Hello,
I recently updatet to 3.7.1. Since then I had some troubles with WMR200
driver related to Interval column in MySQL. I downloaded latest WMR200
driver ("3.3.2") from github and finally it works just fine for few days.
But from this midnight weewx doesn't work. If you have any sugestions how
to fix this problem or want some other logs/informations I will answer that
as soon as possible.
Thanks
I am adding some info from /var/log/syslog with debug=1
May 14 16:20:57 pi weewx[2512]: engine: Initializing weewx version 3.7.1
May 14 16:20:57 pi weewx[2512]: engine: Using Python 2.7.3 (default, Jun 22
2016, 03:14:32) #012[GCC 4.6.3]
May 14 16:20:58 pi weewx[2512]: engine: Platform
Linux-3.18.0-trunk-rpi-armv6l-with-debian-7.11
May 14 16:20:58 pi weewx[2512]: engine: Locale is
'LC_CTYPE=en_US.UTF-8;LC_NUMERIC=sk_SK.UTF-8;LC_TIME=sk_SK.UTF-8;LC_COLLATE=en_US.UTF-8;LC_MONETARY=sk_SK.UTF-8;LC_MESSAGES=en_US.UTF-8;LC_PAPER=sk_SK.UTF-8;LC_NAME=sk_SK.UTF-8;LC_ADDRESS=sk_SK.UTF-8;LC_TELEPHONE=sk_SK.UTF-8;LC_MEASUREMENT=sk_SK.UTF-8;LC_IDENTIFICATION=sk_SK.UTF-8'
May 14 16:20:58 pi weewx[2512]: engine: pid file is /var/run/weewx.pid
May 14 16:20:58 pi weewx[2516]: engine: Using configuration file
/etc/weewx/weewx.conf
May 14 16:20:58 pi weewx[2516]: engine: debug is 1
May 14 16:20:58 pi weewx[2516]: engine: Initializing engine
May 14 16:20:58 pi weewx[2516]: engine: Loading station type WMR200
(weewx.drivers.wmr200)
May 14 16:20:58 pi weewx[2516]: wmr200: MainThread: I driver version is
3.3.1
May 14 16:20:58 pi weewx[2516]: wmr200: MainThread: I sensor map is
{'outTempBatteryStatus': 'battery_status_out', 'outHumidity': 'humidity_1',
'rainRate': 'rain_rate', 'heatindex4': 'heatindex_5', 'rainTotal':
'rain_total', 'rainBatteryStatus': 'battery_status_rain', 'heatindex6':
'heatindex_7', 'extraTemp5': 'temperature_6', 'uvFault': 'uv_fault',
'extraTemp2': 'temperature_3', 'heatindex': 'heatindex_1', 'extraTemp3':
'temperature_4', 'rain24': 'rain_24', 'inHeatindex': 'heatindex_0',
'inTemp': 'temperature_0', 'extraTemp1': 'temperature_2', 'hourRain':
'rain_hour', 'windFault': 'wind_fault', 'windchill': 'windchill',
'clockUnsynchronized': 'clock_unsynchronized', 'extraTemp7':
'temperature_8', 'rain': 'rain', 'forecastIcon': 'forecast_icon',
'pressure': 'pressure', 'extraHumid4': 'humidity_5', 'extraHumid5':
'humidity_6', 'extraHumid2': 'humidity_3', 'extraHumid3': 'humidity_4',
'extraHumid1': 'humidity_2', 'extraTemp6': 'temperature_7', 'heatindex5':
'heatindex_6', 'extraTemp4': 'temperature_5', 'heatindex7': 'heatindex_8',
'altimeter': 'altimeter', 'heatindex1': 'heatindex_2', 'heatindex2':
'heatindex_3', 'heatindex3': 'heatindex_4', 'extraHumid6': 'humidity_7',
'extraHumid7': 'humidity_8', 'windBatteryStatus': 'battery_status_wind',
'UV': 'uv', 'rainFault': 'rain_fault', 'windDir': 'wind_dir', 'outTemp':
'temperature_1', 'windSpeed': 'wind_speed', 'inHumidity': 'humidity_0',
'outTempFault': 'out_fault', 'windGust': 'wind_gust', 'uvBatteryStatus':
'battery_status_uv'}
May 14 16:20:58 pi weewx[2516]: wmr200: MainThread: I Created watchdog
thread to poke for live data every 30 seconds
May 14 16:20:58 pi weewx[2516]: wmr200: MainThread: I Created USB polling
thread to read block on device
May 14 16:20:58 pi weewx[2516]: wmr200: Thread-2: I USB polling device
thread for live data launched
May 14 16:20:58 pi weewx[2516]: wmr200: MainThread: I Reset console device
May 14 16:20:58 pi weewx[2516]: wmr200: Thread-2: I USB polling device
thread signaled to start
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Configuration setup
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Log sensor faults:
True
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Using PC Time: True
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Erase archive data:
False
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Archive interval:
300
May 14 16:20:59 pi weewx[2516]: wmr200: MainThread: D Archive threshold:
604800
May 14 16:20:59 pi weewx[2516]: engine: Loading service
weewx.engine.StdTimeSynch
May 14 16:20:59 pi weewx[2516]: wmr200: Thread-1: I Started watchdog thread
live data
May 14 16:20:59 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdTimeSynch
May 14 16:20:59 pi weewx[2516]: engine: Loading service
weewx.engine.StdConvert
May 14 16:20:59 pi weewx[2516]: engine: StdConvert target unit is 0x10
May 14 16:20:59 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdConvert
May 14 16:20:59 pi weewx[2516]: engine: Loading service
weewx.engine.StdCalibrate
May 14 16:20:59 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdCalibrate
May 14 16:20:59 pi weewx[2516]: engine: Loading service weewx.engine.StdQC
May 14 16:20:59 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdQC
May 14 16:20:59 pi weewx[2516]: engine: Loading service
weewx.wxservices.StdWXCalculate
May 14 16:20:59 pi weewx[2516]: wxcalculate: The following values will be
calculated: barometer=prefer_hardware, windchill=prefer_hardware,
dewpoint=prefer_hardware, appTemp=prefer_hardware, rainRate=hard
ware, windrun=prefer_hardware, heatindex=prefer_hardware,
maxSolarRad=prefer_hardware, humidex=prefer_hardware, pressure=hardware,
inDewpoint=prefer_hardware, ET=prefer_hardware, altimeter=hardware, cloud
base=prefer_hardware
May 14 16:20:59 pi weewx[2516]: wxcalculate: The following algorithms will
be used for calculations: altimeter=aaNOAA, maxSolarRad=RS
May 14 16:20:59 pi weewx[2516]: engine: Finished loading service
weewx.wxservices.StdWXCalculate
May 14 16:20:59 pi weewx[2516]: engine: Loading service
weewx.engine.StdArchive
May 14 16:20:59 pi weewx[2516]: engine: Archive will use data binding
wx_binding
May 14 16:20:59 pi weewx[2516]: engine: Record generation will be attempted
in 'hardware'
May 14 16:20:59 pi weewx[2516]: engine: Using archive interval of 300
seconds (specified by hardware)
May 14 16:20:59 pi weewx[2516]: engine: Use LOOP data in hi/low
calculations: 1
May 14 16:21:00 pi weewx[2516]: manager: Daily summary version is 2.0
May 14 16:21:00 pi weewx[2516]: engine: Using binding 'wx_binding' to
database 'weewx'
May 14 16:21:00 pi weewx[2516]: manager: Starting backfill of daily
summaries
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdArchive
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.restx.StdStationRegistry
May 14 16:21:00 pi weewx[2516]: restx: StationRegistry: Station will be
registered.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdStationRegistry
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.restx.StdWunderground
May 14 16:21:00 pi weewx[2516]: restx: Wunderground: Posting not enabled.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdWunderground
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.restx.StdPWSweather
May 14 16:21:00 pi weewx[2516]: restx: PWSweather: Posting not enabled.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdPWSweather
May 14 16:21:00 pi weewx[2516]: engine: Loading service weewx.restx.StdCWOP
May 14 16:21:00 pi weewx[2516]: restx: CWOP: Posting not enabled.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdCWOP
May 14 16:21:00 pi weewx[2516]: engine: Loading service weewx.restx.StdWOW
May 14 16:21:00 pi weewx[2516]: restx: WOW: Posting not enabled.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdWOW
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.restx.StdAWEKAS
May 14 16:21:00 pi weewx[2516]: restx: AWEKAS: Posting not enabled.
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.restx.StdAWEKAS
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.engine.StdPrint
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdPrint
May 14 16:21:00 pi weewx[2516]: engine: Loading service
weewx.engine.StdReport
May 14 16:21:00 pi weewx[2516]: engine: Finished loading service
weewx.engine.StdReport
May 14 16:21:00 pi weewx[2516]: engine: Starting up weewx version 3.7.1
May 14 16:21:00 pi weewx[2516]: engine: Station does not support reading
the time
May 14 16:21:00 pi weewx[2516]: wmr200: MainThread: D genStartup() phase
getting archive packets since 2017-05-14 00:00:00 CEST (1494712800)
May 14 16:21:01 pi weewx[2516]: wmr200: MainThread: I Time drift between
host and console in seconds:1
May 14 16:21:01 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:1 live_queue_len:1
May 14 16:21:01 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:2 live_queue_len:2
May 14 16:21:10 pi weewx[2516]: wmr200: MainThread: D Initializing
Rain.rain_total_last to 3.91
May 14 16:21:10 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:3 live_queue_len:3
May 14 16:21:11 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:4 live_queue_len:4
May 14 16:21:15 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:5 live_queue_len:5
May 14 16:21:21 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:6 live_queue_len:6
May 14 16:21:23 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:7 live_queue_len:7
May 14 16:21:28 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:8 live_queue_len:8
May 14 16:21:28 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:9 live_queue_len:9
May 14 16:21:29 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:10 live_queue_len:10
May 14 16:21:31 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:11 live_queue_len:11
May 14 16:21:35 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:12 live_queue_len:12
May 14 16:21:40 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:13 live_queue_len:13
May 14 16:21:43 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:14 live_queue_len:14
May 14 16:21:48 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:15 live_queue_len:15
May 14 16:21:50 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:16 live_queue_len:16
May 14 16:21:56 pi weewx[2516]: wmr200: MainThread: D adjust_rain
rain_total:3.91 Rain.rain_total_last:3.91 rain_interval:0.00
May 14 16:21:56 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:17 live_queue_len:17
May 14 16:21:57 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:18 live_queue_len:18
May 14 16:21:59 pi weewx[2516]: wmr200: MainThread: W Wind sensor: Battery
low
May 14 16:21:59 pi weewx[2516]: wmr200: MainThread: W Rain sensor: Battery
low
May 14 16:21:59 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:19 live_queue_len:19
May 14 16:22:00 pi weewx[2516]: wmr200: MainThread: D Acknowledged
control packet rx:1
May 14 16:22:00 pi weewx[2516]: wmr200: MainThread: D Queuing live packet
rx:20 live_queue_len:20
May 14 16:22:03 pi weewx[2516]: wmr200: MainThread: D Queuing archive
packet rx:1 archive_queue_len:1
May 14 16:22:04 pi weewx[2516]: wmr200: MainThread: I genStartup() Still
receiving archive packets cnt:0 len:1
May 14 16:22:04 pi weewx[2516]: wmr200: MainThread: I Using pc time
adjusting archive record time by 1 sec 2017-05-14 00:18:00 CEST
(1494713880) => 2017-05-14 00:18:01 CEST (1494713881)
May 14 16:22:04 pi weewx[2516]: wmr200: MainThread: D Initializing
Archive Data.rain_total_last to 3.91
May 14 16:22:04 pi weewx[2516]: wmr200: MainThread: D genStartup() Yielding
received archive record cnt:1 after requested timestamp:1494712800
pkt_interval:1081 pkt:2017-05-14 00:18:01 CEST (1494713881)
May 14 16:22:05 pi weewx[2516]: manager: Added record 2017-05-14 00:18:01
CEST (1494713881) to database 'weewx'
May 14 16:22:05 pi weewx[2516]: engine: Main loop exiting. Shutting engine
down.
May 14 16:22:05 pi weewx[2516]: restx: Shut down StationRegistry thread.
May 14 16:22:05 pi weewx[2516]: wmr200: Thread-2: I USB polling device
thread exiting
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I USB polling thread
expired
May 14 16:22:05 pi weewx[2516]: wmr200: Thread-1: I Watchdog received
shutdown
May 14 16:22:05 pi weewx[2516]: wmr200: Thread-1: I Watchdog thread exiting
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I Watchdog thread
expired
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I Received packet count
live:20 archive:1 control:1
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I Received bytes:2960
sent bytes:56
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I Packet archive queue
len:0 live queue len:20
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: W Exiting with packets
still in live queue cnt:20
May 14 16:22:05 pi weewx[2516]: wmr200: MainThread: I Driver gracefully
exiting
May 14 16:22:05 pi weewx[2516]: engine: Caught unrecoverable exception in
engine:
May 14 16:22:05 pi weewx[2516]: **** 'interval'
May 14 16:22:05 pi weewx[2516]: **** Traceback (most recent call last):
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 871, in main
May 14 16:22:05 pi weewx[2516]: **** engine.run()
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 159, in run
May 14 16:22:05 pi weewx[2516]: ****
self.dispatchEvent(weewx.Event(weewx.STARTUP))
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 223, in dispatchEvent
May 14 16:22:05 pi weewx[2516]: **** callback(event)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 508, in startup
May 14 16:22:05 pi weewx[2516]: ****
self._catchup(self.engine.console.genStartupRecords)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 622, in _catchup
May 14 16:22:05 pi weewx[2516]: **** origin='hardware'))
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 223, in dispatchEvent
May 14 16:22:05 pi weewx[2516]: **** callback(event)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/engine.py", line 588, in new_archive_record
May 14 16:22:05 pi weewx[2516]: ****
dbmanager.addRecord(event.record, accumulator=self.old_accumulator)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/manager.py", line 245, in addRecord
May 14 16:22:05 pi weewx[2516]: **** self._addSingleRecord(record,
cursor, log_level)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/manager.py", line 1179, in _addSingleRecord
May 14 16:22:05 pi weewx[2516]: **** _weight =
self._calc_weight(record)
May 14 16:22:05 pi weewx[2516]: **** File
"/usr/share/weewx/weewx/manager.py", line 1543, in _calc_weight
May 14 16:22:05 pi weewx[2516]: **** weight = 60.0 *
record['interval'] if self.version >= '2.0' else 1.0
May 14 16:22:05 pi weewx[2516]: **** KeyError: 'interval'
May 14 16:22:05 pi weewx[2516]: **** Exiting.
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
# WEEWX CONFIGURATION FILE
#
# Copyright (c) 2009-2015 Tom Keffer <[email protected]>
# See the file LICENSE.txt for your rights.
##############################################################################
# This section is for general configuration information.
# Set to 1 for extra debug info, otherwise comment it out or set to zero
debug = 1
# Root directory of the weewx data file hierarchy for this station
WEEWX_ROOT = /
# How long to wait before timing out a socket (FTP, HTTP) connection
socket_timeout = 20
# Do not modify this. It is used when installing and updating weewx.
version = 3.7.1
##############################################################################
# This section is for information about the station.
[Station]
# Description of the station location
location = "Rajecké Teplice, Slovakia"
# Latitude and longitude in decimal degrees
latitude = 49.127735
longitude = 18.682635
# Altitude of the station, with unit it is in. This is downloaded from
# from the station if the hardware supports it.
altitude = 420, meter
# Set to type of station hardware. There must be a corresponding stanza
# in this file with a 'driver' parameter indicating the driver to be used.
station_type = WMR200
# If you have a website, you may specify an URL
#station_url = http://www.example.com
# The start of the rain year (1=January; 10=October, etc.). This is
# downloaded from the station if the hardware supports it.
rain_year_start = 1
# Start of week (0=Monday, 6=Sunday)
week_start = 0
station_url = http://meteorajecketeplice.ddns.net/
##############################################################################
[WMR200]
model = WMR200
archive_interval = 300
driver = weewx.drivers.wmr200
##############################################################################
# This section is for uploading data to Internet sites
[StdRESTful]
[[StationRegistry]]
# To register this weather station with weewx, set this to true
register_this_station = true
[[AWEKAS]]
# This section is for configuring posts to AWEKAS.
# If you wish to do this, set the option 'enable' to true,
# and specify a username and password.
enable = false
username = replace_me
password = replace_me
[[CWOP]]
# This section is for configuring posts to CWOP.
# If you wish to do this, set the option 'enable' to true,
# and specify the station ID (e.g., CW1234).
enable = false
station = replace_me
# If this is an APRS (radio amateur) station, uncomment
# the following and replace with a passcode (e.g., 12345).
#passcode = replace_me (APRS stations only)
[[PWSweather]]
# This section is for configuring posts to PWSweather.com.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[WOW]]
# This section is for configuring posts to WOW.
# If you wish to do this, set the option 'enable' to true,
# and specify a station and password.
enable = false
station = replace_me
password = replace_me
[[Wunderground]]
# This section is for configuring posts to the Weather Underground.
# If you wish to do this, set the option 'enable' to true,
# and specify a station (e.g., 'KORHOODR3') and password.
enable = false
station = replace_me
password = replace_me
# Set the following to True to have weewx use the WU "Rapidfire"
# protocol. Not all hardware can support it. See the User's Guide.
rapidfire = False
##############################################################################
# This section specifies what reports, using which skins, to generate.
[StdReport]
# Where the skins reside, relative to WEEWX_ROOT
SKIN_ROOT = /etc/weewx/skins
# Where the generated reports should go, relative to WEEWX_ROOT
HTML_ROOT = /usr/share/nginx/www
# The database binding indicates which data should be used in reports.
data_binding = wx_binding
# Each of the following subsections defines a report that will be run.
[[StandardReport]]
# See the customizing guide to change the units, plot types and line
# colors, modify the fonts, display additional sensor data, and other
# customizations. Many of those changes can be made here by overriding
# parameters, or by modifying templates within the skin itself.
# The StandardReport uses the 'Standard' skin, which contains the
# images, templates and plots for the report.
skin = Bootstrap
[[[Units]]]
[[[[Groups]]]]
group_altitude = meter
group_speed2 = meter_per_second2
group_pressure = mbar
group_rain = mm
group_rainrate = mm_per_hour
group_temperature = degree_C
group_degree_day = degree_C_day
group_speed = km_per_hour
[[FTP]]
# FTP'ing the results to a webserver is treated as just another report,
# albeit one with an unusual report generator!
skin = Ftp
# If you wish to use FTP, uncomment and fill out the next four lines.
#user = replace with the ftp username
#password = replace with the ftp password
#server = replace with the ftp server name, e.g, www.threefools.org
#path = replace with the ftp destination directory (e.g., /weather)
# Set to True for an FTP over TLS (FTPS) connection. Not all servers
# support this.
secure_ftp = False
# To upload files from something other than what HTML_ROOT is set
# to above, specify a different HTML_ROOT here.
#HTML_ROOT = /var/www/html/weewx
# Most FTP servers use port 21
port = 21
# Set to 1 to use passive mode, zero for active mode
passive = 1
[[RSYNC]]
# rsync'ing to a webserver is treated as just another report
skin = Rsync
# If you wish to use rsync, you must configure passwordless ssh using
# public/private key authentication from the user account that weewx
# runs as to the user account on the remote machine where the files
# will be copied.
#
# The following three lines determine where files will be sent.
#server = replace with the rsync server name, e.g, www.threefools.org
#path = replace with the rsync destination directory (e.g., /weather)
#user = replace with the rsync username
# Rsync can be configured to remove files from the remote server if
# they don't exist under HTML_ROOT locally. USE WITH CAUTION: if you
# make a mistake in the remote path, you could could unintentionally
# cause unrelated files to be deleted. Set to 1 to enable remote file
# deletion, zero to allow files to accumulate remotely.
delete = 0
##############################################################################
# This service acts as a filter, converting the unit system coming from
# the hardware to a unit system in the database.
[StdConvert]
# The target_unit affects only the unit system in the database. Once
# chosen it cannot be changed without converting the entire database.
# Modification of target_unit after starting weewx will result in
# corrupt data - the database will contain a mix of US and METRIC data.
#
# The value of target_unit does not affect the unit system for
# reporting - reports can display US, Metric, or any combination of units.
#
# In most cases, target_unit should be left as the default: US
#
# In particular, those migrating from a standard wview installation
# should use US since that is what the wview database contains.
# DO NOT MODIFY THIS VALUE UNLESS YOU KNOW WHAT YOU ARE DOING!
target_unit = METRIC # Options are 'US', 'METRICWX', or 'METRIC'
##############################################################################
# This section can adjust data using calibration expressions.
[StdCalibrate]
[[Corrections]]
# For each type, an arbitrary calibration expression can be given.
# It should be in the units defined in the StdConvert section.
# Example:
foo = foo + 0.2
##############################################################################
# This section is for quality control checks. If units are not specified,
# values must be in the units defined in the StdConvert section.
[StdQC]
[[MinMax]]
barometer = 900, 1100, mbar
outTemp = -50, 50, degree_C
inTemp = -50, 50, degree_C
outHumidity = 0, 100
inHumidity = 0, 100
windSpeed = 0, 120, meter_per_second
rainRate = 0, 1000, mm_per_hour
rain = 0, 1000, mm
uv = 0, 16
pressure = 24, 34.5, inHg
##############################################################################
# This section controls the origin of derived values.
[StdWXCalculate]
[[Calculations]]
# Derived quantities are calculated by this service. Possible values
are:
# hardware - use the value provided by hardware
# software - use the value calculated by weewx
# prefer_hardware - use value provide by hardware if available,
# otherwise use value calculated by weewx
pressure = hardware
barometer = prefer_hardware
altimeter = hardware
windchill = prefer_hardware
heatindex = prefer_hardware
dewpoint = prefer_hardware
inDewpoint = prefer_hardware
rainRate = hardware
##############################################################################
# For hardware that supports it, this section controls how often the
# onboard clock gets updated.
[StdTimeSynch]
# How often to check the weather station clock for drift (in seconds)
clock_check = 14400
# How much it can drift before we will correct it (in seconds)
max_drift = 5
##############################################################################
# This section is for configuring the archive service.
[StdArchive]
# If the station hardware supports data logging then the archive interval
# will be downloaded from the station. Otherwise, specify it (in seconds).
archive_interval = 300
archive_delay = 60
# If possible, new archive records are downloaded from the station
# hardware. If the hardware does not support this, then new archive
# records will be generated in software.
# Set the following to "software" to force software record generation.
record_generation = hardware
# Whether to include LOOP data in hi/low statistics
loop_hilo = True
# The data binding used to save archive records
data_binding = wx_binding
##############################################################################
# This section binds a data store to a database.
[DataBindings]
[[wx_binding]]
# The database must match one of the sections in [Databases].
# This is likely to be the only option you would want to change.
database = archive_mysql
# The name of the table within the database
table_name = archive
# The manager handles aggregation of data for historical summaries
manager = weewx.wxmanager.WXDaySummaryManager
# The schema defines the structure of the database.
# It is *only* used when the database is created.
schema = schemas.wview.schema
##############################################################################
# This section defines various databases.
[Databases]
# A SQLite database is simply a single file
[[archive_sqlite]]
database_type = SQLite
database_name = weewx.sdb
# MySQL
[[archive_mysql]]
database_type = MySQL
database_name = weewx
##############################################################################
# This section defines defaults for the different types of databases.
[DatabaseTypes]
# Defaults for SQLite databases
[[SQLite]]
driver = weedb.sqlite
# Directory in which the database files are located
SQLITE_ROOT = /var/lib/weewx
# Defaults for MySQL databases
[[MySQL]]
driver = weedb.mysql
# The host where the database is located
host = localhost
# The user name for logging in to the host
user = weewx
# The password for the user name
password = weewx
##############################################################################
# This section configures the internal weewx engine.
[Engine]
[[Services]]
# This section specifies the services that should be run. They are
# grouped by type, and the order of services within each group
# determines the order in which the services will be run.
prep_services = weewx.engine.StdTimeSynch
data_services = ,
process_services = weewx.engine.StdConvert, weewx.engine.StdCalibrate,
weewx.engine.StdQC, weewx.wxservices.StdWXCalculate
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry,
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, weewx.restx.StdCWOP,
weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport
##############################################################################
