hallo,
As beginner, I am running weewx on a raspi 3 (setup.py) connected to a
german TFA Nexus (TE923 clone). Weewx is running fine apart from ocassional
crashes (a different issue) and I am able to configure the templates to get
as much data as possible using the standard driver but suspect some may be
missing. I am trying to correlate the raw data from the Nexus, the database
weewx.sdb and this message that was printed out using the standard alarm.py
file:
Record:
{'heatindex': 61.76571428571423, 'altimeter': 30.124462235072006,
'outHumidity': 77.0, 'ET': None, 'maxSolarRad': None, 'link_rain': 0.0,
'uvBatteryStatus': 1.0, 'interval': 20, 'link_uv': 1.0,
'rainBatteryStatus': 1.0, 'uvLinkStatus': None, 'outLinkStatus': None,
'rainRate': 0.0, 'outTempBatteryStatus': 1.0, 'forecast': 6.0,
'extraLinkStatus1': None, 'extraLinkStatus2': None, 'extraLinkStatus3':
None, 'extraLinkStatus4': None, 'inTemp': 74.00571428571429, 'storm': 0.0,
'inDewpoint': 61.276098375690395, 'barometer': 30.16245112929988,
'windchill': None, 'dewpoint': 54.476171656787166, 'windrun': 0.0,
'extraBatteryStatus2': 1.0, 'rain': 0.0, 'humidex': 66.2961129592404,
'pressure': 27.508388767307753, 'extraHumid4': None, 'extraHumid3': None,
'rainLinkStatus': None, 'extraHumid1': 61.0, 'rainTotal':
0.06578000000000007, 'extraTemp4': None, 'extraTemp2': None, 'extraTemp3':
None, 'usUnits': 1, 'extraTemp1': 74.47999999999995, 'link_wind': 1.0,
'windLinkStatus': None, 'appTemp': None, 'extraBatteryStatus3': 1.0,
'windBatteryStatus': 1.0, 'UV': None, 'extraBatteryStatus4': 1.0,
'dateTime': 1471761600.0, 'windDir': None, 'outTemp': 61.76571428571423,
'windSpeed': None, 'inHumidity': 64.53968253968254, 'windGust': None,
'link_3': 1.0, 'link_2': 0.0, 'link_1': 0.0, 'windGustDir': None,
'extraBatteryStatus1': 1.0, 'cloudbase': 4159.995077547059, 'link_5': 1.0,
'link_4': 1.0}
This appears to be what is called "rec" in the script and to be a python
dictionary. I notice that there are data fields that are not identified in
either the buffer output or the database, for example those marked in red:
forecast, inDewpoint, humidex, cloudbase.
Are these fields actually calculated by the weewx software? Can I change
the database to accept these data if they could be read in? I should be
grateful for any tips, many thanks
--
You received this message because you are subscribed to the Google Groups
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
