Hey Gary,
The config file is below. I didn't think about it yesterday, but I am
using the history generator script (found here
<https://github.com/brewster76/fuzzy-archer/blob/master/bin/user/historygenerator.py>).
I have modified the schema to include a few extra data sources, but if i
understand correctly, I have not tried to add any accumulators. What would
that code like for the initialization you mention? (Other than = None)?
Could I add a debug line somewhere to get a little more information out of
the system to determine more precisely what accumulation is incorrect? As
a side note, since it started running again, it has run without hiccup for
a day, with no changes at all.
Thanks again!
Datasources:
schema_with_esp = schemas.wview.schema + [('DoorOpen1', 'REAL'), (
'DoorClosed1', 'REAL'), ('DoorOpen2', 'REAL'), ('DoorClosed2', 'REAL'), (
'IrrigationFlow', 'REAL'), ('IrrigationPressure', 'REAL'),('esp1Signal',
'REAL'), ('esp2Signal', 'REAL'), ('esp3Signal', 'REAL'), ('esp3LIPOVoltage'
, 'REAL'), ('esp3LIPOCurrent', 'REAL'), ('esp3SolarVoltage', 'REAL'), (
'esp3SolarCurrent', 'REAL'), ('esp3OutputVoltage', 'REAL'), (
'esp3OutputCurrent', 'REAL'), ('extraHumid3', 'REAL'), ('esp4Signal', 'REAL'
), ('esp4LIPOVoltage', 'REAL')]
I also have added these to, and created some simple groups for these,
following the documentation, which works as expected.
Weewx.conf (Edited for brevity)
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.7.1
##############################################################################
# This section is for information about the additional ESP8266 Sensors
that are in use.
[ESP8266]
[[http://1.2.3.4]]
mac = 5C:CF:7F:02:0C:17
Temp = extraTemp1
Humid = extraHumid1
doorOpen = DoorOpen1
doorClosed = DoorClosed1
Signal = esp1Signal
[[http://1.2.3.4]]
mac = 5C:CF:7F:07:5B:90
Temp = extraTemp2
Humid = extraHumid2
doorOpen = DoorOpen2
doorClosed = DoorClosed2
Signal = esp2Signal
# [[http://1.2.3.4]]
# mac = 30:AE:A4:30:93:54
# Temp = extraTemp3
# Humid = extraHumid3
# Signal = esp4Signal
# Voltage = esp4LIPOVoltage
# [[http://1.2.3.4]]
# mac = 5C:CF:7F:12:17:97
# Flow = IrrigationFlow
# Pressure = IrrigationPressure
# Signal = esp3Signal
# LIPO_Voltage = esp3LIPOVoltage
# LIPO_Current = esp3LIPOCurrent
# Solar_Voltage = esp3SolarVoltage
# Solar_Current = esp3SolarCurrent
# Output_Voltage = esp3OutputVoltage
# Output_Current = esp3OutputCurrent
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = y
# Latitude and longitude in decimal degrees
latitude =
longitude =
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 1234, foot
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be
used.
station_type = Vantage
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 6
##############################################################################
[Vantage]
# This section is for the Davis Vantage series of weather stations.
# Connection type: serial or ethernet
# serial (the classic VantagePro)
# ethernet (the WeatherLinkIP)
type = ethernet
# If the connection type is serial, a port must be specified:
# Debian, Ubuntu, Redhat, Fedora, and SuSE:
# /dev/ttyUSB0 is a common USB port name
# /dev/ttyS0 is a common serial port name
# BSD:
# /dev/cuaU0 is a common serial port name
port = /dev/ttyUSB0
# If the connection type is ethernet, an IP Address/hostname is
required:
host = 1.2.3.4
######################################################
# The rest of this section rarely needs any attention.
# You can safely leave it "as is."
######################################################
# Serial baud rate (usually 19200)
baudrate = 19200
# TCP port (when using the WeatherLinkIP)
tcp_port = 23
# TCP send delay (when using the WeatherLinkIP):
#tcp_send_delay = 0.5
tcp_send_delay = 1
# The id of your ISS station (usually 1). If you use a wind meter
connected
# to a anemometer transmitter kit, use its id
iss_id = 1
# How long to wait for a response from the station before giving up (in
# seconds; must be greater than 2)
timeout = 4
# How long to wait before trying again (in seconds)
wait_before_retry = 1.2
# How many times to try before giving up:
max_tries = 4
# The driver to use:
driver = weewx.drivers.vantage
##############################################################################
# This section is for uploading data to Internet sites
##NOTHING HERE ##
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /var/www/html/weewx
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and
other
# customizations. Many of those changes can be made here by
overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Sofaskin
[[[Units]]]
[[[[Groups]]]]
group_altitude = foot
group_speed2 = mile_per_hour2
group_pressure = inHg
group_rain = inch
group_rainrate = inch_per_hour
group_temperature = degree_F
group_degree_day = degree_F_day
group_speed = mile_per_hour
#[[cmon]]
# HTML_ROOT = /var/www/html/weewx/cmon
# skin = cmon
[[FTP]]
##NOTHING HERE ##
[[RSYNC]]
##NOTHING HERE ##
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of
units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = US # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 26, 32.5, inHg
outTemp = -40, 120, degree_F
inTemp = 10, 120, degree_F
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, mile_per_hour
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible
values are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = prefer_hardware
barometer = prefer_hardware
altimeter = prefer_hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = prefer_hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive
interval
# will be downloaded from the station. Otherwise, specify it (in
seconds).
archive_interval = 300
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = software
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_sqlite
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = user.esp8266.schema_with_esp
[[cmon_binding]]
manager = weewx.manager.DaySummaryManager
schema = user.cmon.schema
table_name = archive
database = cmon_sqlite
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
[[cmon_sqlite]]
database_name = cmon.sdb
database_type = SQLite
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = user.esp8266.add_esp_records,
process_services = weewx.engine.StdConvert,
weewx.engine.StdCalibrate, weewx.engine.StdQC,
weewx.wxservices.StdWXCalculate, user.cmon.ComputerMonitor
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather,
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
# Options for extension 'cmon'
[ComputerMonitor]
data_binding = cmon_binding
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
