i'm not liking fedora 19 to much right now for hiding the debug out put but
i have it running right now will post back when it quits
it might take some time
thanks for all the help every one
On Saturday, November 12, 2016 at 8:28:17 AM UTC-6, mwall wrote:
>
>
>
> On Saturday, November 12, 2016 at 9:08:24 AM UTC-5, Radar wrote:
>>
>> here is it running by its self using
>> PYTHONPATH=. python user/interceptor.py --debug --mode=sniff --iface=p5p1
>> --filter="src host 192.168.2.14 && dst port 80" --device=acurite-bridge
>>
>> raw data:
>> dateutc=now&action=updateraw&realtime=1&id=24C86E01765D&mt=tower&sensor=00007411&humidity=51&tempf=52.1&baromin=28.67&battery=normal&rssi=2
>> raw packet: {'usUnits.00007411.24C86E01765D': 1,
>> 'barometer.00007411.24C86E01765D': 28.67,
>> 'temperature.00007411.24C86E01765D': 52.1,
>> 'bridge_id.00007411.24C86E01765D': '24C86E01765D',
>> 'humidity.00007411.24C86E01765D': 51.0, 'dateTime': 1478958489,
>> 'rssi.00007411.24C86E01765D': 50.0, 'sensor_id.00007411.24C86E01765D':
>> '00007411', 'battery.00007411.24C86E01765D': 0,
>> 'dateTime.00007411.24C86E01765D': 1478958489,
>> 'sensor_type.00007411.24C86E01765D': 'tower', 'usUnits': 1}
>> mapped packet: {'barometer': 28.67, 'txBatteryStatus': 0, 'outHumidity':
>> 51.0, 'dateTime': 1478958489, 'outTemp': 52.1, 'rxCheckPercent': 50.0,
>> 'usUnits': 1}
>> identifiers: {'bridge_id': '24C86E01765D', 'sensor_type': 'tower',
>> 'sensor_id': '00006045'}
>>
>
> you're not getting debug log messages, even though you specified --debug.
> is your syslog configuration hiding debug?
>
> m
>
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
