Thanks for the report. I’ll update the doc… > On Dec 24, 2022, at 3:45 AM, pepijn de vos <pepijnde...@gmail.com> wrote: > > > Hello, > > I'm quite new to VPP and trying to follow the "VPP as a Home Gateway" setup. > After following the installation instructions and copying the configuration > files, NAT does not seem to be working. > When I enabled NAT44 it gave an outright error: nat44: unknown input `enable > users 50 user-sessions ...' > I then tried to change that to "nat44 plugin enable" as an educated guess, > and also tried to enable CNAT instead as the example does. > > In both cases the result is the same: > The WAN port gets an IP, the LAN port hands out IPs, and I can ping > 192.168.5.2 from the LAN port. > But I can not ping 192.168.5.1 or the rest of the internet from either the > router itself or the LAN port. > What I CAN do is enable the ping plugin and ping 8.8.8.8 from vppctl. > So it seems to me like the LAN and WAN sides are both working as intended, > but NAT isn't working. > > I'm not really sure how to go ahead debugging this issue. > Also apologies if this is too much of a "user" question for a "dev" mailing > list, but I did not find anything else, and it seems like the docs are at > least somewhat wrong/outdated. > > Regards, > Pepijn > > >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#22382): https://lists.fd.io/g/vpp-dev/message/22382 Mute This Topic: https://lists.fd.io/mt/95859254/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
