTC+2 skrev >>>>>>> [email protected]: >>>>>>>> >>>>>>>> Hi yngve, can you make rapidfire true for me? I wanna see how it >>>>>>>> will send data to wunderground. Thanks >>>>>>> >>>>>>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
