Dear VPP community,
I'm trying to operate VPP on SolidRun LX2160 board, which is based on 16 cores
A72 NXP SoC, unfortunately, with little success. Does anybody have any
experience with running VPP on such boards?
The performance in my tests is quite good (more then 4mpps NDR) , but VPP works
very unstable and segfaults in time interval from seconds to hours after start.
The events causing segfaults were not identified. It may happen (and usually)
when you walk through CLI. It may happen (less frequently) when just forwarding
packets without a touch to vppctl. Applying config longer then few lines
usually cause that. Second VPPCTL connection usually couses that,
I was trying the following versions of VPP with literally same results:
- VPP 21.01 from LSDK distribution, built on the board natively
- VPP 22.10, from Master branch, crossbuilt using
https://docs.nxp.com/bundle/GUID-87AD3497-0BD4-4492-8040-3F3BE0F2B087/page/GUID-8A75A4AD-2EB9-4A5A-A784-465B98E67951.html
- VPP 22.08, built using flexbuild tool (from same link above).
I was trying different settings of main_heap memory pool (size, pagesize),
different hugepages settings (standard 4k, huge 2M, huge 1G), but there were no
serious improvement. It looks like 22.08 most stable and may last for few hours.
As performance looks promising, I'm really looking forward to make it work
stable. Can somebody please advice , where do I need to look at to fix the
problem? There are , according to CSIT, good results on other ARM v8 platforms.
As for OS, I'm using pre-built Ubuntu Core-based distribution from SolidRun.
See below OS information, logs with crash. See in attachement: Platform dmesg
and GDB trace of 22.10 crash.
Below are system logs of VPP crashes.
abramov@nc2s5:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=20.04
DISTRIB_CODENAME=focal
DISTRIB_DESCRIPTION="Ubuntu 20.04.5 LTS"
abramov@nc2s5:~$ uname -a
Linux nc2s5 5.10.35-00018-gbb124648d42c #1 SMP PREEMPT Wed May 11 17:07:05 UTC
2022 aarch64 aarch64 aarch64 GNU/Linux
abramov@nc2s5:~$
Dec 01 10:35:42 nc2s5 vnet[2259]: received signal SIGSEGV, PC unsupported,
faulting address 0x2d3ba50a885
Dec 01 10:35:42 nc2s5 vnet[2259]: #0 0x0000ffffa7df2e2c 0xffffa7df2e2c
Dec 01 10:35:42 nc2s5 vnet[2259]: #1 0x0000ffffa95ad588 0xffffa95ad588
Dec 01 10:35:42 nc2s5 vnet[2259]: #2 0x0000ffffa7da0090
vlib_node_runtime_sync_stats + 0x0
Dec 01 10:35:42 nc2s5 vnet[2259]: #3 0x0000ffffa7da191c vlib_node_sync_stats +
0x4c
Dec 01 10:35:42 nc2s5 vnet[2259]: #4 0x0000ffffa7dd973c
vlib_worker_thread_barrier_release + 0x45c
Dec 01 10:35:42 nc2s5 vnet[2259]: #5 0x0000ffffa7de6ef4 0xffffa7de6ef4
Dec 01 10:35:42 nc2s5 vnet[2259]: #6 0x0000ffffa7de827c 0xffffa7de827c
Dec 01 10:35:42 nc2s5 vnet[2259]: #7 0x0000ffffa7df00dc 0xffffa7df00dc
Dec 01 10:35:42 nc2s5 vnet[2259]: #8 0x0000ffffa7da5e04 vlib_main + 0x8f4
Dec 01 10:35:42 nc2s5 vnet[2259]: #9 0x0000ffffa7df1d8c 0xffffa7df1d8c
Dec 01 10:35:42 nc2s5 vnet[2259]: #10 0x0000ffffa7c36f8c clib_calljmp + 0x24
Dec 01 10:26:56 nc2s5 vnet[2232]: received signal SIGSEGV, PC unsupported,
faulting address 0x208
Dec 01 10:26:56 nc2s5 vnet[2232]: #0 0x0000ffffa4bebe2c 0xffffa4bebe2c
Dec 01 10:26:56 nc2s5 vnet[2232]: #1 0x0000ffffa63a6588 0xffffa63a6588
Dec 01 10:26:56 nc2s5 vnet[2232]: #2 0x0000ffffa6340aa8 0xffffa6340aa8
Dec 01 10:26:56 nc2s5 vnet[2232]: #3 0x0000ffffa4b9f150 vlib_main + 0xc40
Dec 01 10:26:56 nc2s5 vnet[2232]: #4 0x0000ffffa4bead8c 0xffffa4bead8c
Dec 01 10:26:56 nc2s5 vnet[2232]: #5 0x0000ffffa4a2ff8c clib_calljmp + 0x24
Thread 1 "vpp_main" received signal SIGSEGV, Segmentation fault.
0x0000fffff67500f4 in vlib_node_runtime_update (next_index=<optimized out>,
node_index=518, vm=0xffff363bf700)
at /home/k.lakaev/vpp/vpp-github/src/vlib/node.c:122
122 /home/k.lakaev/vpp/vpp-github/src/vlib/node.c: No such file or
directory.
(gdb) bt full
#0 0x0000fffff67500f4 in vlib_node_runtime_update (next_index=<optimized out>,
node_index=518, vm=0xffff363bf700)
at /home/k.lakaev/vpp/vpp-github/src/vlib/node.c:122
nm = 0xffff363bf8c8
j = <optimized out>
r = <optimized out>
node = <optimized out>
pf = <optimized out>
s = <optimized out>
next_node = <optimized out>
nf = <optimized out>
i = 1501
n_insert = <optimized out>
nm = <optimized out>
r = <optimized out>
s = <optimized out>
node = <optimized out>
next_node = <optimized out>
nf = <optimized out>
pf = <optimized out>
i = <optimized out>
j = <optimized out>
n_insert = <optimized out>
__FUNCTION__ = <optimized out>
#1 vlib_node_add_next_with_slot (vm=0xffff363bf700,
node_index=node_index@entry=518, next_node_index=692, slot=2,
slot@entry=18446744073709551615) at
/home/k.lakaev/vpp/vpp-github/src/vlib/node.c:217
nm = 0xffff363bf8c8
node = 0xffff4a131710
next = 0xffff58bf3e20
old_next = <optimized out>
--Type <RET> for more, q to quit, c to continue without paging--
old_next_index = <optimized out>
p = <optimized out>
__FUNCTION__ = "vlib_node_add_next_with_slot"
#2 0x0000fffff70fe618 in vlib_node_add_next (next_node=<optimized out>,
node=518, vm=<optimized out>)
at /home/k.lakaev/vpp/vpp-github/src/vlib/node_funcs.h:1273
No locals.
#3 vnet_rewrite_init (vnm=vnm@entry=0xfffff7f61528 <vnet_main>,
sw_if_index=sw_if_index@entry=2, linkt=linkt@entry=VNET_LINK_ARP,
this_node=this_node@entry=518, next_node=<optimized out>,
rw=rw@entry=0xffff56b1b480)
at /home/k.lakaev/vpp/vpp-github/src/vnet/adj/rewrite.c:102
No locals.
#4 0x0000fffff70fe7a8 in vnet_rewrite_for_sw_interface (vnm=0xfffff7f61528
<vnet_main>, link_type=VNET_LINK_ARP, sw_if_index=2,
node_index=518, dst_address=0x0, rw=0xffff56b1b480, max_rewrite_bytes=116)
at /home/k.lakaev/vpp/vpp-github/src/vnet/adj/rewrite.c:131
hw = <optimized out>
hc = 0xffff5a804698
rewrite = 0x0
__FUNCTION__ = <optimized out>
#5 0x0000fffff70f67d4 in adj_glean_add_or_lock
(proto=proto@entry=FIB_PROTOCOL_IP4, linkt=linkt@entry=VNET_LINK_IP4,
sw_if_index=<optimized out>, conn=conn@entry=0xffff58c034e8) at
/home/k.lakaev/vpp/vpp-github/src/vnet/adj/adj_glean.c:141
adj = 0xffff56b1b440
ai = 3
__FUNCTION__ = <optimized out>
#6 0x0000fffff70ea4c8 in fib_path_attached_get_adj (path=0xffff58c034d0,
link=<optimized out>, dpo=0xfffb2e231718)
at /home/k.lakaev/vpp/vpp-github/src/vnet/fib/fib_path.c:730
ai = <optimized out>
nh_proto = FIB_PROTOCOL_IP4
#7 0x0000fffff70ed7fc in fib_path_resolve (path_index=20) at
/home/k.lakaev/vpp/vpp-github/src/vnet/fib/fib_path.c:1956
tmp = {{{dpoi_type = DPO_FIRST, dpoi_proto = 7, dpoi_next_node = 0,
dpoi_index = 4294967295}, as_u64 = 18446744069414586112}}
path = 0xffff58c034d0
--Type <RET> for more, q to quit, c to continue without paging--
__FUNCTION__ = <optimized out>
#8 0x0000fffff70e8168 in fib_path_list_paths_add (path_list_index=5,
rpaths=rpaths@entry=0xffff578f5658)
at /home/k.lakaev/vpp/vpp-github/src/vnet/fib/fib_path_list.c:899
new_path_indices = 0xffff58c819a8
path_index = 0xffff58c819a8
rpath = <optimized out>
path_list = 0xffff57990e40
ii = 0
__FUNCTION__ = <optimized out>
#9 0x0000fffff7141554 in mfib_entry_src_paths_add (rpaths=0xffff578f5658,
msrc=0xffff5a80c6b8)
at /home/k.lakaev/vpp/vpp-github/src/vnet/mfib/mfib_entry.c:759
__FUNCTION__ = <optimized out>
#10 mfib_entry_path_update (mfib_entry_index=mfib_entry_index@entry=1,
source=source@entry=MFIB_SOURCE_SPECIAL,
rpaths=rpaths@entry=0xffff578f5658) at
/home/k.lakaev/vpp/vpp-github/src/vnet/mfib/mfib_entry.c:1016
path_indices = <optimized out>
path_index = <optimized out>
rpath = <optimized out>
current_best = MFIB_SOURCE_SPECIAL
path_ext = <optimized out>
pfx = 0xffff56bf724c
mfib_entry = 0xffff56bf7240
msrc = 0xffff5a80c6b8
old = <optimized out>
ii = <optimized out>
__FUNCTION__ = <optimized out>
#11 0x0000fffff714347c in mfib_table_entry_paths_update_i
(rpaths=0xffff578f5658, entry_flags=MFIB_ENTRY_FLAG_NONE,
source=MFIB_SOURCE_SPECIAL, prefix=0xfffff7e46540 <ip4_specials>,
fib_index=0)
at /home/k.lakaev/vpp/vpp-github/src/vnet/mfib/mfib_table.c:319
mfib_entry_index = 1
--Type <RET> for more, q to quit, c to continue without paging--
mfib_table = 0xffff56b0fac0
mfib_entry_index = <optimized out>
mfib_table = <optimized out>
#12 mfib_table_entry_path_update (fib_index=0,
prefix=prefix@entry=0xfffff7e46540 <ip4_specials>,
source=source@entry=MFIB_SOURCE_SPECIAL,
entry_flags=entry_flags@entry=MFIB_ENTRY_FLAG_NONE,
rpath=rpath@entry=0xfffb2e231940)
at /home/k.lakaev/vpp/vpp-github/src/vnet/mfib/mfib_table.c:337
mfib_entry_index = <optimized out>
rpaths = 0xffff578f5658
#13 0x0000fffff7137650 in ip4_mfib_interface_enable_disable
(sw_if_index=sw_if_index@entry=2, is_enable=is_enable@entry=1)
at /home/k.lakaev/vpp/vpp-github/src/vnet/mfib/ip4_mfib.c:158
path = {frp_proto = DPO_PROTO_IP4, {{{frp_addr = {{pad = {0, 0, 0}, ip4
= {data = "\000\000\000", data_u32 = 0,
as_u8 = "\000\000\000", as_u16 = {0, 0}, as_u32 = 0}},
ip6 = {as_u8 = '\000' <repeats 15 times>, as_u16 = {0,
0, 0, 0, 0, 0, 0, 0}, as_u32 = {0, 0, 0, 0}, as_u64 = {0,
0}, as_u128 = {0, 0}, as_uword = {0, 0}},
as_u8 = '\000' <repeats 15 times>, as_u64 = {0, 0}},
{frp_local_label = 0, frp_eos = MPLS_NON_EOS},
frp_bier_imp = 0, frp_connected = {fp_len = 0, fp_proto =
FIB_PROTOCOL_IP4, ___fp___pad = 0 '\000', {fp_addr = {{
pad = {0, 0, 0}, ip4 = {data = "\000\000\000", data_u32
= 0, as_u8 = "\000\000\000", as_u16 = {0, 0},
as_u32 = 0}}, ip6 = {as_u8 = '\000' <repeats 15
times>, as_u16 = {0, 0, 0, 0, 0, 0, 0, 0}, as_u32 = {0, 0,
0, 0}, as_u64 = {0, 0}, as_u128 = {0, 0}, as_uword =
{0, 0}}, as_u8 = '\000' <repeats 15 times>, as_u64 = {
0, 0}}, {fp_label = 0, fp_eos = MPLS_NON_EOS,
fp_payload_proto = DPO_PROTO_IP4}}}}, frp_sw_if_index = 2,
frp_rpf_id = 0, frp_fib_index = 4294967295, frp_label_stack =
0x0, dpo = {{{dpoi_type = DPO_FIRST,
dpoi_proto = DPO_PROTO_IP4, dpoi_next_node = 0, dpoi_index
= 0}, as_u64 = 0}}, frp_mitf_flags = 2},
frp_bier_tbl = {bti_set = 0, bti_sub_domain = 0, bti_ecmp = 0,
bti_hdr_len = BIER_HDR_LEN_64,
bti_type = BIER_TABLE_MPLS_SPF}, frp_udp_encap_id = 0,
frp_classify_table_id = 0, frp_bier_fmask = 0, frp_dpo = {{{
dpoi_type = DPO_FIRST, dpoi_proto = DPO_PROTO_IP4,
dpoi_next_node = 0, dpoi_index = 0}, as_u64 = 0}}},
frp_weight = 1 '\001', frp_preference = 0 '\000', frp_flags =
FIB_ROUTE_PATH_FLAG_NONE}
mfib_index = 0
ii = 0
#14 0x0000fffff6b583c4 in ip4_add_del_interface_address_internal
(sw_if_index=2, address=address@entry=0xfffb2e231af8,
address_length=24, is_del=is_del@entry=0, vm=0xffff363bf700) at
/home/k.lakaev/vpp/vpp-github/src/vnet/ip/ip4_forward.c:808
--Type <RET> for more, q to quit, c to continue without paging--
vnm = 0xfffff7f61528 <vnet_main>
im = 0xfffff7f63a78 <ip4_main>
lm = 0xfffff7f63a78 <ip4_main>
error = <optimized out>
if_address_index = 1
ip4_af = <optimized out>
addr_fib = 0xffff58c81928
cb = <optimized out>
__FUNCTION__ = "ip4_add_del_interface_address_internal"
#15 0x0000fffff6b58734 in ip4_add_del_interface_address
(vm=vm@entry=0xffff363bf700, sw_if_index=<optimized out>,
address=address@entry=0xfffb2e231af8, address_length=<optimized out>,
is_del=is_del@entry=0)
at /home/k.lakaev/vpp/vpp-github/src/vnet/ip/ip4_forward.c:840
No locals.
#16 0x0000fffff6b53d90 in add_del_ip_address (vm=0xffff363bf700,
input=0xfffb2e231fa0, cmd=<optimized out>)
at /home/k.lakaev/vpp/vpp-github/src/vnet/ip/ip46_cli.c:171
vnm = <optimized out>
a4 = {data = "\n33\001", data_u32 = 20132618, as_u8 = "\n33\001",
as_u16 = {13066, 307}, as_u32 = 20132618}
a6 = {as_u8 =
"\000\000\000\000\000\000\000\000\031\000\000\000\000\000\000", as_u16 = {0, 0,
0, 0, 25, 0, 0, 0}, as_u32 = {
0, 0, 25, 0}, as_u64 = {0, 25}, as_u128 = {0, 25}, as_uword = {0,
25}}
error = 0x0
sw_if_index = 2
length = 24
is_del = <optimized out>
__FUNCTION__ = "add_del_ip_address"
#17 0x0000fffff672b0c0 in vlib_cli_dispatch_sub_commands
(vm=vm@entry=0xffff363bf700, input=input@entry=0xfffb2e231fa0,
parent_command_index=<optimized out>, cm=<optimized out>) at
/home/k.lakaev/vpp/vpp-github/src/vlib/cli.c:650
c_error = <optimized out>
si = 0xfffb2e231fa0
has_sub_commands = <optimized out>
--Type <RET> for more, q to quit, c to continue without paging--
vgm = <optimized out>
parent = 0xffff569f7838
c = 0xffff56a05948
error = <optimized out>
sub_input = {buffer = 0xf <error: Cannot access memory at address 0xf>,
index = 4156321, buffer_marks = 0x3f6ba0,
fill_buffer = 0x3f6b80, fill_buffer_arg = 0x23}
string = 0x4086b80000000000 <error: Cannot access memory at address
0x4086b80000000000>
__FUNCTION__ = "vlib_cli_dispatch_sub_commands"
#18 0x0000fffff672b2e8 in vlib_cli_dispatch_sub_commands
(vm=vm@entry=0xffff363bf700, input=input@entry=0xfffb2e231fa0,
parent_command_index=<optimized out>, cm=<optimized out>) at
/home/k.lakaev/vpp/vpp-github/src/vlib/cli.c:607
si = 0xfffb2e231fa0
has_sub_commands = 1
vgm = <optimized out>
parent = 0xffff569ede40
c = 0xffff569f7838
error = 0x0
sub_input = {buffer = 0xf <error: Cannot access memory at address 0xf>,
index = 4156321, buffer_marks = 0x3f6ba0,
fill_buffer = 0x3f6b80, fill_buffer_arg = 0x23}
string = 0x4086b80000000000 <error: Cannot access memory at address
0x4086b80000000000>
__FUNCTION__ = "vlib_cli_dispatch_sub_commands"
#19 0x0000fffff672b2e8 in vlib_cli_dispatch_sub_commands
(vm=vm@entry=0xffff363bf700, input=input@entry=0xfffb2e231fa0,
parent_command_index=<optimized out>, cm=<optimized out>) at
/home/k.lakaev/vpp/vpp-github/src/vlib/cli.c:607
si = 0xfffb2e231fa0
has_sub_commands = 1
vgm = <optimized out>
parent = 0xffff569eb670
c = 0xffff569ede40
error = 0x0
sub_input = {buffer = 0xf <error: Cannot access memory at address 0xf>,
index = 4156321, buffer_marks = 0x3f6ba0,
--Type <RET> for more, q to quit, c to continue without paging--
fill_buffer = 0x3f6b80, fill_buffer_arg = 0x23}
string = 0x4086b80000000000 <error: Cannot access memory at address
0x4086b80000000000>
__FUNCTION__ = "vlib_cli_dispatch_sub_commands"
#20 0x0000fffff672b2e8 in vlib_cli_dispatch_sub_commands
(vm=vm@entry=0xffff363bf700, input=input@entry=0xfffb2e231fa0,
parent_command_index=parent_command_index@entry=0, cm=<optimized out>) at
/home/k.lakaev/vpp/vpp-github/src/vlib/cli.c:607
si = 0xfffb2e231fa0
has_sub_commands = 1
vgm = <optimized out>
parent = 0xffff569eade8
c = 0xffff569eb670
error = 0x0
sub_input = {buffer = 0x0, index = 4644945699809844527, buffer_marks =
0x0, fill_buffer = 0x2d7000002d7,
fill_buffer_arg = 0x0}
string = 0x3f50624dd2f1a9fc <error: Cannot access memory at address
0x3f50624dd2f1a9fc>
__FUNCTION__ = "vlib_cli_dispatch_sub_commands"
#21 0x0000fffff672b85c in vlib_cli_input (vm=0xffff363bf700,
input=input@entry=0xfffb2e231fa0,
function=function@entry=0xfffff679fbb0 <unix_vlib_cli_output>,
function_arg=function_arg@entry=0)
at /home/k.lakaev/vpp/vpp-github/src/vlib/cli.c:753
vgm = <optimized out>
cp = 0xffff58a61000
error = <optimized out>
save_function = 0xfffff679fbb0 <unix_vlib_cli_output>
save_function_arg = 0
rv = 0
#22 0x0000fffff67a13e4 in unix_cli_process_input (cm=0xfffff68edda0
<unix_cli_main>, cli_file_index=<optimized out>)
at /home/k.lakaev/vpp/vpp-github/src/vlib/unix/cli.c:2616
um = <optimized out>
fm = <optimized out>
uf = <optimized out>
--Type <RET> for more, q to quit, c to continue without paging--
cf = <optimized out>
input = {buffer = 0xffff58c81688 "10.51.51.1/24 ", index =
18446744073709551615, buffer_marks = 0xffff58c818e8,
fill_buffer = 0x0, fill_buffer_arg = 0x0}
um = <optimized out>
fm = <optimized out>
uf = <optimized out>
cf = <optimized out>
__FUNCTION__ = <optimized out>
input = <optimized out>
_e = <optimized out>
lv = 0xffff58c4a028 "2022/10/19 16:57:16:354[0]: set interface ip
address TenGigabitEthernet1 10.51.51.1/24 \n"
rv = <optimized out>
expanded = <optimized out>
_e = <optimized out>
_e = <optimized out>
#23 unix_cli_process (vm=<optimized out>, rt=<optimized out>, f=<optimized out>)
at /home/k.lakaev/vpp/vpp-github/src/vlib/unix/cli.c:2745
event_type = <optimized out>
cm = 0xfffff68edda0 <unix_cli_main>
i = <optimized out>
data = <optimized out>
#24 0x0000fffff6744788 in vlib_process_bootstrap (_a=<optimized out>) at
/home/k.lakaev/vpp/vpp-github/src/vlib/main.c:1221
a = <optimized out>
vm = <optimized out>
node = 0xffff58a61000
f = <optimized out>
p = 0xffff58a61000
n = <optimized out>
__FUNCTION__ = <optimized out>
--Type <RET> for more, q to quit, c to continue without paging--
#25 0x0000fffff666cbd8 in clib_calljmp () at
/home/k.lakaev/vpp/vpp-github/src/vppinfra/longjmp.S:809
No locals.
Backtrace stopped: previous frame identical to this frame (corrupt stack?)
(gdb)
(gdb)[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.10.35-00018-gbb124648d42c (root@4b13fa7d6a6c)
(aarch64-linux-gnu-gcc (Linaro GCC 7.4-2019.02) 7.4.1 20181213
[linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4], GNU ld
(Linaro_Binutils-2019.02) 2.28.2.20170706) #1 SMP PREEMPT Wed May 11 17:07:05
UTC 2022
[ 0.000000] Machine model: SolidRun LX2160A Clearfog CX
[ 0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem
0x0000000080000000-0x000000237fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x237e3e6b00-0x237e3e8fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x000000237fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff]
[ 0.000000] node 0: [mem 0x0000002080000000-0x000000237fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000237fffffff]
[ 0.000000] On node 0 totalpages: 3653120
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 507392 pages, LIFO batch:63
[ 0.000000] Normal zone: 49152 pages used for memmap
[ 0.000000] Normal zone: 3145728 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 24 pages/cpu s60120 r8192 d29992 u98304
[ 0.000000] pcpu-alloc: s60120 r8192 d29992 u98304 alloc=24*4096
[ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0]
07
[ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0]
15
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3595776
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyAMA0,115200
earlycon=pl011,mmio32,0x21c0000 default_hugepagesz=1G hugepagesz=1G hugepages=4
hugepagesz=2M hugepages=2048 iommu.passthrough=1 pci=pcie_bus_perf
root=PARTUUID=30303030-01 rw rootwait
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216
bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608
bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem
0x00000000f5c00000-0x00000000f9c00000] (64MB)
[ 0.000000] Memory: 9991004K/14612480K available (21056K kernel code, 3080K
rwdata, 10060K rodata, 6720K init, 1039K bss, 4588708K reserved, 32768K
cma-reserved)
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25
jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
[ 0.000000] ITS [mem 0x06020000-0x0603ffff]
[ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080080000
(flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: Using preallocated redistributor tables
[ 0.000000] GICv3: using LPI property table @0x0000000080000000
[ 0.000000] GICv3: CPU0: using reserved LPI pending table @0x0000000080010000
[ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4f4
with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
[ 0.000002] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every
4398046511103ns
[ 0.008667] Console: colour dummy device 80x25
[ 0.013205] Calibrating delay loop (skipped), value calculated using timer
frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023673] pid_max: default: 32768 minimum: 301
[ 0.028404] LSM: Security Framework initializing
[ 0.033171] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes,
linear)
[ 0.040868] Mountpoint-cache hash table entries: 32768 (order: 6, 262144
bytes, linear)
[ 0.049678] rcu: Hierarchical SRCU implementation.
[ 0.054619] Platform MSI: gic-its@6020000 domain created
[ 0.060050] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain
created
[ 0.067655] fsl-mc MSI: gic-its@6020000 domain created
[ 0.073681] EFI services will not be available.
[ 0.078563] smp: Bringing up secondary CPUs ...
[ 0.083449] Detected PIPT I-cache on CPU1
[ 0.083470] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
[ 0.083494] GICv3: CPU1: using reserved LPI pending table @0x0000000080020000
[ 0.083527] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.083860] Detected PIPT I-cache on CPU2
[ 0.083879] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
[ 0.083902] GICv3: CPU2: using reserved LPI pending table @0x0000000080030000
[ 0.083941] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.084292] Detected PIPT I-cache on CPU3
[ 0.084308] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
[ 0.084328] GICv3: CPU3: using reserved LPI pending table @0x0000000080040000
[ 0.084358] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.084672] Detected PIPT I-cache on CPU4
[ 0.084693] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
[ 0.084713] GICv3: CPU4: using reserved LPI pending table @0x0000000080050000
[ 0.084746] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
[ 0.085077] Detected PIPT I-cache on CPU5
[ 0.085096] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
[ 0.085114] GICv3: CPU5: using reserved LPI pending table @0x0000000080060000
[ 0.085139] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
[ 0.085448] Detected PIPT I-cache on CPU6
[ 0.085472] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
[ 0.085491] GICv3: CPU6: using reserved LPI pending table @0x0000000080070000
[ 0.085523] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
[ 0.085845] Detected PIPT I-cache on CPU7
[ 0.085867] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
[ 0.085885] GICv3: CPU7: using reserved LPI pending table @0x0000000080080000
[ 0.085904] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
[ 0.086212] Detected PIPT I-cache on CPU8
[ 0.086240] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
[ 0.086252] GICv3: CPU8: using reserved LPI pending table @0x0000000080090000
[ 0.086285] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
[ 0.086589] Detected PIPT I-cache on CPU9
[ 0.086615] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
[ 0.086625] GICv3: CPU9: using reserved LPI pending table @0x00000000800a0000
[ 0.086645] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
[ 0.086950] Detected PIPT I-cache on CPU10
[ 0.086970] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
[ 0.086983] GICv3: CPU10: using reserved LPI pending table
@0x00000000800b0000
[ 0.087015] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
[ 0.087332] Detected PIPT I-cache on CPU11
[ 0.087350] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
[ 0.087360] GICv3: CPU11: using reserved LPI pending table
@0x00000000800c0000
[ 0.087379] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
[ 0.087683] Detected PIPT I-cache on CPU12
[ 0.087705] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
[ 0.087718] GICv3: CPU12: using reserved LPI pending table
@0x00000000800d0000
[ 0.087750] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
[ 0.088046] Detected PIPT I-cache on CPU13
[ 0.088064] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
[ 0.088075] GICv3: CPU13: using reserved LPI pending table
@0x00000000800e0000
[ 0.088095] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
[ 0.088383] Detected PIPT I-cache on CPU14
[ 0.088407] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
[ 0.088419] GICv3: CPU14: using reserved LPI pending table
@0x00000000800f0000
[ 0.088447] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
[ 0.088743] Detected PIPT I-cache on CPU15
[ 0.088763] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
[ 0.088773] GICv3: CPU15: using reserved LPI pending table
@0x0000000080100000
[ 0.088793] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
[ 0.088832] smp: Brought up 1 node, 16 CPUs
[ 0.469559] SMP: Total of 16 processors activated.
[ 0.474402] CPU features: detected: 32-bit EL0 Support
[ 0.479598] CPU features: detected: CRC32 instructions
[ 0.484791] CPU features: detected: 32-bit EL1 Support
[ 0.504493] CPU: All CPU(s) started at EL2
[ 0.508661] alternatives: patching kernel code
[ 0.513903] devtmpfs: initialized
[ 0.520144] KASLR enabled
[ 0.522868] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.532724] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.540176] pinctrl core: initialized pinctrl subsystem
[ 0.545933] DMI not present or invalid.
[ 0.550051] NET: Registered protocol family 16
[ 0.555399] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[ 0.562918] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic
allocations
[ 0.571276] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic
allocations
[ 0.579384] audit: initializing netlink subsys (disabled)
[ 0.584920] audit: type=2000 audit(0.380:1): state=initialized
audit_enabled=0 res=1
[ 0.585344] thermal_sys: Registered thermal governor 'step_wise'
[ 0.592754] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.599240] cpuidle: using governor menu
[ 0.610035] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.617041] ASID allocator initialised with 32768 entries
[ 0.623088] Serial: AMBA PL011 UART driver
[ 0.627267] imx mu driver is registered.
[ 0.631243] imx rpmsg driver is registered.
[ 0.644192] Machine: SolidRun LX2160A Clearfog CX
[ 0.648946] SoC family: QorIQ LX2160A
[ 0.652639] SoC ID: svr:0x87360020, Revision: 2.0
[ 0.657935] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 25, base_baud =
0) is a SBSA
[ 0.666208] printk: console [ttyAMA0] enabled
[ 0.674949] printk: bootconsole [pl11] disabled
[ 0.684254] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 26, base_baud =
0) is a SBSA
[ 0.694832] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.32.0
[ 0.703810] fsl_mc_dprc dprc.1: DMA mask not set
[ 0.744391] HugeTLB registered 1.00 GiB page size, pre-allocated 4 pages
[ 0.751092] HugeTLB registered 2.00 MiB page size, pre-allocated 2048 pages
[ 0.758043] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.764733] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.772287] cryptd: max_cpu_qlen set to 1000
[ 0.842939] raid6: neonx8 gen() 6034 MB/s
[ 0.914970] raid6: neonx8 xor() 4156 MB/s
[ 0.986997] raid6: neonx4 gen() 5927 MB/s
[ 1.059039] raid6: neonx4 xor() 4257 MB/s
[ 1.131057] raid6: neonx2 gen() 5162 MB/s
[ 1.203086] raid6: neonx2 xor() 4038 MB/s
[ 1.275118] raid6: neonx1 gen() 3972 MB/s
[ 1.347146] raid6: neonx1 xor() 3197 MB/s
[ 1.419180] raid6: int64x8 gen() 3004 MB/s
[ 1.491202] raid6: int64x8 xor() 1788 MB/s
[ 1.563232] raid6: int64x4 gen() 3529 MB/s
[ 1.635261] raid6: int64x4 xor() 1940 MB/s
[ 1.707291] raid6: int64x2 gen() 3140 MB/s
[ 1.779321] raid6: int64x2 xor() 1690 MB/s
[ 1.851346] raid6: int64x1 gen() 2438 MB/s
[ 1.923383] raid6: int64x1 xor() 1278 MB/s
[ 1.927642] raid6: using algorithm neonx8 gen() 6034 MB/s
[ 1.933029] raid6: .... xor() 4156 MB/s, rmw enabled
[ 1.937982] raid6: using neon recovery algorithm
[ 1.942851] ACPI: Interpreter disabled.
[ 1.947499] iommu: Default domain type: Passthrough (set via kernel command
line)
[ 1.955060] vgaarb: loaded
[ 1.957896] SCSI subsystem initialized
[ 1.961697] libata version 3.00 loaded.
[ 1.961781] usbcore: registered new interface driver usbfs
[ 1.967272] usbcore: registered new interface driver hub
[ 1.972591] usbcore: registered new device driver usb
[ 1.977854] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not
supported
[ 1.985250] i2c i2c-0: IMX I2C adapter registered
[ 1.990073] imx-i2c 2020000.i2c: can't get pinctrl, bus recovery not
supported
[ 1.997335] i2c i2c-1: IMX I2C adapter registered
[ 2.002111] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not
supported
[ 2.009410] i2c i2c-2: IMX I2C adapter registered
[ 2.014369] mc: Linux media interface: v0.10
[ 2.018638] videodev: Linux video capture interface: v2.00
[ 2.024149] pps_core: LinuxPPS API ver. 1 registered
[ 2.029105] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giome...@linux.it>
[ 2.038237] PTP clock support registered
[ 2.042198] EDAC MC: Ver: 3.0.0
[ 2.045870] No BMan portals available!
[ 2.049778] QMan: Allocated lookup table at (____ptrval____), entry count
65537
[ 2.057191] No QMan portals available!
[ 2.061093] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
[ 2.067335] FPGA manager framework
[ 2.070764] Advanced Linux Sound Architecture Driver Initialized.
[ 2.077478] clocksource: Switched to clocksource arch_sys_counter
[ 2.083655] VFS: Disk quotas dquot_6.6.0
[ 2.087601] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.094545] pnp: PnP ACPI: disabled
[ 2.100770] NET: Registered protocol family 2
[ 2.105385] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5,
131072 bytes, linear)
[ 2.114091] TCP established hash table entries: 131072 (order: 8, 1048576
bytes, linear)
[ 2.122574] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes,
linear)
[ 2.130371] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.137069] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 2.144003] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes,
linear)
[ 2.151452] NET: Registered protocol family 1
[ 2.155989] RPC: Registered named UNIX socket transport module.
[ 2.161914] RPC: Registered udp transport module.
[ 2.166609] RPC: Registered tcp transport module.
[ 2.171304] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.177738] PCI: CLS 0 bytes, default 64
[ 2.182527] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7
counters available
[ 2.190856] kvm [1]: IPA Size Limit: 44 bits
[ 2.195746] kvm [1]: vgic-v2@c0e0000
[ 2.199328] kvm [1]: GIC system register CPU interface enabled
[ 2.205343] kvm [1]: vgic interrupt IRQ9
[ 2.209455] kvm [1]: Hyp mode initialized successfully
[ 2.216614] workingset: timestamp_bits=42 max_order=22 bucket_order=0
[ 2.223465] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.229440] NFS: Registering the id_resolver key type
[ 2.234496] Key type id_resolver registered
[ 2.238670] Key type id_legacy registered
[ 2.242683] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.249374] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver
Registering...
[ 2.256767] jffs2: version 2.2. (NAND) \xc2\xa9 2001-2006 Red Hat, Inc.
[ 2.262961] fuse: init (API version 7.32)
[ 2.267024] 9p: Installing v9fs 9p2000 file system support
[ 2.292047] NET: Registered protocol family 38
[ 2.296492] xor: measuring software checksum speed
[ 2.302377] 8regs : 8951 MB/sec
[ 2.307809] 32regs : 9065 MB/sec
[ 2.313279] arm64_neon : 8769 MB/sec
[ 2.317625] xor: using function: 32regs (9065 MB/sec)
[ 2.322681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
243)
[ 2.330117] io scheduler mq-deadline registered
[ 2.334643] io scheduler kyber registered
[ 2.340436] serdes-28g 1ea0000.serdes_phy: PLLF: disabled, unlocked
[ 2.346700] serdes-28g 1ea0000.serdes_phy: Reference clock: 100MHz
[ 2.352957] serdes-28g 1ea0000.serdes_phy: clock net: 5GHz
[ 2.358520] serdes-28g 1ea0000.serdes_phy: Supported interfaces:
[ 2.364603] serdes-28g 1ea0000.serdes_phy: sgmii
[ 2.369386] serdes-28g 1ea0000.serdes_phy: qsgmii
[ 2.374255] serdes-28g 1ea0000.serdes_phy: 1000base-x
[ 2.379472] serdes-28g 1ea0000.serdes_phy: PLLS: enabled, locked
[ 2.385470] serdes-28g 1ea0000.serdes_phy: Reference clock: 161.1328125MHz
[ 2.392421] serdes-28g 1ea0000.serdes_phy: clock net: 10.3125GHz
[ 2.398506] serdes-28g 1ea0000.serdes_phy: Supported interfaces:
[ 2.404588] serdes-28g 1ea0000.serdes_phy: 10gbase-r
[ 2.409717] serdes-28g 1ea0000.serdes_phy: usxgmii
[ 2.414711] serdes-28g 1ea0000.serdes_phy: created PHY for lane #0
[ 2.420907] serdes-28g 1ea0000.serdes_phy: created PHY for lane #1
[ 2.427104] serdes-28g 1ea0000.serdes_phy: created PHY for lane #2
[ 2.433301] serdes-28g 1ea0000.serdes_phy: created PHY for lane #3
[ 2.439498] serdes-28g 1ea0000.serdes_phy: created PHY for lane #4
[ 2.445694] serdes-28g 1ea0000.serdes_phy: created PHY for lane #5
[ 2.451890] serdes-28g 1ea0000.serdes_phy: created PHY for lane #6
[ 2.458085] serdes-28g 1ea0000.serdes_phy: created PHY for lane #7
[ 2.464304] serdes-28g 1eb0000.serdes_phy: PLLF: enabled, locked
[ 2.470303] serdes-28g 1eb0000.serdes_phy: Reference clock: 100MHz
[ 2.476562] serdes-28g 1eb0000.serdes_phy: clock net: 5GHz
[ 2.482126] serdes-28g 1eb0000.serdes_phy: Supported interfaces:
[ 2.488209] serdes-28g 1eb0000.serdes_phy: sgmii
[ 2.492991] serdes-28g 1eb0000.serdes_phy: qsgmii
[ 2.497860] serdes-28g 1eb0000.serdes_phy: 1000base-x
[ 2.503076] serdes-28g 1eb0000.serdes_phy: PLLS: enabled, locked
[ 2.509074] serdes-28g 1eb0000.serdes_phy: Reference clock: 100MHz
[ 2.515332] serdes-28g 1eb0000.serdes_phy: Supported interfaces:
[ 2.521444] serdes-28g 1eb0000.serdes_phy: created PHY for lane #0
[ 2.527639] serdes-28g 1eb0000.serdes_phy: created PHY for lane #1
[ 2.533834] serdes-28g 1eb0000.serdes_phy: created PHY for lane #2
[ 2.540032] serdes-28g 1eb0000.serdes_phy: created PHY for lane #3
[ 2.546229] serdes-28g 1eb0000.serdes_phy: created PHY for lane #4
[ 2.552424] serdes-28g 1eb0000.serdes_phy: created PHY for lane #5
[ 2.558620] serdes-28g 1eb0000.serdes_phy: created PHY for lane #6
[ 2.564817] serdes-28g 1eb0000.serdes_phy: created PHY for lane #7
[ 2.574077] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000
ranges:
[ 2.581390] layerscape-pcie 3600000.pcie: MEM
0x9040000000..0x907fffffff -> 0x0040000000
[ 2.589987] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0000:00
[ 2.596682] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.602161] pci_bus 0000:00: root bus resource [mem
0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff])
[ 2.612691] pci 0000:00:00.0: [1957:8d80] type 01 class 0x060400
[ 2.618750] pci 0000:00:00.0: supports D1 D2
[ 2.623011] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.630769] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 2.636000] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128),
Max Read Rq 256
[ 2.644540] layerscape-pcie 3800000.pcie: host bridge /soc/pcie@3800000
ranges:
[ 2.651865] layerscape-pcie 3800000.pcie: MEM
0xa040000000..0xa07fffffff -> 0x0040000000
[ 2.660467] layerscape-pcie 3800000.pcie: PCI host bridge to bus 0001:00
[ 2.667161] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 2.672639] pci_bus 0001:00: root bus resource [mem
0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff])
[ 2.683166] pci 0001:00:00.0: [1957:8d80] type 01 class 0x060400
[ 2.689237] pci 0001:00:00.0: supports D1 D2
[ 2.693499] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 2.701209] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 2.706443] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128),
Max Read Rq 256
[ 2.715457] EINJ: ACPI disabled.
[ 2.722094] Bus freq driver module loaded
[ 2.729243] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.736463] SuperH (H)SCI(F) driver initialized
[ 2.741217] msm_serial: driver initialized
[ 2.746160] arm-smmu 5000000.iommu: probing hardware configuration...
[ 2.752594] arm-smmu 5000000.iommu: SMMUv2 with:
[ 2.757202] arm-smmu 5000000.iommu: stage 1 translation
[ 2.762504] arm-smmu 5000000.iommu: stage 2 translation
[ 2.767805] arm-smmu 5000000.iommu: nested translation
[ 2.773020] arm-smmu 5000000.iommu: coherent table walk
[ 2.778322] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW
configuration)
[ 2.785626] arm-smmu 5000000.iommu: stream matching with 128 register groups
[ 2.792753] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only)
[ 2.799273] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000
[ 2.805703] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
[ 2.812133] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA
[ 2.824549] brd: module loaded
[ 2.831942] loop: module loaded
[ 2.835215] pci-endpoint-test 0000:00:00.0: Adding to iommu group 0
[ 2.841579] pci-endpoint-test 0001:00:00.0: Adding to iommu group 1
[ 2.848296] megasas: 07.714.04.00-rc1
[ 2.852557] imx ahci driver is registered.
[ 2.856820] ahci-qoriq 3200000.sata: supply ahci not found, using dummy
regulator
[ 2.864342] ahci-qoriq 3200000.sata: supply phy not found, using dummy
regulator
[ 2.871753] ahci-qoriq 3200000.sata: supply target not found, using dummy
regulator
[ 2.879461] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x1 impl platform mode
[ 2.888413] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 2.898500] scsi host0: ahci-qoriq
[ 2.902035] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port
0x100 irq 33
[ 2.910004] ahci-qoriq 3210000.sata: supply ahci not found, using dummy
regulator
[ 2.917520] ahci-qoriq 3210000.sata: supply phy not found, using dummy
regulator
[ 2.924929] ahci-qoriq 3210000.sata: supply target not found, using dummy
regulator
[ 2.932625] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x1 impl platform mode
[ 2.941576] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 2.951484] scsi host1: ahci-qoriq
[ 2.954952] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port
0x100 irq 34
[ 2.962911] ahci-qoriq 3220000.sata: supply ahci not found, using dummy
regulator
[ 2.970427] ahci-qoriq 3220000.sata: supply phy not found, using dummy
regulator
[ 2.977832] ahci-qoriq 3220000.sata: supply target not found, using dummy
regulator
[ 2.985528] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x1 impl platform mode
[ 2.994508] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 3.004432] scsi host2: ahci-qoriq
[ 3.007902] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port
0x100 irq 35
[ 3.015864] ahci-qoriq 3230000.sata: supply ahci not found, using dummy
regulator
[ 3.023381] ahci-qoriq 3230000.sata: supply phy not found, using dummy
regulator
[ 3.030786] ahci-qoriq 3230000.sata: supply target not found, using dummy
regulator
[ 3.038483] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps
0x1 impl platform mode
[ 3.047434] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp
fbs pio slum part ccc sds apst
[ 3.057341] scsi host3: ahci-qoriq
[ 3.060809] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port
0x100 irq 36
[ 3.069961] spi-nor spi0.0: found mt35xu512aba, expected m25p80
[ 3.075905] spi-nor spi0.0: mt35xu512aba (65536 Kbytes)
[ 3.094829] libphy: Fixed MDIO Bus: probed
[ 3.099692] tun: Universal TUN/TAP device driver, 1.6
[ 3.105074] thunder_xcv, ver 1.0
[ 3.108322] thunder_bgx, ver 1.0
[ 3.111554] nicpf, ver 1.0
[ 3.114536] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.120155] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.125265] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.130547] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.135846] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.141129] libphy: Freescale XGMAC MDIO Bus: probed
[ 3.146332] Freescale FM module, FMD API version 21.1.0
[ 3.151620] Freescale FM Ports module
[ 3.155286] fsl_mac: fsl_mac: FSL FMan MAC API based driver
[ 3.160902] fsl_dpa: FSL DPAA Ethernet driver
[ 3.165288] fsl_advanced: FSL DPAA Advanced drivers:
[ 3.170243] fsl_proxy: FSL DPAA Proxy initialization driver
[ 3.175844] fsl_oh: FSL FMan Offline Parsing port driver
[ 3.181487] hclge is initializing
[ 3.184804] hns3: Hisilicon Ethernet Network Driver for Hip08 Family -
version
[ 3.192015] hns3: Copyright (c) 2017 Huawei Corporation.
[ 3.197338] e1000: Intel(R) PRO/1000 Network Driver
[ 3.202206] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.207959] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.212914] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.218842] igb: Intel(R) Gigabit Ethernet Network Driver
[ 3.223625] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.224231] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.235201] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 3.241463] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.247393] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 3.253653] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 3.259547] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
[ 3.266591] Copyright (c) 2013 - 2018 Intel Corporation.
[ 3.272081] sky2: driver version 1.30
[ 3.275629] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.276192] usbcore: registered new interface driver r8152
[ 3.286609] usbcore: registered new interface driver asix
[ 3.292013] usbcore: registered new interface driver ax88179_178a
[ 3.298114] usbcore: registered new interface driver cdc_ether
[ 3.303947] usbcore: registered new interface driver net1080
[ 3.309608] usbcore: registered new interface driver cdc_subset
[ 3.315531] usbcore: registered new interface driver zaurus
[ 3.321109] usbcore: registered new interface driver cdc_ncm
[ 3.326980] VFIO - User Level meta-driver version: 0.3
[ 3.327628] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.333584] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.344019] ehci-pci: EHCI PCI platform driver
[ 3.348468] ehci-platform: EHCI generic platform driver
[ 3.353736] ehci-orion: EHCI orion driver
[ 3.357780] ehci-exynos: EHCI Exynos driver
[ 3.361993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.368168] ohci-pci: OHCI PCI platform driver
[ 3.372618] ohci-platform: OHCI generic platform driver
[ 3.377882] ohci-exynos: OHCI Exynos driver
[ 3.382247] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.383618] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.387733] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 1
[ 3.400828] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version
0x100 quirks 0x0000000002010810
[ 3.410230] xhci-hcd xhci-hcd.0.auto: irq 31, io mem 0x03100000
[ 3.416441] hub 1-0:1.0: USB hub found
[ 3.420196] hub 1-0:1.0: 1 port detected
[ 3.424223] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.429703] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus
number 2
[ 3.437355] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.444069] hub 2-0:1.0: USB hub found
[ 3.447822] hub 2-0:1.0: 1 port detected
[ 3.451890] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.457373] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus
number 3
[ 3.465076] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version
0x100 quirks 0x0000000002010810
[ 3.474475] xhci-hcd xhci-hcd.1.auto: irq 32, io mem 0x03110000
[ 3.480626] hub 3-0:1.0: USB hub found
[ 3.484380] hub 3-0:1.0: 1 port detected
[ 3.488398] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.493879] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus
number 4
[ 3.501529] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 3.508238] hub 4-0:1.0: USB hub found
[ 3.511990] hub 4-0:1.0: 1 port detected
[ 3.516137] usbcore: registered new interface driver cdc_acm
[ 3.521789] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 3.529859] usbcore: registered new interface driver uas
[ 3.535200] usbcore: registered new interface driver usb-storage
[ 3.541231] usbcore: registered new interface driver usbserial_generic
[ 3.547756] usbserial: USB Serial support registered for generic
[ 3.553771] usbcore: registered new interface driver ftdi_sio
[ 3.559514] usbserial: USB Serial support registered for FTDI USB Serial
Device
[ 3.566856] usbcore: registered new interface driver usb_serial_simple
[ 3.573380] usbserial: USB Serial support registered for carelink
[ 3.579470] usbserial: USB Serial support registered for zio
[ 3.585127] usbserial: USB Serial support registered for funsoft
[ 3.591139] usbserial: USB Serial support registered for flashloader
[ 3.597489] usbserial: USB Serial support registered for google
[ 3.603406] usbserial: USB Serial support registered for libtransistor
[ 3.609930] usbserial: USB Serial support registered for vivopay
[ 3.615933] usbserial: USB Serial support registered for moto_modem
[ 3.622199] usbserial: USB Serial support registered for motorola_tetra
[ 3.628810] usbserial: USB Serial support registered for novatel_gps
[ 3.635160] usbserial: USB Serial support registered for hp4x
[ 3.640902] usbserial: USB Serial support registered for suunto
[ 3.646818] usbserial: USB Serial support registered for siemens_mpi
[ 3.654505] ftm-alarm 2800000.timer: registered as rtc1
[ 3.660124] i2c /dev entries driver
[ 3.665154] i2c i2c-0: Added multiplexed i2c bus 3
[ 3.670079] i2c i2c-0: Added multiplexed i2c bus 4
[ 3.675000] i2c i2c-0: Added multiplexed i2c bus 5
[ 3.679946] i2c i2c-0: Added multiplexed i2c bus 6
[ 3.684813] i2c i2c-0: Added multiplexed i2c bus 7
[ 3.689677] i2c i2c-0: Added multiplexed i2c bus 8
[ 3.694542] i2c i2c-0: Added multiplexed i2c bus 9
[ 3.699407] i2c i2c-0: Added multiplexed i2c bus 10
[ 3.704281] pca954x 0-0077: registered 8 multiplexed busses for I2C mux
pca9547
[ 3.716479] amc6821 4-0018: Revision 3
[ 3.751539] random: fast init done
[ 3.821481] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[ 4.020091] hub 3-1:1.0: USB hub found
[ 4.023857] hub 3-1:1.0: 4 ports detected
[ 4.101501] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.137089] sbsa-gwdt 23a0000.watchdog: Initialized with 30s timeout @
25000050 Hz, action=0. [enabled]
[ 4.148698] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency
scaling driver
[ 4.157420] sdhci: Secure Digital Host Controller Interface driver
[ 4.163614] sdhci: Copyright(c) Pierre Ossman
[ 4.168210] Synopsys Designware Multimedia Card Interface Driver
[ 4.174638] sdhci-pltfm: SDHCI platform and OF driver helper
[ 4.180142] hub 4-1:1.0: USB hub found
[ 4.184099] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.184285] hub 4-1:1.0: 4 ports detected
[ 4.190406] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 4.200718] usbcore: registered new interface driver usbhid
[ 4.206284] usbhid: USB HID core driver
[ 4.206657] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using
ADMA 64-bit
[ 4.206669] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using
ADMA 64-bit
[ 4.210728] No fsl,qman node
[ 4.228642] Freescale USDPAA process driver
[ 4.232815] fsl-usdpaa: no region found
[ 4.236647] Freescale USDPAA process IRQ driver
[ 4.242955] optee: probing for conduit method.
[ 4.247405] optee: api uid mismatch
[ 4.250892] optee: probe of firmware:optee failed with error -22
[ 4.259711] pktgen: Packet Generator for packet performance testing.
Version: 2.75
[ 4.268789] NET: Registered protocol family 26
[ 4.273243] u32 classifier
[ 4.275950] input device check on
[ 4.279604] Actions configured
[ 4.283421] Initializing XFRM netlink socket
[ 4.287739] NET: Registered protocol family 10
[ 4.292492] Segment Routing with IPv6
[ 4.296192] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 4.302305] NET: Registered protocol family 17
[ 4.306756] NET: Registered protocol family 15
[ 4.311213] Bridge firewalling registered
[ 4.313742] mmc1: new HS400 MMC card at address 0001
[ 4.315359] 8021q: 802.1Q VLAN Support v1.8
[ 4.320497] mmcblk1: mmc1:0001 DG4064 59.2 GiB
[ 4.324359] lib80211: common routines for IEEE802.11 drivers
[ 4.329024] mmcblk1boot0: mmc1:0001 DG4064 partition 1 4.00 MiB
[ 4.334526] lib80211_crypt: registered algorithm 'NULL'
[ 4.340442] lib80211_crypt: registered algorithm 'WEP'
[ 4.340445] lib80211_crypt: registered algorithm 'CCMP'
[ 4.340447] lib80211_crypt: registered algorithm 'TKIP'
[ 4.340471] 9pnet: Installing 9P2000 support
[ 4.340585] mmcblk1boot1: mmc1:0001 DG4064 partition 2 4.00 MiB
[ 4.344757] tsn generic netlink module v1 init...
[ 4.350722] mmcblk1rpmb: mmc1:0001 DG4064 partition 3 4.00 MiB, chardev
(507:0)
[ 4.355376] Key type dns_resolver registered
[ 4.364607] mmcblk1: p1
[ 4.367148] registered taskstats version 1
[ 4.374322] Btrfs loaded, crc32c=crc32c-generic
[ 4.377487] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
[ 4.380541] fsl_mc_dprc dprc.1: Adding to iommu group 2
[ 4.389679] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ 4.397745] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
[ 4.404895] mmcblk0: p1
[ 4.444598] fsl_mc_allocator dpbp.1: Adding to iommu group 2
[ 4.450332] fsl_mc_allocator dpbp.0: Adding to iommu group 2
[ 4.457059] fsl_mc_allocator dpmcp.35: Adding to iommu group 2
[ 4.463455] fsl_mc_allocator dpmcp.34: Adding to iommu group 2
[ 4.469854] fsl_mc_allocator dpmcp.33: Adding to iommu group 2
[ 4.476250] fsl_mc_allocator dpmcp.32: Adding to iommu group 2
[ 4.482655] fsl_mc_allocator dpmcp.31: Adding to iommu group 2
[ 4.489058] fsl_mc_allocator dpmcp.30: Adding to iommu group 2
[ 4.495455] fsl_mc_allocator dpmcp.29: Adding to iommu group 2
[ 4.501859] fsl_mc_allocator dpmcp.28: Adding to iommu group 2
[ 4.508253] fsl_mc_allocator dpmcp.27: Adding to iommu group 2
[ 4.514647] fsl_mc_allocator dpmcp.26: Adding to iommu group 2
[ 4.521042] fsl_mc_allocator dpmcp.25: Adding to iommu group 2
[ 4.527435] fsl_mc_allocator dpmcp.24: Adding to iommu group 2
[ 4.532078] hub 3-1.3:1.0: USB hub found
[ 4.533838] fsl_mc_allocator dpmcp.23: Adding to iommu group 2
[ 4.537224] hub 3-1.3:1.0: 4 ports detected
[ 4.543560] fsl_mc_allocator dpmcp.22: Adding to iommu group 2
[ 4.553562] fsl_mc_allocator dpmcp.21: Adding to iommu group 2
[ 4.559960] fsl_mc_allocator dpmcp.20: Adding to iommu group 2
[ 4.566356] fsl_mc_allocator dpmcp.19: Adding to iommu group 2
[ 4.572751] fsl_mc_allocator dpmcp.18: Adding to iommu group 2
[ 4.579143] fsl_mc_allocator dpmcp.17: Adding to iommu group 2
[ 4.585554] fsl_mc_allocator dpmcp.16: Adding to iommu group 2
[ 4.591956] fsl_mc_allocator dpmcp.15: Adding to iommu group 2
[ 4.598358] fsl_mc_allocator dpmcp.14: Adding to iommu group 2
[ 4.604752] fsl_mc_allocator dpmcp.13: Adding to iommu group 2
[ 4.611148] fsl_mc_allocator dpmcp.12: Adding to iommu group 2
[ 4.617548] fsl_mc_allocator dpmcp.11: Adding to iommu group 2
[ 4.623943] fsl_mc_allocator dpmcp.10: Adding to iommu group 2
[ 4.630342] fsl_mc_allocator dpmcp.9: Adding to iommu group 2
[ 4.636651] fsl_mc_allocator dpmcp.8: Adding to iommu group 2
[ 4.642960] fsl_mc_allocator dpmcp.7: Adding to iommu group 2
[ 4.649270] fsl_mc_allocator dpmcp.6: Adding to iommu group 2
[ 4.655580] fsl_mc_allocator dpmcp.5: Adding to iommu group 2
[ 4.661903] fsl_mc_allocator dpmcp.4: Adding to iommu group 2
[ 4.668212] fsl_mc_allocator dpmcp.3: Adding to iommu group 2
[ 4.674522] fsl_mc_allocator dpmcp.2: Adding to iommu group 2
[ 4.680831] fsl_mc_allocator dpmcp.1: Adding to iommu group 2
[ 4.686643] fsl_mc_allocator dpcon.31: Adding to iommu group 2
[ 4.692546] fsl_mc_allocator dpcon.30: Adding to iommu group 2
[ 4.698448] fsl_mc_allocator dpcon.29: Adding to iommu group 2
[ 4.704343] fsl_mc_allocator dpcon.28: Adding to iommu group 2
[ 4.710240] fsl_mc_allocator dpcon.27: Adding to iommu group 2
[ 4.716134] fsl_mc_allocator dpcon.26: Adding to iommu group 2
[ 4.722030] fsl_mc_allocator dpcon.25: Adding to iommu group 2
[ 4.727926] fsl_mc_allocator dpcon.24: Adding to iommu group 2
[ 4.733823] fsl_mc_allocator dpcon.23: Adding to iommu group 2
[ 4.739719] fsl_mc_allocator dpcon.22: Adding to iommu group 2
[ 4.745617] fsl_mc_allocator dpcon.21: Adding to iommu group 2
[ 4.751514] fsl_mc_allocator dpcon.20: Adding to iommu group 2
[ 4.757412] fsl_mc_allocator dpcon.19: Adding to iommu group 2
[ 4.763307] fsl_mc_allocator dpcon.18: Adding to iommu group 2
[ 4.769204] fsl_mc_allocator dpcon.17: Adding to iommu group 2
[ 4.775101] fsl_mc_allocator dpcon.16: Adding to iommu group 2
[ 4.780999] fsl_mc_allocator dpcon.15: Adding to iommu group 2
[ 4.786897] fsl_mc_allocator dpcon.14: Adding to iommu group 2
[ 4.792795] fsl_mc_allocator dpcon.13: Adding to iommu group 2
[ 4.798701] fsl_mc_allocator dpcon.12: Adding to iommu group 2
[ 4.804599] fsl_mc_allocator dpcon.11: Adding to iommu group 2
[ 4.810497] fsl_mc_allocator dpcon.10: Adding to iommu group 2
[ 4.816396] fsl_mc_allocator dpcon.9: Adding to iommu group 2
[ 4.822216] fsl_mc_allocator dpcon.8: Adding to iommu group 2
[ 4.828027] fsl_mc_allocator dpcon.7: Adding to iommu group 2
[ 4.833839] fsl_mc_allocator dpcon.6: Adding to iommu group 2
[ 4.839650] fsl_mc_allocator dpcon.5: Adding to iommu group 2
[ 4.845462] fsl_mc_allocator dpcon.4: Adding to iommu group 2
[ 4.851286] fsl_mc_allocator dpcon.3: Adding to iommu group 2
[ 4.857099] fsl_mc_allocator dpcon.2: Adding to iommu group 2
[ 4.862913] fsl_mc_allocator dpcon.1: Adding to iommu group 2
[ 4.868724] fsl_mc_allocator dpcon.0: Adding to iommu group 2
[ 4.874539] fsl_dpaa2_eth dpni.0: Adding to iommu group 2
[ 4.968281] fsl_dpaa2_mac dpmac.17: Adding to iommu group 2
[ 4.975456] fsl_dpaa2_mac dpmac.10: Adding to iommu group 2
[ 4.986274] fsl_dpaa2_mac dpmac.9: Adding to iommu group 2
[ 4.997602] fsl_dpaa2_mac dpmac.8: Adding to iommu group 2
[ 5.008732] fsl_dpaa2_mac dpmac.7: Adding to iommu group 2
[ 5.020030] fsl_dpaa2_mac dpmac.6: Adding to iommu group 2
[ 5.031221] fsl_dpaa2_mac dpmac.6: Error connecting to the MAC endpoint
[ 5.038481] fsl_dpaa2_mac dpmac.5: Adding to iommu group 2
[ 5.049506] fsl_dpaa2_mac dpmac.5: Error connecting to the MAC endpoint
[ 5.056748] fsl_dpaa2_mac dpmac.4: Adding to iommu group 2
[ 5.067938] fsl_dpaa2_mac dpmac.4: Error connecting to the MAC endpoint
[ 5.075183] fsl_dpaa2_mac dpmac.3: Adding to iommu group 2
[ 5.086516] fsl_dpaa2_mac dpmac.3: Error connecting to the MAC endpoint
[ 5.093797] fsl_dpaa2_ptp dprtc.0: Adding to iommu group 2
[ 5.101474] ptp_qoriq: device tree node missing required elements, try
automatic configuration
[ 5.110164] pps pps0: new PPS source ptp0
[ 5.115832] fsl_mc_dpio dpio.15: Adding to iommu group 2
[ 5.124569] fsl_mc_dpio dpio.15: probed
[ 5.130509] fsl_mc_dpio dpio.14: Adding to iommu group 2
[ 5.139181] fsl_mc_dpio dpio.14: probed
[ 5.145193] fsl_mc_dpio dpio.13: Adding to iommu group 2
[ 5.154126] fsl_mc_dpio dpio.13: probed
[ 5.160046] fsl_mc_dpio dpio.12: Adding to iommu group 2
[ 5.168960] fsl_mc_dpio dpio.12: probed
[ 5.174892] fsl_mc_dpio dpio.11: Adding to iommu group 2
[ 5.183843] fsl_mc_dpio dpio.11: probed
[ 5.189869] fsl_mc_dpio dpio.10: Adding to iommu group 2
[ 5.198799] fsl_mc_dpio dpio.10: probed
[ 5.204720] fsl_mc_dpio dpio.9: Adding to iommu group 2
[ 5.213549] fsl_mc_dpio dpio.9: probed
[ 5.219377] fsl_mc_dpio dpio.8: Adding to iommu group 2
[ 5.228204] fsl_mc_dpio dpio.8: probed
[ 5.234053] fsl_mc_dpio dpio.7: Adding to iommu group 2
[ 5.242917] fsl_mc_dpio dpio.7: probed
[ 5.248846] fsl_mc_dpio dpio.6: Adding to iommu group 2
[ 5.257697] fsl_mc_dpio dpio.6: probed
[ 5.263526] fsl_mc_dpio dpio.5: Adding to iommu group 2
[ 5.272348] fsl_mc_dpio dpio.5: probed
[ 5.278189] fsl_mc_dpio dpio.4: Adding to iommu group 2
[ 5.287051] fsl_mc_dpio dpio.4: probed
[ 5.292981] fsl_mc_dpio dpio.3: Adding to iommu group 2
[ 5.301837] fsl_mc_dpio dpio.3: probed
[ 5.307678] fsl_mc_dpio dpio.2: Adding to iommu group 2
[ 5.316502] fsl_mc_dpio dpio.2: probed
[ 5.322344] fsl_mc_dpio dpio.1: Adding to iommu group 2
[ 5.331209] fsl_mc_dpio dpio.1: probed
[ 5.337135] fsl_mc_dpio dpio.0: Adding to iommu group 2
[ 5.346005] fsl_mc_dpio dpio.0: probed
[ 5.353378] fsl_mc_dprc dprc.1: DPRC device bound to driver
[ 5.359106] pcieport 0000:00:00.0: PME: Signaling with IRQ 37
[ 5.364989] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
[ 5.371394] libphy: SFP I2C Bus: probed
[ 5.375277] sfp sfp-0: Host maximum power 2.0W
[ 5.379849] sfp sfp-0: No tx_disable pin: SFP modules will always be
emitting.
[ 5.387542] libphy: SFP I2C Bus: probed
[ 5.391414] sfp sfp-1: Host maximum power 2.0W
[ 5.395969] sfp sfp-1: No tx_disable pin: SFP modules will always be
emitting.
[ 5.403656] libphy: SFP I2C Bus: probed
[ 5.407539] sfp sfp-2: Host maximum power 2.0W
[ 5.412087] sfp sfp-2: No tx_disable pin: SFP modules will always be
emitting.
[ 5.419768] libphy: SFP I2C Bus: probed
[ 5.423641] sfp sfp-3: Host maximum power 2.0W
[ 5.428194] sfp sfp-3: No tx_disable pin: SFP modules will always be
emitting.
[ 5.682724] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY
[0x0000000008b96000:01] driver [Qualcomm Atheros AR8035] (irq=POLL)
[ 5.708432] sfp sfp-0: module MikroTik S+RJ10 rev 2.16 sn
F0600340FD83 dc 210707
[ 5.737553] sfp sfp-2: module MikroTik S+RJ10 rev 2.16 sn
F06003420E92 dc 210707
[ 5.771491] sfp sfp-1: module FS SFP-10G-T rev sn
F2020490707 dc 200610
[ 5.781956] fsl_dpaa2_eth dpni.0: Probed interface eth0
[ 5.791932] fsl_dpaa2_mac dpmac.6: fsl_mc_allocate_irqs err -22
[ 5.798359] fsl_dpaa2_mac dpmac.6: fsl_mc_driver_probe failed: -14
[ 5.804555] fsl_dpaa2_mac: probe of dpmac.6 failed with error -14
[ 5.806440] sfp sfp-3: module FS SFP-10G-T rev sn
F2020490717 dc 200610
[ 5.813491] fsl_dpaa2_mac dpmac.5: fsl_mc_allocate_irqs err -22
[ 5.826558] fsl_dpaa2_mac dpmac.5: fsl_mc_driver_probe failed: -14
[ 5.832755] fsl_dpaa2_mac: probe of dpmac.5 failed with error -14
[ 5.841982] fsl_dpaa2_mac dpmac.4: fsl_mc_allocate_irqs err -22
[ 5.848409] fsl_dpaa2_mac dpmac.4: fsl_mc_driver_probe failed: -14
[ 5.854601] fsl_dpaa2_mac: probe of dpmac.4 failed with error -14
[ 5.863761] fsl_dpaa2_mac dpmac.3: fsl_mc_allocate_irqs err -22
[ 5.870190] fsl_dpaa2_mac dpmac.3: fsl_mc_driver_probe failed: -14
[ 5.876382] fsl_dpaa2_mac: probe of dpmac.3 failed with error -14
[ 5.884659] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 5.893516] ALSA device list:
[ 5.896480] No soundcards found.
[ 5.907452] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 5.915587] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 5.922867] devtmpfs: mounted
[ 5.927350] Freeing unused kernel memory: 6720K
[ 5.941541] Run /sbin/init as init process
[ 5.945642] with arguments:
[ 5.945644] /sbin/init
[ 5.945646] with environment:
[ 5.945648] HOME=/
[ 5.945649] TERM=linux
[ 6.034458] systemd[1]: System time before build time, advancing clock.
[ 6.046918] systemd[1]: systemd 245.4-4ubuntu3.18 running in system mode.
(+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2
default-hierarchy=hybrid)
[ 6.069816] systemd[1]: Detected architecture arm64.
[ 6.105963] systemd[1]: Set hostname to <nc2s5>.
[ 6.278688] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.285365] systemd[1]: system-getty.slice: unit configures an IP firewall,
but the local system does not support BPF/cgroup firewalling.
[ 6.297788] systemd[1]: (This warning is only shown for the first unit using
IP firewalling.)
[ 6.307361] systemd[1]: Created slice system-getty.slice.
[ 6.325559] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.332575] systemd[1]: Created slice system-modprobe.slice.
[ 6.353558] random: systemd: uninitialized urandom read (16 bytes read)
[ 6.360954] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 6.382344] systemd[1]: Created slice User and Session Slice.
[ 6.401732] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 6.425670] systemd[1]: Started Forward Password Requests to Wall Directory
Watch.
[ 6.449612] systemd[1]: Condition check resulted in Arbitrary Executable
File Formats File System Automount Point being skipped.
[ 6.461251] systemd[1]: Reached target Local Encrypted Volumes.
[ 6.481608] systemd[1]: Reached target Paths.
[ 6.497576] systemd[1]: Reached target Remote File Systems.
[ 6.517565] systemd[1]: Reached target Slices.
[ 6.533578] systemd[1]: Reached target Swap.
[ 6.549746] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 6.570033] systemd[1]: Listening on Journal Audit Socket.
[ 6.589811] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.609853] systemd[1]: Listening on Journal Socket.
[ 6.629836] systemd[1]: Listening on udev Control Socket.
[ 6.649732] systemd[1]: Listening on udev Kernel Socket.
[ 6.672198] systemd[1]: Mounting Huge Pages File System...
[ 6.692088] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.716204] systemd[1]: Mounting Kernel Debug File System...
[ 6.733830] systemd[1]: Condition check resulted in Kernel Trace File System
being skipped.
[ 6.744101] systemd[1]: Starting Journal Service...
[ 6.767350] systemd[1]: Condition check resulted in Create list of static
device nodes for the current kernel being skipped.
[ 6.780144] systemd[1]: Starting Load Kernel Module chromeos_pstore...
[ 6.805655] systemd[1]: Condition check resulted in Load Kernel Module drm
being skipped.
[ 6.813877] systemd[1]: Condition check resulted in Load Kernel Module
efi_pstore being skipped.
[ 6.824499] systemd[1]: Starting Load Kernel Module pstore_blk...
[ 6.848331] systemd[1]: Starting Load Kernel Module pstore_zone...
[ 6.875180] systemd[1]: Starting Load Kernel Module ramoops...
[ 6.899544] systemd[1]: Condition check resulted in Set Up Additional Binary
Formats being skipped.
[ 6.912323] systemd[1]: Starting Load Kernel Modules...
[ 6.936102] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 6.964235] systemd[1]: Starting udev Coldplug all Devices...
[ 6.985665] systemd[1]: Started Journal Service.
[ 7.226040] systemd-journald[305]: Received client request to flush runtime
journal.
[ 7.236219] systemd-journald[305]: File
/var/log/journal/411c1793e8d24b9e85330daf9431bb3a/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 8.625491] random: crng init done
[ 8.625494] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.021248] fsl_mc_allocator dpbp.2: Adding to iommu group 2
[ 9.023505] fsl_mc_allocator dpmcp.36: Adding to iommu group 2
[ 9.024384] fsl_mc_allocator dpcon.47: Adding to iommu group 2
[ 9.024503] fsl_mc_allocator dpcon.46: Adding to iommu group 2
[ 9.024611] fsl_mc_allocator dpcon.45: Adding to iommu group 2
[ 9.024727] fsl_mc_allocator dpcon.44: Adding to iommu group 2
[ 9.024843] fsl_mc_allocator dpcon.43: Adding to iommu group 2
[ 9.024994] fsl_mc_allocator dpcon.42: Adding to iommu group 2
[ 9.025149] fsl_mc_allocator dpcon.41: Adding to iommu group 2
[ 9.025301] fsl_mc_allocator dpcon.40: Adding to iommu group 2
[ 9.025575] fsl_mc_allocator dpcon.39: Adding to iommu group 2
[ 9.025830] fsl_mc_allocator dpcon.38: Adding to iommu group 2
[ 9.026113] fsl_mc_allocator dpcon.37: Adding to iommu group 2
[ 9.026571] fsl_mc_allocator dpcon.36: Adding to iommu group 2
[ 9.027012] fsl_mc_allocator dpcon.35: Adding to iommu group 2
[ 9.027397] fsl_mc_allocator dpcon.34: Adding to iommu group 2
[ 9.028019] fsl_mc_allocator dpcon.33: Adding to iommu group 2
[ 9.030049] fsl_mc_allocator dpcon.32: Adding to iommu group 2
[ 9.032430] fsl_dpaa2_eth dpni.1: Adding to iommu group 2
[ 9.222613] sfp sfp-2: Module switched to 1.5W power level
[ 9.223328] fsl_dpaa2_eth dpni.1: Probed interface eth1
[ 9.402318] fsl_dpaa2_eth dpni.1 eth1: configuring for inband/10gbase-r link
mode
[ 10.424085] fsl_dpaa2_eth dpni.1 eth1: Link is Up - 10Gbps/Full - flow
control off
[ 10.424140] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 139.469603] vfio-fsl-mc dprc.2: DMA mask not set
[ 139.469770] vfio-fsl-mc dprc.2: Adding to iommu group 3
[ 139.517368] fsl-mc dpbp.18: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.517448] vfio-fsl-mc dpbp.18: Adding to iommu group 3
[ 139.518701] fsl-mc dpbp.17: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.518881] vfio-fsl-mc dpbp.17: Adding to iommu group 3
[ 139.518969] fsl-mc dpbp.16: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.519113] vfio-fsl-mc dpbp.16: Adding to iommu group 3
[ 139.519197] fsl-mc dpbp.15: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.519311] vfio-fsl-mc dpbp.15: Adding to iommu group 3
[ 139.519397] fsl-mc dpbp.14: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.519506] vfio-fsl-mc dpbp.14: Adding to iommu group 3
[ 139.519579] fsl-mc dpbp.13: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.519687] vfio-fsl-mc dpbp.13: Adding to iommu group 3
[ 139.519842] fsl-mc dpbp.12: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.519961] vfio-fsl-mc dpbp.12: Adding to iommu group 3
[ 139.520036] fsl-mc dpbp.11: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.520146] vfio-fsl-mc dpbp.11: Adding to iommu group 3
[ 139.520221] fsl-mc dpbp.10: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.520346] vfio-fsl-mc dpbp.10: Adding to iommu group 3
[ 139.520420] fsl-mc dpbp.9: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.520560] vfio-fsl-mc dpbp.9: Adding to iommu group 3
[ 139.520636] fsl-mc dpbp.8: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.520808] vfio-fsl-mc dpbp.8: Adding to iommu group 3
[ 139.520896] fsl-mc dpbp.7: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.521045] vfio-fsl-mc dpbp.7: Adding to iommu group 3
[ 139.521130] fsl-mc dpbp.6: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.521257] vfio-fsl-mc dpbp.6: Adding to iommu group 3
[ 139.521335] fsl-mc dpbp.5: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.521456] vfio-fsl-mc dpbp.5: Adding to iommu group 3
[ 139.521530] fsl-mc dpbp.4: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.521663] vfio-fsl-mc dpbp.4: Adding to iommu group 3
[ 139.521749] fsl-mc dpbp.3: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.521860] vfio-fsl-mc dpbp.3: Adding to iommu group 3
[ 139.522447] fsl-mc dpmcp.40: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.522566] vfio-fsl-mc dpmcp.40: Adding to iommu group 3
[ 139.523867] fsl-mc dpmcp.39: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.524056] vfio-fsl-mc dpmcp.39: Adding to iommu group 3
[ 139.525629] fsl-mc dpmcp.38: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.525726] vfio-fsl-mc dpmcp.38: Adding to iommu group 3
[ 139.525877] fsl-mc dpcon.55: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.525950] vfio-fsl-mc dpcon.55: Adding to iommu group 3
[ 139.526035] fsl-mc dpcon.54: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.526136] vfio-fsl-mc dpcon.54: Adding to iommu group 3
[ 139.526309] fsl-mc dpcon.53: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.526409] vfio-fsl-mc dpcon.53: Adding to iommu group 3
[ 139.526495] fsl-mc dpcon.52: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.526572] vfio-fsl-mc dpcon.52: Adding to iommu group 3
[ 139.526664] fsl-mc dpcon.51: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.526811] vfio-fsl-mc dpcon.51: Adding to iommu group 3
[ 139.526906] fsl-mc dpcon.50: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527014] vfio-fsl-mc dpcon.50: Adding to iommu group 3
[ 139.527106] fsl-mc dpcon.49: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527177] vfio-fsl-mc dpcon.49: Adding to iommu group 3
[ 139.527266] fsl-mc dpcon.48: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527349] vfio-fsl-mc dpcon.48: Adding to iommu group 3
[ 139.527411] fsl-mc dpni.4: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527473] vfio-fsl-mc dpni.4: Adding to iommu group 3
[ 139.527532] fsl-mc dpni.3: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527591] vfio-fsl-mc dpni.3: Adding to iommu group 3
[ 139.527645] fsl-mc dpni.2: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527723] vfio-fsl-mc dpni.2: Adding to iommu group 3
[ 139.527815] fsl-mc dpci.1: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.527878] vfio-fsl-mc dpci.1: Adding to iommu group 3
[ 139.527934] fsl-mc dpci.0: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.528097] vfio-fsl-mc dpci.0: Adding to iommu group 3
[ 139.528245] fsl-mc dpseci.16: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.528412] vfio-fsl-mc dpseci.16: Adding to iommu group 3
[ 139.528525] fsl-mc dpseci.15: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.528655] vfio-fsl-mc dpseci.15: Adding to iommu group 3
[ 139.528849] fsl-mc dpseci.14: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.528976] vfio-fsl-mc dpseci.14: Adding to iommu group 3
[ 139.529066] fsl-mc dpseci.13: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.529130] vfio-fsl-mc dpseci.13: Adding to iommu group 3
[ 139.529220] fsl-mc dpseci.12: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.529336] vfio-fsl-mc dpseci.12: Adding to iommu group 3
[ 139.529432] fsl-mc dpseci.11: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.529495] vfio-fsl-mc dpseci.11: Adding to iommu group 3
[ 139.529575] fsl-mc dpseci.10: VFIO_FSL_MC: Setting driver override for
device in dprc dprc.2
[ 139.529649] vfio-fsl-mc dpseci.10: Adding to iommu group 3
[ 139.529769] fsl-mc dpseci.9: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.529944] vfio-fsl-mc dpseci.9: Adding to iommu group 3
[ 139.530097] fsl-mc dpseci.8: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.530236] vfio-fsl-mc dpseci.8: Adding to iommu group 3
[ 139.530303] fsl-mc dpseci.7: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.530424] vfio-fsl-mc dpseci.7: Adding to iommu group 3
[ 139.530565] fsl-mc dpseci.6: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.530710] vfio-fsl-mc dpseci.6: Adding to iommu group 3
[ 139.530819] fsl-mc dpseci.5: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.530917] vfio-fsl-mc dpseci.5: Adding to iommu group 3
[ 139.530980] fsl-mc dpseci.4: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.531048] vfio-fsl-mc dpseci.4: Adding to iommu group 3
[ 139.531165] fsl-mc dpseci.3: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.531251] vfio-fsl-mc dpseci.3: Adding to iommu group 3
[ 139.531342] fsl-mc dpseci.2: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.531433] vfio-fsl-mc dpseci.2: Adding to iommu group 3
[ 139.531603] fsl-mc dpseci.1: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.531833] vfio-fsl-mc dpseci.1: Adding to iommu group 3
[ 139.532038] fsl-mc dpdmai.7: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.532231] vfio-fsl-mc dpdmai.7: Adding to iommu group 3
[ 139.532422] fsl-mc dpdmai.6: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.532630] vfio-fsl-mc dpdmai.6: Adding to iommu group 3
[ 139.532867] fsl-mc dpdmai.5: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.533041] vfio-fsl-mc dpdmai.5: Adding to iommu group 3
[ 139.533245] fsl-mc dpdmai.4: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.533473] vfio-fsl-mc dpdmai.4: Adding to iommu group 3
[ 139.533664] fsl-mc dpdmai.3: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.533808] vfio-fsl-mc dpdmai.3: Adding to iommu group 3
[ 139.534090] fsl-mc dpdmai.2: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.534217] vfio-fsl-mc dpdmai.2: Adding to iommu group 3
[ 139.534364] fsl-mc dpdmai.1: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.534481] vfio-fsl-mc dpdmai.1: Adding to iommu group 3
[ 139.534611] fsl-mc dpdmai.0: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.534719] vfio-fsl-mc dpdmai.0: Adding to iommu group 3
[ 139.537429] fsl-mc dpio.49: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.537626] vfio-fsl-mc dpio.49: Adding to iommu group 3
[ 139.541228] fsl-mc dpio.48: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.541690] vfio-fsl-mc dpio.48: Adding to iommu group 3
[ 139.545189] fsl-mc dpio.47: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.545319] vfio-fsl-mc dpio.47: Adding to iommu group 3
[ 139.549063] fsl-mc dpio.46: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.549604] vfio-fsl-mc dpio.46: Adding to iommu group 3
[ 139.553547] fsl-mc dpio.45: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.554129] vfio-fsl-mc dpio.45: Adding to iommu group 3
[ 139.559076] fsl-mc dpio.44: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.561090] vfio-fsl-mc dpio.44: Adding to iommu group 3
[ 139.563303] fsl-mc dpio.43: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.564193] vfio-fsl-mc dpio.43: Adding to iommu group 3
[ 139.567476] fsl-mc dpio.42: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.567659] vfio-fsl-mc dpio.42: Adding to iommu group 3
[ 139.569442] fsl-mc dpio.41: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.569622] vfio-fsl-mc dpio.41: Adding to iommu group 3
[ 139.571297] fsl-mc dpio.40: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.571467] vfio-fsl-mc dpio.40: Adding to iommu group 3
[ 139.574850] fsl-mc dpio.39: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.574955] vfio-fsl-mc dpio.39: Adding to iommu group 3
[ 139.577825] fsl-mc dpio.38: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.577948] vfio-fsl-mc dpio.38: Adding to iommu group 3
[ 139.579517] fsl-mc dpio.37: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.579591] vfio-fsl-mc dpio.37: Adding to iommu group 3
[ 139.581162] fsl-mc dpio.36: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.581230] vfio-fsl-mc dpio.36: Adding to iommu group 3
[ 139.582790] fsl-mc dpio.35: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.582857] vfio-fsl-mc dpio.35: Adding to iommu group 3
[ 139.585515] fsl-mc dpio.34: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.585741] vfio-fsl-mc dpio.34: Adding to iommu group 3
[ 139.587396] fsl-mc dpio.33: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.587526] vfio-fsl-mc dpio.33: Adding to iommu group 3
[ 139.589201] fsl-mc dpio.32: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.589278] vfio-fsl-mc dpio.32: Adding to iommu group 3
[ 139.590838] fsl-mc dpio.31: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.590908] vfio-fsl-mc dpio.31: Adding to iommu group 3
[ 139.592471] fsl-mc dpio.30: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.592543] vfio-fsl-mc dpio.30: Adding to iommu group 3
[ 139.594100] fsl-mc dpio.29: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.594166] vfio-fsl-mc dpio.29: Adding to iommu group 3
[ 139.597399] fsl-mc dpio.28: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.597473] vfio-fsl-mc dpio.28: Adding to iommu group 3
[ 139.600183] fsl-mc dpio.27: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.600320] vfio-fsl-mc dpio.27: Adding to iommu group 3
[ 139.601906] fsl-mc dpio.26: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.602002] vfio-fsl-mc dpio.26: Adding to iommu group 3
[ 139.603576] fsl-mc dpio.25: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.603663] vfio-fsl-mc dpio.25: Adding to iommu group 3
[ 139.606293] fsl-mc dpio.24: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.606416] vfio-fsl-mc dpio.24: Adding to iommu group 3
[ 139.609674] fsl-mc dpio.23: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.609751] vfio-fsl-mc dpio.23: Adding to iommu group 3
[ 139.611314] fsl-mc dpio.22: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.611383] vfio-fsl-mc dpio.22: Adding to iommu group 3
[ 139.612958] fsl-mc dpio.21: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.613026] vfio-fsl-mc dpio.21: Adding to iommu group 3
[ 139.614586] fsl-mc dpio.20: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.614648] vfio-fsl-mc dpio.20: Adding to iommu group 3
[ 139.616219] fsl-mc dpio.19: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.616297] vfio-fsl-mc dpio.19: Adding to iommu group 3
[ 139.617856] fsl-mc dpio.18: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.617920] vfio-fsl-mc dpio.18: Adding to iommu group 3
[ 139.619481] fsl-mc dpio.17: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.619546] vfio-fsl-mc dpio.17: Adding to iommu group 3
[ 139.622146] fsl-mc dpio.16: VFIO_FSL_MC: Setting driver override for device
in dprc dprc.2
[ 139.622290] vfio-fsl-mc dpio.16: Adding to iommu group 3
[ 230.577417] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 230.598547] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 232.636012] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Up - 10Gbps/Full - flow control off
[ 232.667590] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 262.570161] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 264.635873] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 295.216244] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Down
[ 295.218802] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Down
[ 295.219978] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Down
[ 326.380066] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 326.401143] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 326.425419] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 328.447416] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 328.453453] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Up - 10Gbps/Full - flow control off
[ 328.478919] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 332.148932] sfp sfp-1: failed to read SFP soft status: -110
[ 333.105481] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Down
[ 333.107631] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Down
[ 333.108939] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Down
[ 447.514266] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 447.539074] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[ 449.569567] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 449.601546] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[ 523.156668] sfp sfp-1: failed to read SFP soft status: -110
[ 523.804720] sfp sfp-1: failed to read SFP soft status: -110
[ 524.113523] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Down
[ 524.115105] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Down
[48625.297583] sfp sfp-3: module removed
[48640.943419] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48640.964621] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48640.988828] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48642.009515] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[48642.015206] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[48645.467112] sfp sfp-1: failed to read SFP soft status: -110
[48646.103130] sfp sfp-1: failed to read SFP soft status: -110
[48646.412162] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Down
[48646.413748] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Down
[48654.369114] sfp sfp-1: module removed
[48666.977486] sfp sfp-1: module OEM SFP+ SR rev A sn
PH69814275 dc 190820
[48677.346173] sfp sfp-3: module OEM SFP+ SR rev A sn
PH69814278 dc 190820
[48799.965183] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48799.986618] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48800.010916] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized):
configuring for inband/10gbase-r link mode
[48800.054335] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[48802.078393] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Up - 10Gbps/Full - flow control off
[48853.220077] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Up - 10Gbps/Full - flow control off
[49171.923836] fsl_dpaa2_mac dpmac.10 (unnamed net_device) (uninitialized):
Link is Down
[49171.926012] fsl_dpaa2_mac dpmac.8 (unnamed net_device) (uninitialized): Link
is Down
[49171.927600] fsl_dpaa2_mac dpmac.7 (unnamed net_device) (uninitialized): Link
is Down
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#22263): https://lists.fd.io/g/vpp-dev/message/22263
Mute This Topic: https://lists.fd.io/mt/95379828/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
