I tried with : cmd = / usr / local / bin / rtl_433 -f 868.300000 with: cmd = ' / usr / local / bin / rtl_433 -f 868300000 ' with: cmd = " / usr / local / bin / rtl_433 -f 868300000 "
I even changed the sdr.py file self._cmd = stn_dict.get ( ' cmd ' , ' rtl_433 -f 868300000 ' ) but it does not work . I can not make run the cmd with the arguments correctly , that are used to tune the dongle at 868 mhz . I also created a .sh file that contains the syntax correct rtl_433 to run , I made it executable , and I tried to run from weewx.conf, nothing! no one has an idea to run the command cmd = / usr / local / bin / rtl_433 -f 868.300000 from inside weewx.conf with the correct arguments ? Il giorno giovedì 8 settembre 2016 22:54:02 UTC+2, mwall ha scritto: > > On Thursday, September 8, 2016 at 3:20:58 PM UTC-4, Marco Tibaldi wrote: >> >> >> Good evening everyone, I'm ' trying to use the SDR driver of Matt Wall >> changed today. the weewx web page updates to display the correct date and >> time , but do not get any value in the conditions . >> > > you need to define a sensor map in the [SDR] stanza in weewx.conf (you > should also do another pull). for example, if you want to capture data from > a fine offset instrument cluster, do something like this: > > [SDR] > driver = user.sdr > [[sensor_map]] > wind_gust.0026.FOWH1080Packet = windGust > battery.0026.FOWH1080Packet = outBatteryStatus > total_rain.0026.FOWH1080Packet = rain > wind_speed.0026.FOWH1080Packet = windSpeed > wind_dir.0026.FOWH1080Packet = windDir > humidity.0026.FOWH1080Packet = outHumidity > temperature.0026.FOWH1080Packet = outTemp > > if you have some acurite sensors, do something like this: > > [SDR] > driver = user.sdr > [[sensor_map]] > wind_dir.0BFA.Acurite5n1Packet = windDir > wind_speed.0BFA.Acurite5n1Packet = windSpeed > temperature.0BFA.Acurite5n1Packet = outTemp > humidity.0BFA.Acurite5n1Packet = outHumidity > temperature.24A4.AcuriteTowerPacket = inTemp > humidity.24A4.AcuriteTowerPacket = inHumidity > > the left-hand side is a tuple with observation_name.sensor_id.packet_type > > you can use * as wildcard for any part of the tuple. > > details and examples in the readme.txt > > to see what your sdr is reporting, first run the driver directly like this: > > PYTHONPATH=/home/weewx/bin python /home/weewx/bin/user/sdr.py > > or set debug=1 in weewx.conf and look at all of the raw output from all > the sensors that your sdr can detect. > > m > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
