Tom expressed doubts as to whether WU displayed soil temps on rapid fire - and you appear to be using rapid fire. Have you tried uploading normal archive records instead of rapid firing??
Did you run with debug set, as Tom suggested, and confirm that the REC and LOOP contain the soil temperature?? On Sunday, 30 October 2016 10:02:55 UTC+2, Jacek Skowroński wrote: > I had changed the probe slot for 1, and now I have > soilTemp1: 46.0, > > but on the WU page something is strange. I get C close to the soil temp, > but there is no value. > > https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56#history > > On Saturday, October 29, 2016 at 9:49:27 PM UTC+2, Jacek Skowroński wrote: >> >> Hi, >> I have Davis Vatange pro2 with external leaf_soil module located on ID=2. >> So according to help I did such an command >> >> wee_device --set-transmitter-type=2,8,1,1 >> >> >> So if I understood it correctly I would have temperature and humidity of >> soil on the external temp1 and external hum1. >> How to get those data to WU? >> >> Just now on my station we do not see temp and humidity of the soil. >> >> https://www.wunderground.com/personal-weather-station/dashboard?ID=IWOJEWDZ56 >> >> Next topic is best timings for sending data, is it possible to get data >> in RealTime? >> In general Davis has archival for 5min (300sec) so it sends data every >> 5minute. >> I had tried rapid fire, but it sends data every 2.5 sec but data changes >> every 5minute so it's a little bit crazy. >> >> Is there anybody using Davis Vantage pro2 and WU and could share your >> config? >> >> Thanks in advance >> BR >> Jacek >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
