my topology is below: In my original imagination, I want config bvi loop1 and loop2 on bridge 3.
but one bridge only have one bvi, so I have to move two loop bvi, to bridge1 and bridge 2, and link bridge 1/2 to bridge 3 with pipe, and then I found pipe-rx not support tag traffic bvi loop1.vlan1 (192.168.0.1/24) bvi loop2.vlan2 (192.168.1.1/24) | | | | | | ---------------- --------------- | | | | | bridge 1 | | bridge 2 | | | -------------------- ---------------------| | | | | | | | ---------------- | | --------------- | | | | --------------- | | | bridge 3 | | | | | --------------- | | input packet with vlan tag
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21555): https://lists.fd.io/g/vpp-dev/message/21555 Mute This Topic: https://lists.fd.io/mt/91870460/21656 Mute #vlan:https://lists.fd.io/g/vpp-dev/mutehashtag/vlan Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
