I try. i'm only sure that rtl_433 works fine. if you want, and if you can, for troubleshooting, tomorrow (now here is 11.40 PM), I can get you to connect directly to my raspberry pi with weewx and rtl_433 sdr installed on with a lacrosse ws2310.
Il giorno lunedì 12 settembre 2016 22:50:55 UTC+2, mwall ha scritto: > > > > On Monday, September 12, 2016 at 2:02:20 PM UTC-4, Marco Tibaldi wrote: >> >> >> hello Matt and thank you for the work you're doing , I think that the >> work is finished the result will be spectacular . >> I'm testing the new 0.6 driver , I remapped the sensor packages with new >> specifications : >> >> >> [SDR] >> # This section is for the software-defined radio driver. >> # The driver to use >> driver = user.sdr >> cmd = '/usr/local/bin/rtl_433 -q -U' >> [[sensor_map]] >> windGust = wind_gust.9:34.LaCrossePacket >> rain = Rainfall.9:34.LaCrossePacket >> windSpeed = wind_speed.9:34.LaCrossePacket >> windDir = wind_dir.9:34.LaCrossePacket >> outHumidity = humidity.9:34.LaCrossePacket >> outTemp = temperature.9:34.LaCrossePacket >> >> I set in the cmd -q -U for the time problem. >> >> *But I think there is a problem , the system performs the first reading , >> after which it stops.* >> > > marco, > > please try v0.7 (commit 3b3d41d) > > it has improved subprocess monitoring. > > if the driver fails, then diagnose one step at a time. > > first step is to run rtl_433 directly: > > sudo rtl_433 -q -U > > if you are in a noisy environment, you can use the -R option to listen > only for specific sensors. > > if that works, and you see output from your sensors, then run the driver > directly: > > cd /home/weewx > sudo PYTHONPATH=bin python bin/user/sdr.py > > you can use the --debug option for more information. > > if that works, then run weewxd directly: > > cd /home/weewx > sudo bin/weewxd weewx.conf > > once that works, you should be able to run weewx as a daemon (manually or > at system startup). > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
