Apparently nobody is interested in this project or similar. I haven't seen so little activity on a group as I've seen here. So I guess web2py doesn't have a huge user base/following. Was worth a try though. Looks like a very well made system, but apparently isn't something that could do for me. Major deal breaker was to have the GPIOServer.py stopping on its own with no apparent reason or user interaction. As that is the event listening script, having it to stop means the whole system becomes unusable. Also looks like there is nobody available to help others figure out web2py-related issues... so I guess I'll have to go back to the drawing board and look elsewhere.
Thanks to anyone who looked... Cheers. PS: Advise to others who like ma may be looking for home automation solutions... web2py didn't do for me so you may want o avoid wasting your time and skip it. If it did work for you and disagree with me... please do contact me. I'd love to be proven wrong and get a working system. Thanks On Thursday, May 30, 2013 2:55:39 AM UTC-4, freäk qnc wrote: > > Hi everyone... I have a quick question... could someone give me a quick > example on how I could modify the app presented on instructables by > willq44? > http://www.instructables.com/id/Raspberry-Pi-GPIO-home-automation/?ALLSTEPS > > I would like to change to a toggle the function so that triggering a > button will set a GPIO pin to high and hitting it again will turn it to low > with corresponding visual feedback (icon button on and off). It's rather > simple but as a noob on web2py I need some help... I implemented 3 systems > trying to get this simple task of triggering a relay via webui on a > standalone (non internet connected) system. > > My experience so far to give you a bit of background context... > > I've used BerryIO <http://frozenmist.co.uk/downloads/berryio/>, a great > system and easy to install, but definitely an overkill not very flexible > and with no user management for login (must login with machine account > (root/admin) since it exposes also system level information. Unfortunately > is not simple enough and requires a steep learning curve if wanting to > change something, I found no support, groups, or documentation illustrating > how to customize it. Not being readily customizable to turn it into > something simple (like being able to allow multi user access to a set of > triggers) made me almost immediately look elsewhere for my needs. > > I have also used webIOPi, by Eric Ptak (aka trouch) he's been great and > the system works OK... there are several issues, lacks of authentication > which I worked around with a small php login script, but the way webIOPI is > built required me to use ProxyPass directive and jumpt through hoops to > have it all working. Problem though was that after all the hard work I > ended up with an unreliable and too often unresponsive system. There could > be a sporadic delay in execution, but they are so frequent they became > unacceptable to let it control anything. > To try and fix responsiveness as it was happening in patterns that would > lead to think it might have been due to dynamic overclocking kicking in and > out depending on activity, I tried overclocking and keep the clock steady > (at 900MHz), but that made no difference in responsiveness as commands > triggered continue to get delayed and queued with delay. > I also tried using new equipment (wireless N router, oversized 2A power > adapter to make sure there would be no downclocking due to low power) to > minimize possible slowdowns that could've been attributed to hardware. > Nothing worked. WebIOPI is a promising system, but not ready for prime > time, I also had to work using quo.js to make the UI compatible with touch > events on mobile OSes, but all in all I hope it moves forward eventually > since it's a nice system overall that only need more resources and love by > more than just 1 dedicated person. Eric announced that will take some time > off after diving in and supporting daily the community with his invaluable > help.. I hope he'll get some funding and bring webIOPi to fruition for an > affordable fee... but until then webIOPi won't do for me. > > So out of frustration and need to get things done I went digging and found an > old instructable > <http://www.instructables.com/id/Web-Control-of-Raspberry-Pi-GPIO/>for > "raspberrypi-gpio" - a web based interface for the Raspberry Pi GPIO pins > with the project hosted on google > code<https://code.google.com/p/raspberrypi-gpio/> > > After a few road bumps I had it all working... the lag wasn't terrible and > because values of pins are stored in database the reliability was pretty > good. The problem that eventually led me to drop it was that starting the > service as suggested in the help thread on the instructable page by Daniel > Curzon (the author of the useful how-to), caused 2 problems 1) user is > prompted by a refresh timing when the script launches and for a headless > system this is a deal-breaker already, 2) even when connected to monitor > and keyboard and setting the value, the script causes an endless loop that > de-facto impedes a full startup and hence causes errors as php/mySQL aren't > accessible. Not willing to deal with it all I had to drop it... besides the > so-so responsiveness (at times about 4 sec to trigger a pin) wasn't a great > motivator to troubleshoot. > > So I landed on web2py which at first I didn't get into for lack of > experience with python and because there were solutions I was more > confident about as they were using LAMP setup basically with a python > server pre-made (like webIOPi)... > > Still not very straight forward for a noob on web2py and python... so I'll > treasure any info anyone will take the time to send my way. > > Thanks for your time and help! > > Cheers :) > -- --- You received this message because you are subscribed to the Google Groups "web2py-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
