Hi Maciek, Peter, and Vratko,
I am working on the ipsec policy mode optimization - the idea is after the change the policy adding time is to be massively reduced (less than 10sec to add 1M flows). However during work on this implementation, we found the existing policy adding has a problem: if the policy protocol is missing we used 0 as wildcard value - however this is wrong as 0 is a valid protocol ID. We've changed it to 255 (reserved) in this patch but it causes CSIT test failure - which we do believe it is caused by the default 0 used in CSIT side. Could you instruct us how to deal with it? BR, Piotr -------------------------------------------------------------- Intel Research and Development Ireland Limited Registered in Ireland Registered Office: Collinstown Industrial Park, Leixlip, County Kildare Registered Number: 308263 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#21521): https://lists.fd.io/g/vpp-dev/message/21521 Mute This Topic: https://lists.fd.io/mt/91643982/21656 Group Owner: vpp-dev+ow...@lists.fd.io Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-
