good hint ^^ thanks again. On Sat, Feb 5, 2011 at 12:56 PM, Yuri Z <vega...@gmail.com> wrote:
> You welcome. By the way, if you want to run the server as daemon - check > this out< > http://groups.google.com/group/wave-protocol/browse_thread/thread/d9cdcea0d5393eda > > > . > > 2011/2/5 Andrea Giaccherini <andreagiaccher...@gmail.com> > > > Thanks a lot it works!!!! > > > > On Sat, Feb 5, 2011 at 1:46 AM, Yuri Z <vega...@gmail.com> wrote: > > > > > I also had this problem. > > > Here is the I answer I got, hope this helps: > > > > > > ttp_frontend_addresses is the list of name/IP:ports that the server > > > should bind to and listen on. > > > http_frontend_public_address is the publicly accessible address > > > (name:port) that is used when an address needs to be communicated to > > > an external agent (i.e. robot). > > > > > > So, if the server sits behind a firewall with NAT, the config might be: > > > http_frontend_addresses=localhost:9898,192.168.34.2:9898 > > > http_frontend_public_address=example.com:80 <http://example.com/> > > > > > > -Tad > > > > > > 2011/2/5 Andrea Giaccherini <andreagiaccher...@gmail.com> > > > > > > > Here a simple question, it's WAIB example server supposed to work on > > lan? > > > > > > > > I compiled it folliwing this notes here: > > > > http://www.waveprotocol.org/wave-in-a-box/building-wave-in-a-box. > > > > I run a linux system, ubuntu 10.04 and i've got a fully configured > and > > > > working lan > > > > > > > > It works on loopback on the server machine, but i can't it reach from > > > > another machine through the lan using: > > > > > > > > [SERVER_URL]:9898 > > > > > > > > i'm doing something wrong or what? > > > > > > > > > >
