Deleted: trunk/LayoutTests/imported/w3c/web-platform-tests/url/url-setters-expected.txt (279736 => 279737)
--- trunk/LayoutTests/imported/w3c/web-platform-tests/url/url-setters-expected.txt 2021-07-08 18:14:23 UTC (rev 279736)
+++ trunk/LayoutTests/imported/w3c/web-platform-tests/url/url-setters-expected.txt 2021-07-08 18:24:06 UTC (rev 279737)
@@ -1,642 +0,0 @@
-
-PASS Loading data…
-PASS URL: Setting <a://example.net>.protocol = '' The empty string is not a valid scheme. Setter leaves the URL unchanged.
-PASS <a>: Setting <a://example.net>.protocol = '' The empty string is not a valid scheme. Setter leaves the URL unchanged.
-PASS <area>: Setting <a://example.net>.protocol = '' The empty string is not a valid scheme. Setter leaves the URL unchanged.
-PASS URL: Setting <a://example.net>.protocol = 'b'
-PASS <a>: Setting <a://example.net>.protocol = 'b'
-PASS <area>: Setting <a://example.net>.protocol = 'b'
-PASS URL: Setting <_javascript_:alert(1)>.protocol = 'defuse'
-PASS <a>: Setting <_javascript_:alert(1)>.protocol = 'defuse'
-PASS <area>: Setting <_javascript_:alert(1)>.protocol = 'defuse'
-PASS URL: Setting <a://example.net>.protocol = 'B' Upper-case ASCII is lower-cased
-PASS <a>: Setting <a://example.net>.protocol = 'B' Upper-case ASCII is lower-cased
-PASS <area>: Setting <a://example.net>.protocol = 'B' Upper-case ASCII is lower-cased
-PASS URL: Setting <a://example.net>.protocol = 'é' Non-ASCII is rejected
-PASS <a>: Setting <a://example.net>.protocol = 'é' Non-ASCII is rejected
-PASS <area>: Setting <a://example.net>.protocol = 'é' Non-ASCII is rejected
-PASS URL: Setting <a://example.net>.protocol = '0b' No leading digit
-PASS <a>: Setting <a://example.net>.protocol = '0b' No leading digit
-PASS <area>: Setting <a://example.net>.protocol = '0b' No leading digit
-PASS URL: Setting <a://example.net>.protocol = '+b' No leading punctuation
-PASS <a>: Setting <a://example.net>.protocol = '+b' No leading punctuation
-PASS <area>: Setting <a://example.net>.protocol = '+b' No leading punctuation
-PASS URL: Setting <a://example.net>.protocol = 'bC0+-.'
-PASS <a>: Setting <a://example.net>.protocol = 'bC0+-.'
-PASS <area>: Setting <a://example.net>.protocol = 'bC0+-.'
-PASS URL: Setting <a://example.net>.protocol = 'b,c' Only some punctuation is acceptable
-PASS <a>: Setting <a://example.net>.protocol = 'b,c' Only some punctuation is acceptable
-PASS <area>: Setting <a://example.net>.protocol = 'b,c' Only some punctuation is acceptable
-PASS URL: Setting <a://example.net>.protocol = 'bé' Non-ASCII is rejected
-PASS <a>: Setting <a://example.net>.protocol = 'bé' Non-ASCII is rejected
-PASS <area>: Setting <a://example.net>.protocol = 'bé' Non-ASCII is rejected
-PASS URL: Setting <http://t...@example.net>.protocol = 'file' Can’t switch from URL containing username/password/port to file
-PASS <a>: Setting <http://t...@example.net>.protocol = 'file' Can’t switch from URL containing username/password/port to file
-PASS <area>: Setting <http://t...@example.net>.protocol = 'file' Can’t switch from URL containing username/password/port to file
-PASS URL: Setting <https://example.net:1234>.protocol = 'file'
-PASS <a>: Setting <https://example.net:1234>.protocol = 'file'
-PASS <area>: Setting <https://example.net:1234>.protocol = 'file'
-PASS URL: Setting <wss://x:x...@example.net:1234>.protocol = 'file'
-PASS <a>: Setting <wss://x:x...@example.net:1234>.protocol = 'file'
-PASS <area>: Setting <wss://x:x...@example.net:1234>.protocol = 'file'
-PASS URL: Setting <file://localhost/>.protocol = 'http' Can’t switch from file URL with no host
-PASS <a>: Setting <file://localhost/>.protocol = 'http' Can’t switch from file URL with no host
-PASS <area>: Setting <file://localhost/>.protocol = 'http' Can’t switch from file URL with no host
-PASS URL: Setting <file:///test>.protocol = 'https'
-PASS <a>: Setting <file:///test>.protocol = 'https'
-PASS <area>: Setting <file:///test>.protocol = 'https'
-PASS URL: Setting <file:>.protocol = 'wss'
-PASS <a>: Setting <file:>.protocol = 'wss'
-PASS <area>: Setting <file:>.protocol = 'wss'
-FAIL URL: Setting <http://example.net>.protocol = 'b' Can’t switch from special scheme to non-special assert_equals: expected "http://example.net/" but got "b://example.net/"
-FAIL <a>: Setting <http://example.net>.protocol = 'b' Can’t switch from special scheme to non-special assert_equals: expected "http://example.net/" but got "b://example.net/"
-FAIL <area>: Setting <http://example.net>.protocol = 'b' Can’t switch from special scheme to non-special assert_equals: expected "http://example.net/" but got "b://example.net/"
-FAIL URL: Setting <file://hi/path>.protocol = 's' assert_equals: expected "file://hi/path" but got "s://hi/path"
-FAIL <a>: Setting <file://hi/path>.protocol = 's' assert_equals: expected "file://hi/path" but got "s://hi/path"
-FAIL <area>: Setting <file://hi/path>.protocol = 's' assert_equals: expected "file://hi/path" but got "s://hi/path"
-FAIL URL: Setting <https://example.net>.protocol = 's' assert_equals: expected "https://example.net/" but got "s://example.net/"
-FAIL <a>: Setting <https://example.net>.protocol = 's' assert_equals: expected "https://example.net/" but got "s://example.net/"
-FAIL <area>: Setting <https://example.net>.protocol = 's' assert_equals: expected "https://example.net/" but got "s://example.net/"
-FAIL URL: Setting <ftp://example.net>.protocol = 'test' assert_equals: expected "ftp://example.net/" but got "test://example.net/"
-FAIL <a>: Setting <ftp://example.net>.protocol = 'test' assert_equals: expected "ftp://example.net/" but got "test://example.net/"
-FAIL <area>: Setting <ftp://example.net>.protocol = 'test' assert_equals: expected "ftp://example.net/" but got "test://example.net/"
-FAIL URL: Setting <mailto:m...@example.net>.protocol = 'http' Cannot-be-a-base URL doesn’t have a host, but URL in a special scheme must. assert_equals: expected "mailto:m...@example.net" but got "http://m...@example.net/"
-FAIL <a>: Setting <mailto:m...@example.net>.protocol = 'http' Cannot-be-a-base URL doesn’t have a host, but URL in a special scheme must. assert_equals: expected "mailto:m...@example.net" but got "http://m...@example.net/"
-FAIL <area>: Setting <mailto:m...@example.net>.protocol = 'http' Cannot-be-a-base URL doesn’t have a host, but URL in a special scheme must. assert_equals: expected "mailto:m...@example.net" but got "http://m...@example.net/"
-FAIL URL: Setting <ssh://m...@example.net>.protocol = 'http' Can’t switch from non-special scheme to special assert_equals: expected "ssh://m...@example.net" but got "http://m...@example.net/"
-FAIL <a>: Setting <ssh://m...@example.net>.protocol = 'http' Can’t switch from non-special scheme to special assert_equals: expected "ssh://m...@example.net" but got "http://m...@example.net/"
-FAIL <area>: Setting <ssh://m...@example.net>.protocol = 'http' Can’t switch from non-special scheme to special assert_equals: expected "ssh://m...@example.net" but got "http://m...@example.net/"
-FAIL URL: Setting <ssh://m...@example.net>.protocol = 'https' assert_equals: expected "ssh://m...@example.net" but got "https://m...@example.net/"
-FAIL <a>: Setting <ssh://m...@example.net>.protocol = 'https' assert_equals: expected "ssh://m...@example.net" but got "https://m...@example.net/"
-FAIL <area>: Setting <ssh://m...@example.net>.protocol = 'https' assert_equals: expected "ssh://m...@example.net" but got "https://m...@example.net/"
-PASS URL: Setting <ssh://m...@example.net>.protocol = 'file'
-PASS <a>: Setting <ssh://m...@example.net>.protocol = 'file'
-PASS <area>: Setting <ssh://m...@example.net>.protocol = 'file'
-FAIL URL: Setting <ssh://example.net>.protocol = 'file' assert_equals: expected "ssh://example.net" but got "file://example.net/"
-FAIL <a>: Setting <ssh://example.net>.protocol = 'file' assert_equals: expected "ssh://example.net" but got "file://example.net/"
-FAIL <area>: Setting <ssh://example.net>.protocol = 'file' assert_equals: expected "ssh://example.net" but got "file://example.net/"
-FAIL URL: Setting <nonsense:///test>.protocol = 'https' assert_equals: expected "nonsense:///test" but got "https://test/"
-FAIL <a>: Setting <nonsense:///test>.protocol = 'https' assert_equals: expected "nonsense:///test" but got "https://test/"
-FAIL <area>: Setting <nonsense:///test>.protocol = 'https' assert_equals: expected "nonsense:///test" but got "https://test/"
-PASS URL: Setting <http://example.net>.protocol = 'https:foo : bar' Stuff after the first ':' is ignored
-PASS <a>: Setting <http://example.net>.protocol = 'https:foo : bar' Stuff after the first ':' is ignored
-PASS <area>: Setting <http://example.net>.protocol = 'https:foo : bar' Stuff after the first ':' is ignored
-PASS URL: Setting <data:text/html,<p>Test>.protocol = 'view-source+data:foo : bar' Stuff after the first ':' is ignored
-PASS <a>: Setting <data:text/html,<p>Test>.protocol = 'view-source+data:foo : bar' Stuff after the first ':' is ignored
-PASS <area>: Setting <data:text/html,<p>Test>.protocol = 'view-source+data:foo : bar' Stuff after the first ':' is ignored
-PASS URL: Setting <http://foo.com:443/>.protocol = 'https' Port is set to null if it is the default for new scheme.
-PASS <a>: Setting <http://foo.com:443/>.protocol = 'https' Port is set to null if it is the default for new scheme.
-PASS <area>: Setting <http://foo.com:443/>.protocol = 'https' Port is set to null if it is the default for new scheme.
-PASS URL: Setting <file:///home/you/index.html>.username = 'me' No host means no username
-PASS <a>: Setting <file:///home/you/index.html>.username = 'me' No host means no username
-PASS <area>: Setting <file:///home/you/index.html>.username = 'me' No host means no username
-PASS URL: Setting <unix:/run/foo.socket>.username = 'me' No host means no username
-PASS <a>: Setting <unix:/run/foo.socket>.username = 'me' No host means no username
-PASS <area>: Setting <unix:/run/foo.socket>.username = 'me' No host means no username
-PASS URL: Setting <mailto:y...@example.net>.username = 'me' Cannot-be-a-base means no username
-PASS <a>: Setting <mailto:y...@example.net>.username = 'me' Cannot-be-a-base means no username
-PASS <area>: Setting <mailto:y...@example.net>.username = 'me' Cannot-be-a-base means no username
-PASS URL: Setting <_javascript_:alert(1)>.username = 'wario'
-PASS <a>: Setting <_javascript_:alert(1)>.username = 'wario'
-PASS <area>: Setting <_javascript_:alert(1)>.username = 'wario'
-PASS URL: Setting <http://example.net>.username = 'me'
-PASS <a>: Setting <http://example.net>.username = 'me'
-PASS <area>: Setting <http://example.net>.username = 'me'
-PASS URL: Setting <http://:sec...@example.net>.username = 'me'
-PASS <a>: Setting <http://:sec...@example.net>.username = 'me'
-PASS <area>: Setting <http://:sec...@example.net>.username = 'me'
-PASS URL: Setting <http://m...@example.net>.username = ''
-PASS <a>: Setting <http://m...@example.net>.username = ''
-PASS <area>: Setting <http://m...@example.net>.username = ''
-PASS URL: Setting <http://me:sec...@example.net>.username = ''
-PASS <a>: Setting <http://me:sec...@example.net>.username = ''
-PASS <area>: Setting <http://me:sec...@example.net>.username = ''
-PASS URL: Setting <http://example.net>.username = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS <a>: Setting <http://example.net>.username = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS <area>: Setting <http://example.net>.username = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS URL: Setting <http://example.net>.username = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS <a>: Setting <http://example.net>.username = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS <area>: Setting <http://example.net>.username = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS URL: Setting <sc:///>.username = 'x'
-PASS <a>: Setting <sc:///>.username = 'x'
-PASS <area>: Setting <sc:///>.username = 'x'
-PASS URL: Setting <_javascript_://x/>.username = 'wario'
-PASS <a>: Setting <_javascript_://x/>.username = 'wario'
-PASS <area>: Setting <_javascript_://x/>.username = 'wario'
-PASS URL: Setting <file://test/>.username = 'test'
-PASS <a>: Setting <file://test/>.username = 'test'
-PASS <area>: Setting <file://test/>.username = 'test'
-PASS URL: Setting <file:///home/me/index.html>.password = 'secret' No host means no password
-PASS <a>: Setting <file:///home/me/index.html>.password = 'secret' No host means no password
-PASS <area>: Setting <file:///home/me/index.html>.password = 'secret' No host means no password
-PASS URL: Setting <unix:/run/foo.socket>.password = 'secret' No host means no password
-PASS <a>: Setting <unix:/run/foo.socket>.password = 'secret' No host means no password
-PASS <area>: Setting <unix:/run/foo.socket>.password = 'secret' No host means no password
-PASS URL: Setting <mailto:m...@example.net>.password = 'secret' Cannot-be-a-base means no password
-PASS <a>: Setting <mailto:m...@example.net>.password = 'secret' Cannot-be-a-base means no password
-PASS <area>: Setting <mailto:m...@example.net>.password = 'secret' Cannot-be-a-base means no password
-PASS URL: Setting <http://example.net>.password = 'secret'
-PASS <a>: Setting <http://example.net>.password = 'secret'
-PASS <area>: Setting <http://example.net>.password = 'secret'
-PASS URL: Setting <http://m...@example.net>.password = 'secret'
-PASS <a>: Setting <http://m...@example.net>.password = 'secret'
-PASS <area>: Setting <http://m...@example.net>.password = 'secret'
-PASS URL: Setting <http://:sec...@example.net>.password = ''
-PASS <a>: Setting <http://:sec...@example.net>.password = ''
-PASS <area>: Setting <http://:sec...@example.net>.password = ''
-PASS URL: Setting <http://me:sec...@example.net>.password = ''
-PASS <a>: Setting <http://me:sec...@example.net>.password = ''
-PASS <area>: Setting <http://me:sec...@example.net>.password = ''
-PASS URL: Setting <http://example.net>.password = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS <a>: Setting <http://example.net>.password = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS <area>: Setting <http://example.net>.password = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the userinfo encode set.
-PASS URL: Setting <http://example.net>.password = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS <a>: Setting <http://example.net>.password = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS <area>: Setting <http://example.net>.password = '%c3%89té' Bytes already percent-encoded are left as-is.
-PASS URL: Setting <sc:///>.password = 'x'
-PASS <a>: Setting <sc:///>.password = 'x'
-PASS <area>: Setting <sc:///>.password = 'x'
-PASS URL: Setting <_javascript_://x/>.password = 'bowser'
-PASS <a>: Setting <_javascript_://x/>.password = 'bowser'
-PASS <area>: Setting <_javascript_://x/>.password = 'bowser'
-PASS URL: Setting <file://test/>.password = 'test'
-PASS <a>: Setting <file://test/>.password = 'test'
-PASS <area>: Setting <file://test/>.password = 'test'
-PASS URL: Setting <sc://x/>.host = '\0' Non-special scheme
-PASS <a>: Setting <sc://x/>.host = '\0' Non-special scheme
-PASS <area>: Setting <sc://x/>.host = '\0' Non-special scheme
-PASS URL: Setting <sc://x/>.host = ' '
-PASS <a>: Setting <sc://x/>.host = ' '
-PASS <area>: Setting <sc://x/>.host = ' '
-PASS URL: Setting <sc://x/>.host = '
-'
-PASS <a>: Setting <sc://x/>.host = '
-'
-PASS <area>: Setting <sc://x/>.host = '
-'
-PASS URL: Setting <sc://x/>.host = '\r'
-PASS <a>: Setting <sc://x/>.host = '\r'
-PASS <area>: Setting <sc://x/>.host = '\r'
-PASS URL: Setting <sc://x/>.host = ' '
-PASS <a>: Setting <sc://x/>.host = ' '
-PASS <area>: Setting <sc://x/>.host = ' '
-PASS URL: Setting <sc://x/>.host = '#'
-PASS <a>: Setting <sc://x/>.host = '#'
-PASS <area>: Setting <sc://x/>.host = '#'
-PASS URL: Setting <sc://x/>.host = '/'
-PASS <a>: Setting <sc://x/>.host = '/'
-PASS <area>: Setting <sc://x/>.host = '/'
-PASS URL: Setting <sc://x/>.host = '?'
-PASS <a>: Setting <sc://x/>.host = '?'
-PASS <area>: Setting <sc://x/>.host = '?'
-PASS URL: Setting <sc://x/>.host = '@'
-PASS <a>: Setting <sc://x/>.host = '@'
-PASS <area>: Setting <sc://x/>.host = '@'
-FAIL URL: Setting <sc://x/>.host = 'ß' assert_equals: expected "sc://%C3%9F/" but got "sc://xn--zca/"
-FAIL <a>: Setting <sc://x/>.host = 'ß' assert_equals: expected "sc://%C3%9F/" but got "sc://xn--zca/"
-FAIL <area>: Setting <sc://x/>.host = 'ß' assert_equals: expected "sc://%C3%9F/" but got "sc://xn--zca/"
-PASS URL: Setting <https://x/>.host = 'ß' IDNA Nontransitional_Processing
-PASS <a>: Setting <https://x/>.host = 'ß' IDNA Nontransitional_Processing
-PASS <area>: Setting <https://x/>.host = 'ß' IDNA Nontransitional_Processing
-PASS URL: Setting <mailto:m...@example.net>.host = 'example.com' Cannot-be-a-base means no host
-PASS <a>: Setting <mailto:m...@example.net>.host = 'example.com' Cannot-be-a-base means no host
-PASS <area>: Setting <mailto:m...@example.net>.host = 'example.com' Cannot-be-a-base means no host
-PASS URL: Setting <data:text/plain,Stuff>.host = 'example.net' Cannot-be-a-base means no host
-PASS <a>: Setting <data:text/plain,Stuff>.host = 'example.net' Cannot-be-a-base means no host
-PASS <area>: Setting <data:text/plain,Stuff>.host = 'example.net' Cannot-be-a-base means no host
-PASS URL: Setting <http://example.net>.host = 'example.com:8080'
-PASS <a>: Setting <http://example.net>.host = 'example.com:8080'
-PASS <area>: Setting <http://example.net>.host = 'example.com:8080'
-PASS URL: Setting <http://example.net:8080>.host = 'example.com' Port number is unchanged if not specified in the new value
-PASS <a>: Setting <http://example.net:8080>.host = 'example.com' Port number is unchanged if not specified in the new value
-PASS <area>: Setting <http://example.net:8080>.host = 'example.com' Port number is unchanged if not specified in the new value
-PASS URL: Setting <http://example.net:8080>.host = 'example.com:' Port number is unchanged if not specified
-PASS <a>: Setting <http://example.net:8080>.host = 'example.com:' Port number is unchanged if not specified
-PASS <area>: Setting <http://example.net:8080>.host = 'example.com:' Port number is unchanged if not specified
-PASS URL: Setting <http://example.net>.host = '' The empty host is not valid for special schemes
-PASS <a>: Setting <http://example.net>.host = '' The empty host is not valid for special schemes
-PASS <area>: Setting <http://example.net>.host = '' The empty host is not valid for special schemes
-FAIL URL: Setting <view-source+http://example.net/foo>.host = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-FAIL <a>: Setting <view-source+http://example.net/foo>.host = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-FAIL <area>: Setting <view-source+http://example.net/foo>.host = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-PASS URL: Setting <a:/foo>.host = 'example.net' Path-only URLs can gain a host
-PASS <a>: Setting <a:/foo>.host = 'example.net' Path-only URLs can gain a host
-PASS <area>: Setting <a:/foo>.host = 'example.net' Path-only URLs can gain a host
-PASS URL: Setting <http://example.net>.host = '0x7F000001:8080' IPv4 address syntax is normalized
-PASS <a>: Setting <http://example.net>.host = '0x7F000001:8080' IPv4 address syntax is normalized
-PASS <area>: Setting <http://example.net>.host = '0x7F000001:8080' IPv4 address syntax is normalized
-PASS URL: Setting <http://example.net>.host = '[::0:01]:2' IPv6 address syntax is normalized
-PASS <a>: Setting <http://example.net>.host = '[::0:01]:2' IPv6 address syntax is normalized
-PASS <area>: Setting <http://example.net>.host = '[::0:01]:2' IPv6 address syntax is normalized
-PASS URL: Setting <http://example.net>.host = '[2001:db8::2]:4002' IPv6 literal address with port, crbug.com/1012416
-PASS <a>: Setting <http://example.net>.host = '[2001:db8::2]:4002' IPv6 literal address with port, crbug.com/1012416
-PASS <area>: Setting <http://example.net>.host = '[2001:db8::2]:4002' IPv6 literal address with port, crbug.com/1012416
-PASS URL: Setting <http://example.net>.host = 'example.com:80' Default port number is removed
-PASS <a>: Setting <http://example.net>.host = 'example.com:80' Default port number is removed
-PASS <area>: Setting <http://example.net>.host = 'example.com:80' Default port number is removed
-PASS URL: Setting <https://example.net>.host = 'example.com:443' Default port number is removed
-PASS <a>: Setting <https://example.net>.host = 'example.com:443' Default port number is removed
-PASS <area>: Setting <https://example.net>.host = 'example.com:443' Default port number is removed
-PASS URL: Setting <https://example.net>.host = 'example.com:80' Default port number is only removed for the relevant scheme
-PASS <a>: Setting <https://example.net>.host = 'example.com:80' Default port number is only removed for the relevant scheme
-PASS <area>: Setting <https://example.net>.host = 'example.com:80' Default port number is only removed for the relevant scheme
-PASS URL: Setting <http://example.net:8080>.host = 'example.com:80' Port number is removed if new port is scheme default and existing URL has a non-default port
-PASS <a>: Setting <http://example.net:8080>.host = 'example.com:80' Port number is removed if new port is scheme default and existing URL has a non-default port
-PASS <area>: Setting <http://example.net:8080>.host = 'example.com:80' Port number is removed if new port is scheme default and existing URL has a non-default port
-PASS URL: Setting <http://example.net/path>.host = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080/stuff' Stuff after a / delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080/stuff' Stuff after a / delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080/stuff' Stuff after a / delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080?stuff' Stuff after a ? delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080?stuff' Stuff after a ? delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080?stuff' Stuff after a ? delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080#stuff' Stuff after a # delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080#stuff' Stuff after a # delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080#stuff' Stuff after a # delimiter is ignored
-PASS URL: Setting <http://example.net/path>.host = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <a>: Setting <http://example.net/path>.host = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <area>: Setting <http://example.net/path>.host = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS URL: Setting <view-source+http://example.net/path>.host = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS <a>: Setting <view-source+http://example.net/path>.host = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS <area>: Setting <view-source+http://example.net/path>.host = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS URL: Setting <view-source+http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <view-source+http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <view-source+http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.host = 'example.com:8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.host = 'example.com:65535' Port numbers are 16 bit integers
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:65535' Port numbers are 16 bit integers
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:65535' Port numbers are 16 bit integers
-PASS URL: Setting <http://example.net/path>.host = 'example.com:65536' Port numbers are 16 bit integers, overflowing is an error. Hostname is still set, though.
-PASS <a>: Setting <http://example.net/path>.host = 'example.com:65536' Port numbers are 16 bit integers, overflowing is an error. Hostname is still set, though.
-PASS <area>: Setting <http://example.net/path>.host = 'example.com:65536' Port numbers are 16 bit integers, overflowing is an error. Hostname is still set, though.
-PASS URL: Setting <http://example.net/>.host = '[google.com]' Broken IPv6
-PASS <a>: Setting <http://example.net/>.host = '[google.com]' Broken IPv6
-PASS <area>: Setting <http://example.net/>.host = '[google.com]' Broken IPv6
-PASS URL: Setting <http://example.net/>.host = '[::1.2.3.4x]'
-PASS <a>: Setting <http://example.net/>.host = '[::1.2.3.4x]'
-PASS <area>: Setting <http://example.net/>.host = '[::1.2.3.4x]'
-PASS URL: Setting <http://example.net/>.host = '[::1.2.3.]'
-PASS <a>: Setting <http://example.net/>.host = '[::1.2.3.]'
-PASS <area>: Setting <http://example.net/>.host = '[::1.2.3.]'
-PASS URL: Setting <http://example.net/>.host = '[::1.2.]'
-PASS <a>: Setting <http://example.net/>.host = '[::1.2.]'
-PASS <area>: Setting <http://example.net/>.host = '[::1.2.]'
-PASS URL: Setting <http://example.net/>.host = '[::1.]'
-PASS <a>: Setting <http://example.net/>.host = '[::1.]'
-PASS <area>: Setting <http://example.net/>.host = '[::1.]'
-PASS URL: Setting <file://y/>.host = 'x:123'
-PASS <a>: Setting <file://y/>.host = 'x:123'
-PASS <area>: Setting <file://y/>.host = 'x:123'
-PASS URL: Setting <file://y/>.host = 'loc%41lhost'
-PASS <a>: Setting <file://y/>.host = 'loc%41lhost'
-PASS <area>: Setting <file://y/>.host = 'loc%41lhost'
-PASS URL: Setting <file://hi/x>.host = ''
-PASS <a>: Setting <file://hi/x>.host = ''
-PASS <area>: Setting <file://hi/x>.host = ''
-PASS URL: Setting <sc://test@test/>.host = ''
-PASS <a>: Setting <sc://test@test/>.host = ''
-PASS <area>: Setting <sc://test@test/>.host = ''
-PASS URL: Setting <sc://test:12/>.host = ''
-PASS <a>: Setting <sc://test:12/>.host = ''
-PASS <area>: Setting <sc://test:12/>.host = ''
-PASS URL: Setting <sc://x/>.hostname = '\0' Non-special scheme
-PASS <a>: Setting <sc://x/>.hostname = '\0' Non-special scheme
-PASS <area>: Setting <sc://x/>.hostname = '\0' Non-special scheme
-PASS URL: Setting <sc://x/>.hostname = ' '
-PASS <a>: Setting <sc://x/>.hostname = ' '
-PASS <area>: Setting <sc://x/>.hostname = ' '
-PASS URL: Setting <sc://x/>.hostname = '
-'
-PASS <a>: Setting <sc://x/>.hostname = '
-'
-PASS <area>: Setting <sc://x/>.hostname = '
-'
-PASS URL: Setting <sc://x/>.hostname = '\r'
-PASS <a>: Setting <sc://x/>.hostname = '\r'
-PASS <area>: Setting <sc://x/>.hostname = '\r'
-PASS URL: Setting <sc://x/>.hostname = ' '
-PASS <a>: Setting <sc://x/>.hostname = ' '
-PASS <area>: Setting <sc://x/>.hostname = ' '
-PASS URL: Setting <sc://x/>.hostname = '#'
-PASS <a>: Setting <sc://x/>.hostname = '#'
-PASS <area>: Setting <sc://x/>.hostname = '#'
-FAIL URL: Setting <sc://x/>.hostname = '/' assert_equals: expected "sc:///" but got "sc://x/"
-FAIL <a>: Setting <sc://x/>.hostname = '/' assert_equals: expected "sc:///" but got "sc://x/"
-FAIL <area>: Setting <sc://x/>.hostname = '/' assert_equals: expected "sc:///" but got "sc://x/"
-PASS URL: Setting <sc://x/>.hostname = '?'
-PASS <a>: Setting <sc://x/>.hostname = '?'
-PASS <area>: Setting <sc://x/>.hostname = '?'
-PASS URL: Setting <sc://x/>.hostname = '@'
-PASS <a>: Setting <sc://x/>.hostname = '@'
-PASS <area>: Setting <sc://x/>.hostname = '@'
-PASS URL: Setting <mailto:m...@example.net>.hostname = 'example.com' Cannot-be-a-base means no host
-PASS <a>: Setting <mailto:m...@example.net>.hostname = 'example.com' Cannot-be-a-base means no host
-PASS <area>: Setting <mailto:m...@example.net>.hostname = 'example.com' Cannot-be-a-base means no host
-PASS URL: Setting <data:text/plain,Stuff>.hostname = 'example.net' Cannot-be-a-base means no host
-PASS <a>: Setting <data:text/plain,Stuff>.hostname = 'example.net' Cannot-be-a-base means no host
-PASS <area>: Setting <data:text/plain,Stuff>.hostname = 'example.net' Cannot-be-a-base means no host
-PASS URL: Setting <http://example.net:8080>.hostname = 'example.com'
-PASS <a>: Setting <http://example.net:8080>.hostname = 'example.com'
-PASS <area>: Setting <http://example.net:8080>.hostname = 'example.com'
-PASS URL: Setting <http://example.net>.hostname = '' The empty host is not valid for special schemes
-PASS <a>: Setting <http://example.net>.hostname = '' The empty host is not valid for special schemes
-PASS <area>: Setting <http://example.net>.hostname = '' The empty host is not valid for special schemes
-FAIL URL: Setting <view-source+http://example.net/foo>.hostname = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-FAIL <a>: Setting <view-source+http://example.net/foo>.hostname = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-FAIL <area>: Setting <view-source+http://example.net/foo>.hostname = '' The empty host is OK for non-special schemes assert_equals: expected "view-source+http:///foo" but got "view-source+http://example.net/foo"
-PASS URL: Setting <a:/foo>.hostname = 'example.net' Path-only URLs can gain a host
-PASS <a>: Setting <a:/foo>.hostname = 'example.net' Path-only URLs can gain a host
-PASS <area>: Setting <a:/foo>.hostname = 'example.net' Path-only URLs can gain a host
-PASS URL: Setting <http://example.net:8080>.hostname = '0x7F000001' IPv4 address syntax is normalized
-PASS <a>: Setting <http://example.net:8080>.hostname = '0x7F000001' IPv4 address syntax is normalized
-PASS <area>: Setting <http://example.net:8080>.hostname = '0x7F000001' IPv4 address syntax is normalized
-PASS URL: Setting <http://example.net>.hostname = '[::0:01]' IPv6 address syntax is normalized
-PASS <a>: Setting <http://example.net>.hostname = '[::0:01]' IPv6 address syntax is normalized
-PASS <area>: Setting <http://example.net>.hostname = '[::0:01]' IPv6 address syntax is normalized
-FAIL URL: Setting <http://example.net/path>.hostname = 'example.com:8080' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com/path" but got "http://example.net/path"
-FAIL <a>: Setting <http://example.net/path>.hostname = 'example.com:8080' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com/path" but got "http://example.net/path"
-FAIL <area>: Setting <http://example.net/path>.hostname = 'example.com:8080' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com/path" but got "http://example.net/path"
-FAIL URL: Setting <http://example.net:8080/path>.hostname = 'example.com:' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com:8080/path" but got "http://example.net:8080/path"
-FAIL <a>: Setting <http://example.net:8080/path>.hostname = 'example.com:' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com:8080/path" but got "http://example.net:8080/path"
-FAIL <area>: Setting <http://example.net:8080/path>.hostname = 'example.com:' Stuff after a : delimiter is ignored assert_equals: expected "http://example.com:8080/path" but got "http://example.net:8080/path"
-PASS URL: Setting <http://example.net/path>.hostname = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.hostname = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.hostname = 'example.com/stuff' Stuff after a / delimiter is ignored
-PASS URL: Setting <http://example.net/path>.hostname = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.hostname = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.hostname = 'example.com?stuff' Stuff after a ? delimiter is ignored
-PASS URL: Setting <http://example.net/path>.hostname = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.hostname = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.hostname = 'example.com#stuff' Stuff after a # delimiter is ignored
-PASS URL: Setting <http://example.net/path>.hostname = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <a>: Setting <http://example.net/path>.hostname = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <area>: Setting <http://example.net/path>.hostname = 'example.com\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS URL: Setting <view-source+http://example.net/path>.hostname = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS <a>: Setting <view-source+http://example.net/path>.hostname = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS <area>: Setting <view-source+http://example.net/path>.hostname = 'example.com\stuff' \ is not a delimiter for non-special schemes, but still forbidden in hosts
-PASS URL: Setting <http://example.net/>.hostname = '[google.com]' Broken IPv6
-PASS <a>: Setting <http://example.net/>.hostname = '[google.com]' Broken IPv6
-PASS <area>: Setting <http://example.net/>.hostname = '[google.com]' Broken IPv6
-PASS URL: Setting <http://example.net/>.hostname = '[::1.2.3.4x]'
-PASS <a>: Setting <http://example.net/>.hostname = '[::1.2.3.4x]'
-PASS <area>: Setting <http://example.net/>.hostname = '[::1.2.3.4x]'
-PASS URL: Setting <http://example.net/>.hostname = '[::1.2.3.]'
-PASS <a>: Setting <http://example.net/>.hostname = '[::1.2.3.]'
-PASS <area>: Setting <http://example.net/>.hostname = '[::1.2.3.]'
-PASS URL: Setting <http://example.net/>.hostname = '[::1.2.]'
-PASS <a>: Setting <http://example.net/>.hostname = '[::1.2.]'
-PASS <area>: Setting <http://example.net/>.hostname = '[::1.2.]'
-PASS URL: Setting <http://example.net/>.hostname = '[::1.]'
-PASS <a>: Setting <http://example.net/>.hostname = '[::1.]'
-PASS <area>: Setting <http://example.net/>.hostname = '[::1.]'
-PASS URL: Setting <file://y/>.hostname = 'x:123'
-PASS <a>: Setting <file://y/>.hostname = 'x:123'
-PASS <area>: Setting <file://y/>.hostname = 'x:123'
-PASS URL: Setting <file://y/>.hostname = 'loc%41lhost'
-PASS <a>: Setting <file://y/>.hostname = 'loc%41lhost'
-PASS <area>: Setting <file://y/>.hostname = 'loc%41lhost'
-PASS URL: Setting <file://hi/x>.hostname = ''
-PASS <a>: Setting <file://hi/x>.hostname = ''
-PASS <area>: Setting <file://hi/x>.hostname = ''
-PASS URL: Setting <sc://test@test/>.hostname = ''
-PASS <a>: Setting <sc://test@test/>.hostname = ''
-PASS <area>: Setting <sc://test@test/>.hostname = ''
-PASS URL: Setting <sc://test:12/>.hostname = ''
-PASS <a>: Setting <sc://test:12/>.hostname = ''
-PASS <area>: Setting <sc://test:12/>.hostname = ''
-PASS URL: Setting <non-spec:/.//p>.hostname = 'h' Drop /. from path
-PASS <a>: Setting <non-spec:/.//p>.hostname = 'h' Drop /. from path
-PASS <area>: Setting <non-spec:/.//p>.hostname = 'h' Drop /. from path
-FAIL URL: Setting <non-spec:/.//p>.hostname = '' assert_equals: expected "non-spec:////p" but got "non-spec:/.//p"
-FAIL <a>: Setting <non-spec:/.//p>.hostname = '' assert_equals: expected "non-spec:////p" but got "non-spec:/.//p"
-FAIL <area>: Setting <non-spec:/.//p>.hostname = '' assert_equals: expected "non-spec:////p" but got "non-spec:/.//p"
-PASS URL: Setting <http://example.net>.port = '8080'
-PASS <a>: Setting <http://example.net>.port = '8080'
-PASS <area>: Setting <http://example.net>.port = '8080'
-PASS URL: Setting <http://example.net:8080>.port = '' Port number is removed if empty is the new value
-PASS <a>: Setting <http://example.net:8080>.port = '' Port number is removed if empty is the new value
-PASS <area>: Setting <http://example.net:8080>.port = '' Port number is removed if empty is the new value
-PASS URL: Setting <http://example.net:8080>.port = '80' Default port number is removed
-PASS <a>: Setting <http://example.net:8080>.port = '80' Default port number is removed
-PASS <area>: Setting <http://example.net:8080>.port = '80' Default port number is removed
-PASS URL: Setting <https://example.net:4433>.port = '443' Default port number is removed
-PASS <a>: Setting <https://example.net:4433>.port = '443' Default port number is removed
-PASS <area>: Setting <https://example.net:4433>.port = '443' Default port number is removed
-PASS URL: Setting <https://example.net>.port = '80' Default port number is only removed for the relevant scheme
-PASS <a>: Setting <https://example.net>.port = '80' Default port number is only removed for the relevant scheme
-PASS <area>: Setting <https://example.net>.port = '80' Default port number is only removed for the relevant scheme
-PASS URL: Setting <http://example.net/path>.port = '8080/stuff' Stuff after a / delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.port = '8080/stuff' Stuff after a / delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.port = '8080/stuff' Stuff after a / delimiter is ignored
-PASS URL: Setting <http://example.net/path>.port = '8080?stuff' Stuff after a ? delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.port = '8080?stuff' Stuff after a ? delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.port = '8080?stuff' Stuff after a ? delimiter is ignored
-PASS URL: Setting <http://example.net/path>.port = '8080#stuff' Stuff after a # delimiter is ignored
-PASS <a>: Setting <http://example.net/path>.port = '8080#stuff' Stuff after a # delimiter is ignored
-PASS <area>: Setting <http://example.net/path>.port = '8080#stuff' Stuff after a # delimiter is ignored
-PASS URL: Setting <http://example.net/path>.port = '8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <a>: Setting <http://example.net/path>.port = '8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS <area>: Setting <http://example.net/path>.port = '8080\stuff' Stuff after a \ delimiter is ignored for special schemes
-PASS URL: Setting <view-source+http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <view-source+http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <view-source+http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <http://example.net/path>.port = '8080stuff2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.port = '8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <a>: Setting <http://example.net/path>.port = '8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS <area>: Setting <http://example.net/path>.port = '8080+2' Anything other than ASCII digit stops the port parser in a setter but is not an error
-PASS URL: Setting <http://example.net/path>.port = '65535' Port numbers are 16 bit integers
-PASS <a>: Setting <http://example.net/path>.port = '65535' Port numbers are 16 bit integers
-PASS <area>: Setting <http://example.net/path>.port = '65535' Port numbers are 16 bit integers
-PASS URL: Setting <http://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS <a>: Setting <http://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS <area>: Setting <http://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS URL: Setting <non-special://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS <a>: Setting <non-special://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS <area>: Setting <non-special://example.net:8080/path>.port = '65536' Port numbers are 16 bit integers, overflowing is an error
-PASS URL: Setting <file://test/>.port = '12'
-PASS <a>: Setting <file://test/>.port = '12'
-PASS <area>: Setting <file://test/>.port = '12'
-PASS URL: Setting <file://localhost/>.port = '12'
-PASS <a>: Setting <file://localhost/>.port = '12'
-PASS <area>: Setting <file://localhost/>.port = '12'
-PASS URL: Setting <non-base:value>.port = '12'
-PASS <a>: Setting <non-base:value>.port = '12'
-PASS <area>: Setting <non-base:value>.port = '12'
-PASS URL: Setting <sc:///>.port = '12'
-PASS <a>: Setting <sc:///>.port = '12'
-PASS <area>: Setting <sc:///>.port = '12'
-PASS URL: Setting <sc://x/>.port = '12'
-PASS <a>: Setting <sc://x/>.port = '12'
-PASS <area>: Setting <sc://x/>.port = '12'
-PASS URL: Setting <_javascript_://x/>.port = '12'
-PASS <a>: Setting <_javascript_://x/>.port = '12'
-PASS <area>: Setting <_javascript_://x/>.port = '12'
-PASS URL: Setting <mailto:m...@example.net>.pathname = '/foo' Cannot-be-a-base don’t have a path
-PASS <a>: Setting <mailto:m...@example.net>.pathname = '/foo' Cannot-be-a-base don’t have a path
-PASS <area>: Setting <mailto:m...@example.net>.pathname = '/foo' Cannot-be-a-base don’t have a path
-PASS URL: Setting <unix:/run/foo.socket?timeout=10>.pathname = '/var/log/../run/bar.socket'
-PASS <a>: Setting <unix:/run/foo.socket?timeout=10>.pathname = '/var/log/../run/bar.socket'
-PASS <area>: Setting <unix:/run/foo.socket?timeout=10>.pathname = '/var/log/../run/bar.socket'
-PASS URL: Setting <https://example.net#nav>.pathname = 'home'
-PASS <a>: Setting <https://example.net#nav>.pathname = 'home'
-PASS <area>: Setting <https://example.net#nav>.pathname = 'home'
-PASS URL: Setting <https://example.net#nav>.pathname = '../home'
-PASS <a>: Setting <https://example.net#nav>.pathname = '../home'
-PASS <area>: Setting <https://example.net#nav>.pathname = '../home'
-PASS URL: Setting <http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is a segment delimiter for 'special' URLs
-PASS <a>: Setting <http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is a segment delimiter for 'special' URLs
-PASS <area>: Setting <http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is a segment delimiter for 'special' URLs
-PASS URL: Setting <view-source+http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is *not* a segment delimiter for non-'special' URLs
-PASS <a>: Setting <view-source+http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is *not* a segment delimiter for non-'special' URLs
-PASS <area>: Setting <view-source+http://example.net/home?lang=fr#nav>.pathname = '\a\%2E\b\%2e.\c' \ is *not* a segment delimiter for non-'special' URLs
-PASS URL: Setting <a:/>.pathname = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the default encode set. Tabs and newlines are removed.
-PASS <a>: Setting <a:/>.pathname = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the default encode set. Tabs and newlines are removed.
-PASS <area>: Setting <a:/>.pathname = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the default encode set. Tabs and newlines are removed.
-PASS URL: Setting <http://example.net>.pathname = '%2e%2E%c3%89té' Bytes already percent-encoded are left as-is, including %2E outside dotted segments.
-PASS <a>: Setting <http://example.net>.pathname = '%2e%2E%c3%89té' Bytes already percent-encoded are left as-is, including %2E outside dotted segments.
-PASS <area>: Setting <http://example.net>.pathname = '%2e%2E%c3%89té' Bytes already percent-encoded are left as-is, including %2E outside dotted segments.
-PASS URL: Setting <http://example.net>.pathname = '?' ? needs to be encoded
-PASS <a>: Setting <http://example.net>.pathname = '?' ? needs to be encoded
-PASS <area>: Setting <http://example.net>.pathname = '?' ? needs to be encoded
-PASS URL: Setting <http://example.net>.pathname = '#' # needs to be encoded
-PASS <a>: Setting <http://example.net>.pathname = '#' # needs to be encoded
-PASS <area>: Setting <http://example.net>.pathname = '#' # needs to be encoded
-PASS URL: Setting <sc://example.net>.pathname = '?' ? needs to be encoded, non-special scheme
-PASS <a>: Setting <sc://example.net>.pathname = '?' ? needs to be encoded, non-special scheme
-PASS <area>: Setting <sc://example.net>.pathname = '?' ? needs to be encoded, non-special scheme
-PASS URL: Setting <sc://example.net>.pathname = '#' # needs to be encoded, non-special scheme
-PASS <a>: Setting <sc://example.net>.pathname = '#' # needs to be encoded, non-special scheme
-PASS <area>: Setting <sc://example.net>.pathname = '#' # needs to be encoded, non-special scheme
-PASS URL: Setting <file://monkey/>.pathname = '\\' File URLs and (back)slashes
-PASS <a>: Setting <file://monkey/>.pathname = '\\' File URLs and (back)slashes
-PASS <area>: Setting <file://monkey/>.pathname = '\\' File URLs and (back)slashes
-PASS URL: Setting <file:///unicorn>.pathname = '//\/' File URLs and (back)slashes
-PASS <a>: Setting <file:///unicorn>.pathname = '//\/' File URLs and (back)slashes
-PASS <area>: Setting <file:///unicorn>.pathname = '//\/' File URLs and (back)slashes
-PASS URL: Setting <file:///unicorn>.pathname = '//monkey/..//' File URLs and (back)slashes
-PASS <a>: Setting <file:///unicorn>.pathname = '//monkey/..//' File URLs and (back)slashes
-PASS <area>: Setting <file:///unicorn>.pathname = '//monkey/..//' File URLs and (back)slashes
-PASS URL: Setting <non-spec:/>.pathname = '/.//p' Serialize /. in path
-PASS <a>: Setting <non-spec:/>.pathname = '/.//p' Serialize /. in path
-PASS <area>: Setting <non-spec:/>.pathname = '/.//p' Serialize /. in path
-PASS URL: Setting <non-spec:/>.pathname = '/..//p'
-PASS <a>: Setting <non-spec:/>.pathname = '/..//p'
-PASS <area>: Setting <non-spec:/>.pathname = '/..//p'
-FAIL URL: Setting <non-spec:/>.pathname = '//p' assert_equals: expected "non-spec:/.//p" but got "non-spec://p"
-FAIL <a>: Setting <non-spec:/>.pathname = '//p' assert_equals: expected "non-spec:/.//p" but got "non-spec://p"
-FAIL <area>: Setting <non-spec:/>.pathname = '//p' assert_equals: expected "non-spec:/.//p" but got "non-spec://p"
-PASS URL: Setting <non-spec:/.//>.pathname = 'p' Drop /. from path
-PASS <a>: Setting <non-spec:/.//>.pathname = 'p' Drop /. from path
-PASS <area>: Setting <non-spec:/.//>.pathname = 'p' Drop /. from path
-PASS URL: Setting <https://example.net#nav>.search = 'lang=fr'
-PASS <a>: Setting <https://example.net#nav>.search = 'lang=fr'
-PASS <area>: Setting <https://example.net#nav>.search = 'lang=fr'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.search = 'lang=fr'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.search = 'lang=fr'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.search = 'lang=fr'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.search = '?lang=fr'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.search = '?lang=fr'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.search = '?lang=fr'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.search = '??lang=fr'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.search = '??lang=fr'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.search = '??lang=fr'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.search = '?'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.search = '?'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.search = '?'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.search = ''
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.search = ''
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.search = ''
-PASS URL: Setting <https://example.net?lang=en-US>.search = ''
-PASS <a>: Setting <https://example.net?lang=en-US>.search = ''
-PASS <area>: Setting <https://example.net?lang=en-US>.search = ''
-PASS URL: Setting <https://example.net>.search = ''
-PASS <a>: Setting <https://example.net>.search = ''
-PASS <area>: Setting <https://example.net>.search = ''
-PASS URL: Setting <a:/>.search = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the query encode set. Tabs and newlines are removed.
-PASS <a>: Setting <a:/>.search = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the query encode set. Tabs and newlines are removed.
-PASS <area>: Setting <a:/>.search = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' UTF-8 percent encoding with the query encode set. Tabs and newlines are removed.
-PASS URL: Setting <http://example.net>.search = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS <a>: Setting <http://example.net>.search = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS <area>: Setting <http://example.net>.search = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS URL: Setting <https://example.net>.hash = 'main'
-PASS <a>: Setting <https://example.net>.hash = 'main'
-PASS <area>: Setting <https://example.net>.hash = 'main'
-PASS URL: Setting <https://example.net#nav>.hash = 'main'
-PASS <a>: Setting <https://example.net#nav>.hash = 'main'
-PASS <area>: Setting <https://example.net#nav>.hash = 'main'
-PASS URL: Setting <https://example.net?lang=en-US>.hash = '##nav'
-PASS <a>: Setting <https://example.net?lang=en-US>.hash = '##nav'
-PASS <area>: Setting <https://example.net?lang=en-US>.hash = '##nav'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.hash = '#main'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.hash = '#main'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.hash = '#main'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.hash = '#'
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.hash = '#'
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.hash = '#'
-PASS URL: Setting <https://example.net?lang=en-US#nav>.hash = ''
-PASS <a>: Setting <https://example.net?lang=en-US#nav>.hash = ''
-PASS <area>: Setting <https://example.net?lang=en-US#nav>.hash = ''
-PASS URL: Setting <http://example.net>.hash = '#foo bar'
-PASS <a>: Setting <http://example.net>.hash = '#foo bar'
-PASS <area>: Setting <http://example.net>.hash = '#foo bar'
-PASS URL: Setting <http://example.net>.hash = '#foo"bar'
-PASS <a>: Setting <http://example.net>.hash = '#foo"bar'
-PASS <area>: Setting <http://example.net>.hash = '#foo"bar'
-PASS URL: Setting <http://example.net>.hash = '#foo<bar'
-PASS <a>: Setting <http://example.net>.hash = '#foo<bar'
-PASS <area>: Setting <http://example.net>.hash = '#foo<bar'
-PASS URL: Setting <http://example.net>.hash = '#foo>bar'
-PASS <a>: Setting <http://example.net>.hash = '#foo>bar'
-PASS <area>: Setting <http://example.net>.hash = '#foo>bar'
-PASS URL: Setting <http://example.net>.hash = '#foo`bar'
-PASS <a>: Setting <http://example.net>.hash = '#foo`bar'
-PASS <area>: Setting <http://example.net>.hash = '#foo`bar'
-PASS URL: Setting <a:/>.hash = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' Simple percent-encoding; tabs and newlines are removed
-PASS <a>: Setting <a:/>.hash = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' Simple percent-encoding; tabs and newlines are removed
-PASS <area>: Setting <a:/>.hash = '\0
-\r !"#$%&'()*+,-./09:;<=>?@AZ[\]^_`az{|}~Éé' Simple percent-encoding; tabs and newlines are removed
-PASS URL: Setting <http://example.net>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS <a>: Setting <http://example.net>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS <area>: Setting <http://example.net>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS URL: Setting <non-spec:/>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS <a>: Setting <non-spec:/>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS <area>: Setting <non-spec:/>.hash = 'a\0b' Percent-encode NULLs in fragment
-PASS URL: Setting <http://example.net>.hash = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS <a>: Setting <http://example.net>.hash = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS <area>: Setting <http://example.net>.hash = '%c3%89té' Bytes already percent-encoded are left as-is
-PASS URL: Setting <_javascript_:alert(1)>.hash = 'castle'
-PASS <a>: Setting <_javascript_:alert(1)>.hash = 'castle'
-PASS <area>: Setting <_javascript_:alert(1)>.hash = 'castle'
-
