Hi, We are trying to create a lacp bond interface on VPP v21.06. Below is the configuration we are trying:-
vpp# create bond mode lacp id 0 vpp# set int state BondEthernet0 up vpp# bond add BondEthernet0 GigabitEthernet7/0/0 vpp# bond add BondEthernet0 GigabitEthernet8/0/0 vpp# set int state GigabitEthernet7/0/0 up vpp# set int state GigabitEthernet8/0/0 up The command "sh bond" gives below output:- vpp# sh bond interface name sw_if_index mode load balance active members members BondEthernet0 3 lacp l2 0 2 vpp# Here "active members" count is 0 and hence the bond interface is not working. Are we missing out anything from the configuration point of view? Thanks and Regards, Chinmaya Agarwal.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21528): https://lists.fd.io/g/vpp-dev/message/21528 Mute This Topic: https://lists.fd.io/mt/91723467/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
