Ins't eaysweatherIP also for sending data? http://www.aercusinstruments.com/content/downloads/EasyWeatherIP%20Setup%281022%29.zip
Dne ponedeljek, 11. september 2017 14.44.05 UTC+2 je oseba Damjan Hajsek napisala: > > OK, now I see. > Weather stations sends data, like on www.wunderground.com > So it is possible to send data also to my web server and than setup weewx > to read that data? > > > Dne ponedeljek, 11. september 2017 13.57.32 UTC+2 je oseba Andrew Milner > napisala: >> >> No >> >> weewx does not receive data - it reads data. It is not 'listening' - it >> is controlling. >> >> If you can get a data file onto the weewx machine then weewx can be made >> to read the file instead of a weather station - but the simple answer to >> your question is no - unless you write a lot of code in which case anything >> is possible!!. >> >> Most people in your situation would use an old pc or raspberry pi to run >> weewx and get the data from the weather station, and then use weewx's ftp >> and rsync capabilities to a) generate web pages b) ftp web pages to a >> webserver c) use rsync to take backups of weewx database to offsite server >> and would have a webserver running elsewhere to serve the weewx generated >> web pages. >> >> >> >> On 11 September 2017 at 14:48, Damjan Hajsek <[email protected]> wrote: >> >>> Is it not possible to send data from weather station to weewx? Like >>> weather station sends data to www.wunderground.com? >>> >>> Dne ponedeljek, 11. september 2017 12.28.50 UTC+2 je oseba Andrew Milner >>> napisala: >>>> >>>> You need to have weewx installed on a server or pc on the same local >>>> network as the weather station for the driver to work. Yes, the driver >>>> talks directly to the station over wifi and from what I can read it >>>> identifies the ip address of the station by broadcasting on the local >>>> network. >>>> >>>> Weewx can then upload/transfer vie ftp or rsync the generated pages to >>>> the offsite server which you have got in another location. Weewx only >>>> creates the pages and stores the database - it does not do the webserver >>>> aspects of a web site. >>>> >>>> >>>> >>>> On Monday, 11 September 2017 11:57:54 UTC+3, Damjan Hajsek wrote: >>>> >>>>> As far as I read about this HP1000 driver it connect to weather >>>>> station. >>>>> But my weather station is at home and server is on other location. I >>>>> thought weather station sends data to my server where weewx is installed >>>>> and this shows up on my weewx web pages. >>>>> >>>>> Dne ponedeljek, 11. september 2017 09.01.18 UTC+2 je oseba Damjan >>>>> Hajsek napisala: >>>>>> >>>>>> I checked log and it is full of this >>>>>> >>>>>> weewx[26283]: HP1000: Timed out too many times >>>>>> >>>>>> >>>>>> Sep 11 08:28:10 webserver weewx[26279]: engine: Initializing weewx >>>>>> version 3.7.1 >>>>>> Sep 11 08:28:10 webserver weewx[26279]: engine: Using Python 2.7.5 >>>>>> (default, Nov 6 2016, 00:28:07) #012[GCC 4.8.5 20150623 (Red Hat >>>>>> 4.8.5-11)] >>>>>> Sep 11 08:28:11 webserver weewx[26279]: engine: Platform >>>>>> Linux-3.10.0-514.26.1.el7.x86_64-x86_64-with-centos-7.3.1611-Core >>>>>> Sep 11 08:28:11 webserver weewx[26279]: engine: Locale is 'sl_SI.UTF-8' >>>>>> Sep 11 08:28:11 webserver weewx[26279]: engine: pid file is >>>>>> /var/run/weewx.pid >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Using configuration file >>>>>> /etc/weewx/weewx.conf >>>>>> Sep 11 08:28:11 webserver weewx: Starting weewx: [ V redu ] >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Loading station type >>>>>> HP1000 (user.HP1000) >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: HP1000 Starting >>>>>> Sep 11 08:28:11 webserver systemd: Started SYSV: start and stop the >>>>>> weewx weather system. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Using "netifaces" to >>>>>> determine broadcast mask >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Address Mask = >>>>>> XXX.XXX.255.255 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Retry count = 5.000000 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Socket timeout = 5.000000 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Loop delay = 15.000000 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Retry Wait = 5.000000 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: HP1000: Max Retry = 3.000000 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: StdConvert target unit >>>>>> is 0x1 >>>>>> Sep 11 08:28:11 webserver weewx[26283]: wxcalculate: The following >>>>>> values will be calculated: barometer=prefer_hardware, >>>>>> windchill=prefer_hardware, dewpoint=prefer_hardware, >>>>>> appTemp=prefer_hardware, rainRate=prefer_hardware, >>>>>> windrun=prefer_hardware, heatindex=prefer_hardware, >>>>>> maxSolarRad=prefer_hardware, humidex=prefer_hardware, >>>>>> pressure=prefer_hardware, inDewpoint=prefer_hardware, >>>>>> ET=prefer_hardware, altimeter=prefer_hardware, cloudbase=prefer_hardware >>>>>> Sep 11 08:28:11 webserver weewx[26283]: wxcalculate: The following >>>>>> algorithms will be used for calculations: altimeter=aaNOAA, >>>>>> maxSolarRad=RS >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Archive will use data >>>>>> binding wx_binding >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Record generation will >>>>>> be attempted in 'software' >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Using archive interval >>>>>> of 300 seconds (specified in weewx configuration) >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Using binding >>>>>> 'wx_binding' to database 'weewx.sdb' >>>>>> Sep 11 08:28:11 webserver weewx[26283]: manager: Starting backfill of >>>>>> daily summaries >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: StationRegistry: >>>>>> Registration not requested. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: Wunderground: Posting not >>>>>> enabled. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: PWSweather: Posting not >>>>>> enabled. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: CWOP: Posting not enabled. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: WOW: Posting not enabled. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: restx: AWEKAS: Posting not >>>>>> enabled. >>>>>> Sep 11 08:28:11 webserver weewx[26283]: engine: Starting up weewx >>>>>> version 3.7.1 >>>>>> Sep 11 08:28:36 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> Sep 11 08:29:01 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> Sep 11 08:29:26 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> Sep 11 08:29:51 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> Sep 11 08:32:21 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> Sep 11 08:32:46 webserver weewx[26283]: HP1000: Timed out too many times >>>>>> >>>>>> >>>>>> >>>>>> Dne nedelja, 10. september 2017 23.44.27 UTC+2 je oseba mwall >>>>>> napisala: >>>>>>> >>>>>>> http://weewx.com/docs/usersguide.htm#monitoring >>>>>>> >>>>>>> m >>>>>>> >>>>>> -- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "weewx-user" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/weewx-user/im5Iq0rzsXM/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
